A comparison of different modeling approaches for the simulation of the transient and steady-state behavior of continuous emulsion polymerizations in pulsed tubular reactors (2002)
- Authors:
- USP affiliated authors: GIUDICI, REINALDO - EP ; SAYER, CLAUDIA - EP
- Unidade: EP
- DOI: 10.1590/S0104-66322002000100007
- Subjects: POLIMERIZAÇÃO (SIMULAÇÃO); MODELOS MATEMÁTICOS
- Language: Inglês
- Abstract: Dynamic mathematical models are developed to simulate styrene emulsion polymerization reactions carried out in pulsed tubular reactors.Two different modeling approaches, the tanks-in-series model and the axial dispersion model, are compared. The models developed were validated with experimental data from the literature and used to study the dynamics during transient periods, e.g., the start-up of the reactor and the response to disturbances. The effect of the Peclet number on process variables such as conversion and particle concentration was also verified
- Imprenta:
- Source:
- Título: Brazilian Journal of Chemical Engineering
- ISSN: 0104-6632
- Volume/Número/Paginação/Ano: v. 19, n 01, p. 89-103, 2002
- Este periódico é de acesso aberto
- Este artigo NÃO é de acesso aberto
-
ABNT
SAYER, Claudia e GIUDICI, Reinaldo. A comparison of different modeling approaches for the simulation of the transient and steady-state behavior of continuous emulsion polymerizations in pulsed tubular reactors. Brazilian Journal of Chemical Engineering, v. 19, p. 89-103, 2002Tradução . . Disponível em: https://doi.org/10.1590/S0104-66322002000100007. Acesso em: 22 jan. 2026. -
APA
Sayer, C., & Giudici, R. (2002). A comparison of different modeling approaches for the simulation of the transient and steady-state behavior of continuous emulsion polymerizations in pulsed tubular reactors. Brazilian Journal of Chemical Engineering, 19, 89-103. doi:10.1590/S0104-66322002000100007 -
NLM
Sayer C, Giudici R. A comparison of different modeling approaches for the simulation of the transient and steady-state behavior of continuous emulsion polymerizations in pulsed tubular reactors [Internet]. Brazilian Journal of Chemical Engineering. 2002 ; 19 89-103.[citado 2026 jan. 22 ] Available from: https://doi.org/10.1590/S0104-66322002000100007 -
Vancouver
Sayer C, Giudici R. A comparison of different modeling approaches for the simulation of the transient and steady-state behavior of continuous emulsion polymerizations in pulsed tubular reactors [Internet]. Brazilian Journal of Chemical Engineering. 2002 ; 19 89-103.[citado 2026 jan. 22 ] Available from: https://doi.org/10.1590/S0104-66322002000100007 - Optimization of continuous emulsion copolymerization reactions in a pulsed sieve plate column reactor
- Butyl acrylate and vinyl acetate semicontinuous emulsion copolymerizations: Study of stabilization performance
- Reduçao do teor de monômero residual do copolímero estireno-acrilato de butila produzido em emulsão a partir do teor de acrilato de butila obtido por infra-vermelho próximo.
- Reply to the comments on the paper titled “Hydrolysis of acetic anhydride: non-adiabatic calorimetric determination of kinetics and heat exchange” [Wilson H. Hirota, Rodolfo B. Rodrigues, Claudia Sayer, Reinaldo Giudici, Chemical Engineering Science 65 (2010) 3849–3858]
- Estudo das técnicas de determinação da conversão em reações de polimerizacão em suspensão
- Development of a continuous emulsion copolymerization process in a tubular reactor. Copolymer composition optimization employing mathematical model simulation.
- Monitoring of polymerization processes by spectroscopic techniques
- Effect of feeding strategies on the evolution of glass-transition temperature during VA-BA emulsion copolymerization
- In-line monitoring of particle size during emulsion polymerization under different operational conditions usig NIR spectroscopy
- Reações semicontínuas de copolimerização em emulsão de estireno-butadieno: estudo experimental visando o aumento da velocidade da reação
Informações sobre o DOI: 10.1590/S0104-66322002000100007 (Fonte: oaDOI API)
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
