ReP USP - Resultado da busca

Artigo de periodico
Artiﬁcial intelligence and machine learning in tribology: selected case studies and overall potential (2025)
Raj Shah ; Jaramillo, Rudy; Thomas, Garvin; Rayhan, Thohid; Hossain, Nayem ; Kchaou, Mohamed ; Profito, Francisco José ; Rosenkranz, Andreas
Fonte: Advanced engineering materials. Unidade: EP
Assuntos: INTELIGÊNCIA ARTIFICIAL, APRENDIZADO COMPUTACIONAL, TRIBOLOGIA, ATRITO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAJ SHAH, et al. Artiﬁcial intelligence and machine learning in tribology: selected case studies and overall potential. Advanced engineering materials, p. 1-14, 2025Tradução . . Disponível em: https://doi.org/10.1002/adem.202401944. Acesso em: 27 nov. 2025.
APA
Raj Shah,, Jaramillo, R., Thomas, G., Rayhan, T., Hossain, N., Kchaou, M., et al. (2025). Artiﬁcial intelligence and machine learning in tribology: selected case studies and overall potential. Advanced engineering materials, 1-14. doi:10.1002/adem.202401944
NLM
Raj Shah, Jaramillo R, Thomas G, Rayhan T, Hossain N, Kchaou M, Profito FJ, Rosenkranz A. Artiﬁcial intelligence and machine learning in tribology: selected case studies and overall potential [Internet]. Advanced engineering materials. 2025 ; 1-14.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1002/adem.202401944
Vancouver
Raj Shah, Jaramillo R, Thomas G, Rayhan T, Hossain N, Kchaou M, Profito FJ, Rosenkranz A. Artiﬁcial intelligence and machine learning in tribology: selected case studies and overall potential [Internet]. Advanced engineering materials. 2025 ; 1-14.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1002/adem.202401944
Artigo de periodico
Deterministic simulation of surface textures for the piston ring/cylinder liner system in a free piston linear engine (2024)
Luz, Felipe Kevin Correia ; Profito, Francisco José ; Santos, Marcelo Braga dos ; Silva, Samuel Anísio Nunes ; Murray, Henara Lillian Costa
Fonte: Lubricants. Unidade: EP
Assuntos: PISTÕES, LUBRIFICAÇÃO, FONTES RENOVÁVEIS DE ENERGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LUZ, Felipe Kevin Correia et al. Deterministic simulation of surface textures for the piston ring/cylinder liner system in a free piston linear engine. Lubricants, v. 12, n. Ja 2024, p. 1-16, 2024Tradução . . Disponível em: https://doi.org/10.3390/lubricants12010012. Acesso em: 27 nov. 2025.
APA
Luz, F. K. C., Profito, F. J., Santos, M. B. dos, Silva, S. A. N., & Murray, H. L. C. (2024). Deterministic simulation of surface textures for the piston ring/cylinder liner system in a free piston linear engine. Lubricants, 12( Ja 2024), 1-16. doi:10.3390/lubricants12010012
NLM
Luz FKC, Profito FJ, Santos MB dos, Silva SAN, Murray HLC. Deterministic simulation of surface textures for the piston ring/cylinder liner system in a free piston linear engine [Internet]. Lubricants. 2024 ; 12( Ja 2024): 1-16.[citado 2025 nov. 27 ] Available from: https://doi.org/10.3390/lubricants12010012
Vancouver
Luz FKC, Profito FJ, Santos MB dos, Silva SAN, Murray HLC. Deterministic simulation of surface textures for the piston ring/cylinder liner system in a free piston linear engine [Internet]. Lubricants. 2024 ; 12( Ja 2024): 1-16.[citado 2025 nov. 27 ] Available from: https://doi.org/10.3390/lubricants12010012
Artigo de periodico
Numerical and experimental investigation of textured journal bearings for friction reduction (2024)
Profito, Francisco José ; Vlãdescu, Sorin-Cristian ; Reddyhoff, Thomas ; Dini, Daniele
Fonte: Tribology international. Unidade: EP
Assuntos: TRIBOLOGIA, ATRITO, LUBRIFICAÇÃO, MANCAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROFITO, Francisco José et al. Numerical and experimental investigation of textured journal bearings for friction reduction. Tribology international, v. 195, p. 1-16, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2024.109643. Acesso em: 27 nov. 2025.
APA
Profito, F. J., Vlãdescu, S. -C., Reddyhoff, T., & Dini, D. (2024). Numerical and experimental investigation of textured journal bearings for friction reduction. Tribology international, 195, 1-16. doi:10.1016/j.triboint.2024.109643
NLM
Profito FJ, Vlãdescu S-C, Reddyhoff T, Dini D. Numerical and experimental investigation of textured journal bearings for friction reduction [Internet]. Tribology international. 2024 ; 195 1-16.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2024.109643
Vancouver
Profito FJ, Vlãdescu S-C, Reddyhoff T, Dini D. Numerical and experimental investigation of textured journal bearings for friction reduction [Internet]. Tribology international. 2024 ; 195 1-16.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2024.109643
Artigo de periodico
Exploring the potential of graphene nanoplatelets as a lubricant additive: topography evolution and performance under boundary lubrication conditions (2024)
Oliveira, Davi Franzosi de ; Queiróz, João Carlos Fernandes de; Tomanik, Antonio Eduardo Meirelles ; Christinelli, Wania Aparecida ; Profito, Francisco José ; Souza, Roberto Martins de
Fonte: Tribology international. Unidade: EP
Assuntos: TRIBOLOGIA, MATERIAIS NANOESTRUTURADOS, LUBRIFICAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Davi Franzosi de et al. Exploring the potential of graphene nanoplatelets as a lubricant additive: topography evolution and performance under boundary lubrication conditions. Tribology international, v. 192, p. 1-12, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2024.109282. Acesso em: 27 nov. 2025.
APA
Oliveira, D. F. de, Queiróz, J. C. F. de, Tomanik, A. E. M., Christinelli, W. A., Profito, F. J., & Souza, R. M. de. (2024). Exploring the potential of graphene nanoplatelets as a lubricant additive: topography evolution and performance under boundary lubrication conditions. Tribology international, 192, 1-12. doi:10.1016/j.triboint.2024.109282
NLM
Oliveira DF de, Queiróz JCF de, Tomanik AEM, Christinelli WA, Profito FJ, Souza RM de. Exploring the potential of graphene nanoplatelets as a lubricant additive: topography evolution and performance under boundary lubrication conditions [Internet]. Tribology international. 2024 ; 192 1-12.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2024.109282
Vancouver
Oliveira DF de, Queiróz JCF de, Tomanik AEM, Christinelli WA, Profito FJ, Souza RM de. Exploring the potential of graphene nanoplatelets as a lubricant additive: topography evolution and performance under boundary lubrication conditions [Internet]. Tribology international. 2024 ; 192 1-12.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2024.109282
Artigo de periodico
The use of Powder Metallurgy for promoting friction reduction under sliding-rolling lubricated conditions (2021)
Boidi, Guido ; Profito, Francisco José ; Kadiric, A; Machado, Izabel Fernanda ; Din, D
Fonte: Tribology International. Unidade: EP
Assuntos: FILMES FINOS, METALURGIA DO PÓ, ROLAMENTOS, SINTERIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BOIDI, Guido et al. The use of Powder Metallurgy for promoting friction reduction under sliding-rolling lubricated conditions. Tribology International, v. 157, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2021.106892. Acesso em: 27 nov. 2025.
APA
Boidi, G., Profito, F. J., Kadiric, A., Machado, I. F., & Din, D. (2021). The use of Powder Metallurgy for promoting friction reduction under sliding-rolling lubricated conditions. Tribology International, 157, 1-10. doi:10.1016/j.triboint.2021.106892
NLM
Boidi G, Profito FJ, Kadiric A, Machado IF, Din D. The use of Powder Metallurgy for promoting friction reduction under sliding-rolling lubricated conditions [Internet]. Tribology International. 2021 ; 157 1-10.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2021.106892
Vancouver
Boidi G, Profito FJ, Kadiric A, Machado IF, Din D. The use of Powder Metallurgy for promoting friction reduction under sliding-rolling lubricated conditions [Internet]. Tribology International. 2021 ; 157 1-10.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2021.106892
Artigo de periodico
Combined lubricant–surface system approach for potential passenger car CO2 reduction on piston-ring-cylinder bore assembly (2020)
Tomanik, Antonio Eduardo Meirelles; Profito, Francisco José ; Sheets, Brett; Souza, Roberto Martins de
Fonte: Tribology International. Unidade: EP
Assuntos: PISTÕES, FRICÇÃO, LUBRIFICANTES, ATRITO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOMANIK, Antonio Eduardo Meirelles et al. Combined lubricant–surface system approach for potential passenger car CO2 reduction on piston-ring-cylinder bore assembly. Tribology International, v. 149, p. 1-12, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2018.12.014. Acesso em: 27 nov. 2025.
APA
Tomanik, A. E. M., Profito, F. J., Sheets, B., & Souza, R. M. de. (2020). Combined lubricant–surface system approach for potential passenger car CO2 reduction on piston-ring-cylinder bore assembly. Tribology International, 149, 1-12. doi:10.1016/j.triboint.2018.12.014
NLM
Tomanik AEM, Profito FJ, Sheets B, Souza RM de. Combined lubricant–surface system approach for potential passenger car CO2 reduction on piston-ring-cylinder bore assembly [Internet]. Tribology International. 2020 ;149 1-12.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2018.12.014
Vancouver
Tomanik AEM, Profito FJ, Sheets B, Souza RM de. Combined lubricant–surface system approach for potential passenger car CO2 reduction on piston-ring-cylinder bore assembly [Internet]. Tribology International. 2020 ;149 1-12.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2018.12.014
Artigo de periodico
Comparison of unidirectional and reciprocating tribometers in tests with MoDTC-containing oils under boundary lubrication (2019)
Balarini Junior, Roberto; Diniz, Gabriel Alves da Silva Diniz; Profito, Francisco José ; Souza, Roberto Martins de
Fonte: Tribology International. Unidade: EP
Assuntos: TRIBOLOGIA, LUBRIFICANTES, ATRITO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BALARINI JUNIOR, Roberto et al. Comparison of unidirectional and reciprocating tribometers in tests with MoDTC-containing oils under boundary lubrication. Tribology International, p. 1-10, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2019.03.044. Acesso em: 27 nov. 2025.
APA
Balarini Junior, R., Diniz, G. A. da S. D., Profito, F. J., & Souza, R. M. de. (2019). Comparison of unidirectional and reciprocating tribometers in tests with MoDTC-containing oils under boundary lubrication. Tribology International, 1-10. doi:10.1016/j.triboint.2019.03.044
NLM
Balarini Junior R, Diniz GA da SD, Profito FJ, Souza RM de. Comparison of unidirectional and reciprocating tribometers in tests with MoDTC-containing oils under boundary lubrication [Internet]. Tribology International. 2019 ; 1-10.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2019.03.044
Vancouver
Balarini Junior R, Diniz GA da SD, Profito FJ, Souza RM de. Comparison of unidirectional and reciprocating tribometers in tests with MoDTC-containing oils under boundary lubrication [Internet]. Tribology International. 2019 ; 1-10.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2019.03.044
Artigo de periodico
Influence of surface texturing on hydrodynamic friction in plane converging bearings: an experimental and numerical approach (2019)
Rosenkranz, Andreas; Costa, Henara L; Profito, Francisco José ; Gachot, Carsten; Medina, Simon; Dini, Daniele
Fonte: Tribology International. Unidade: EP
Assuntos: TRIBOLOGIA, RUGOSIDADE SUPERFICIAL, TRATAMENTO DE SUPERFÍCIES, LUBRIFICAÇÃO, HIDRODINÂMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROSENKRANZ, Andreas et al. Influence of surface texturing on hydrodynamic friction in plane converging bearings: an experimental and numerical approach. Tribology International, v. 134, n. ju 2019, p. 190-204, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2019.01.042. Acesso em: 27 nov. 2025.
APA
Rosenkranz, A., Costa, H. L., Profito, F. J., Gachot, C., Medina, S., & Dini, D. (2019). Influence of surface texturing on hydrodynamic friction in plane converging bearings: an experimental and numerical approach. Tribology International, 134( ju 2019), 190-204. doi:10.1016/j.triboint.2019.01.042
NLM
Rosenkranz A, Costa HL, Profito FJ, Gachot C, Medina S, Dini D. Influence of surface texturing on hydrodynamic friction in plane converging bearings: an experimental and numerical approach [Internet]. Tribology International. 2019 ; 134( ju 2019): 190-204.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2019.01.042
Vancouver
Rosenkranz A, Costa HL, Profito FJ, Gachot C, Medina S, Dini D. Influence of surface texturing on hydrodynamic friction in plane converging bearings: an experimental and numerical approach [Internet]. Tribology International. 2019 ; 134( ju 2019): 190-204.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2019.01.042
Artigo de periodico
Partitioned fluid-structure interaction technique applied to the mixed-elastohydrodynamic solution of dynamically loaded connecting-rod big-end bearings (2019)
Profito, Francisco José ; Zachariadis, Demétrio Cornilios ; Dini, Daniele
Fonte: Tribology International. Unidade: EP
Assuntos: INTERAÇÃO FLUIDO-ESTRUTURA, ROLAMENTOS, HIDRODINÂMICA, ESCOAMENTO MULTIFÁSICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROFITO, Francisco José e ZACHARIADIS, Demétrio Cornilios e DINI, Daniele. Partitioned fluid-structure interaction technique applied to the mixed-elastohydrodynamic solution of dynamically loaded connecting-rod big-end bearings. Tribology International, v. 140, p. 1-25, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2019.05.007. Acesso em: 27 nov. 2025.
APA
Profito, F. J., Zachariadis, D. C., & Dini, D. (2019). Partitioned fluid-structure interaction technique applied to the mixed-elastohydrodynamic solution of dynamically loaded connecting-rod big-end bearings. Tribology International, 140, 1-25. doi:10.1016/j.triboint.2019.05.007
NLM
Profito FJ, Zachariadis DC, Dini D. Partitioned fluid-structure interaction technique applied to the mixed-elastohydrodynamic solution of dynamically loaded connecting-rod big-end bearings [Internet]. Tribology International. 2019 ; 140 1-25.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2019.05.007
Vancouver
Profito FJ, Zachariadis DC, Dini D. Partitioned fluid-structure interaction technique applied to the mixed-elastohydrodynamic solution of dynamically loaded connecting-rod big-end bearings [Internet]. Tribology International. 2019 ; 140 1-25.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2019.05.007
Artigo de periodico
Effect of laser surface texturing on friction behaviour in elastohydrodynamically lubricated point contacts under different sliding-rolling conditions (2019)
Boidi, Guido ; Tertuliano, Iramar da Silva ; Profito, Francisco José ; Rossi, Wagner de ; Machado, Izabel Fernanda
Fonte: Tribology International. Unidade: EP
Assuntos: TRIBOLOGIA, LUBRIFICANTES, ATRITO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BOIDI, Guido et al. Effect of laser surface texturing on friction behaviour in elastohydrodynamically lubricated point contacts under different sliding-rolling conditions. Tribology International, p. 1-9, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2019.02.021. Acesso em: 27 nov. 2025.
APA
Boidi, G., Tertuliano, I. da S., Profito, F. J., Rossi, W. de, & Machado, I. F. (2019). Effect of laser surface texturing on friction behaviour in elastohydrodynamically lubricated point contacts under different sliding-rolling conditions. Tribology International, 1-9. doi:10.1016/j.triboint.2019.02.021
NLM
Boidi G, Tertuliano I da S, Profito FJ, Rossi W de, Machado IF. Effect of laser surface texturing on friction behaviour in elastohydrodynamically lubricated point contacts under different sliding-rolling conditions [Internet]. Tribology International. 2019 ; 1-9.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2019.02.021
Vancouver
Boidi G, Tertuliano I da S, Profito FJ, Rossi W de, Machado IF. Effect of laser surface texturing on friction behaviour in elastohydrodynamically lubricated point contacts under different sliding-rolling conditions [Internet]. Tribology International. 2019 ; 1-9.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2019.02.021
Artigo de periodico
Porosity effect of sintered steel on the frictional performance of conformal and nonconformal lubricated contacts (2019)
Boidi, Guido ; Tertuliano, Iramar da Silva ; Lima, Luiz Gustavo del Bianchi da Silva ; Profito, Francisco José ; Machado, Izabel Fernanda
Fonte: Tribology Transactions. Unidade: EP
Assuntos: ATRITO, MATERIAIS, FRICÇÃO, SINTERIZAÇÃO, LUBRIFICAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BOIDI, Guido et al. Porosity effect of sintered steel on the frictional performance of conformal and nonconformal lubricated contacts. Tribology Transactions, p. 1-13, 2019Tradução . . Disponível em: https://doi.org/10.1080/10402004.2019.1640917. Acesso em: 27 nov. 2025.
APA
Boidi, G., Tertuliano, I. da S., Lima, L. G. del B. da S., Profito, F. J., & Machado, I. F. (2019). Porosity effect of sintered steel on the frictional performance of conformal and nonconformal lubricated contacts. Tribology Transactions, 1-13. doi:10.1080/10402004.2019.1640917
NLM
Boidi G, Tertuliano I da S, Lima LG del B da S, Profito FJ, Machado IF. Porosity effect of sintered steel on the frictional performance of conformal and nonconformal lubricated contacts [Internet]. Tribology Transactions. 2019 ; 1-13.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1080/10402004.2019.1640917
Vancouver
Boidi G, Tertuliano I da S, Lima LG del B da S, Profito FJ, Machado IF. Porosity effect of sintered steel on the frictional performance of conformal and nonconformal lubricated contacts [Internet]. Tribology Transactions. 2019 ; 1-13.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1080/10402004.2019.1640917
Artigo de periodico
Effect of waviness and roughness on cylinder liner friction (2018)
Tomanik, Antonio Eduardo Meirelles; Profito, Francisco José ; Mansori, Mohamed El; Souza, Roberto Martins de ; Profito, Francisco José
Fonte: Tribology Letters. Unidade: EP
Assuntos: ATRITO, TRIBOLOGIA, TOPOGRAFIA, FRICÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOMANIK, Antonio Eduardo Meirelles et al. Effect of waviness and roughness on cylinder liner friction. Tribology Letters, v. 120, p. 547-555, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2018.01.012. Acesso em: 27 nov. 2025.
APA
Tomanik, A. E. M., Profito, F. J., Mansori, M. E., Souza, R. M. de, & Profito, F. J. (2018). Effect of waviness and roughness on cylinder liner friction. Tribology Letters, 120, 547-555. doi:10.1016/j.triboint.2018.01.012
NLM
Tomanik AEM, Profito FJ, Mansori ME, Souza RM de, Profito FJ. Effect of waviness and roughness on cylinder liner friction [Internet]. Tribology Letters. 2018 ; 120 547-555.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2018.01.012
Vancouver
Tomanik AEM, Profito FJ, Mansori ME, Souza RM de, Profito FJ. Effect of waviness and roughness on cylinder liner friction [Internet]. Tribology Letters. 2018 ; 120 547-555.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2018.01.012
Trabalho de evento
Effect of helical tooth geometry on gear efficiency using numerical analyses in lubricated contact (2018)
Lima, Arnaldo Oliveira; Fukumasu, Newton Kiyoshi ; Profito, Francisco José ; Souza, Roberto Martins de ; Machado, Izabel Fernanda
Nome do evento: Congresso e Exposição Internacionais de Tecnologia da Mobilidade. Unidade: EP
Assuntos: ENGRENAGENS, ANÁLISE NUMÉRICA, LUBRIFICAÇÃO, RUGOSIDADE SUPERFICIAL, ATRITO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIMA, Arnaldo Oliveira et al. Effect of helical tooth geometry on gear efficiency using numerical analyses in lubricated contact. 2018, Anais.. São Paulo: SAE Brasil, 2018. Disponível em: https://doi.org/10.4271/2018-36-0196. Acesso em: 27 nov. 2025.
APA
Lima, A. O., Fukumasu, N. K., Profito, F. J., Souza, R. M. de, & Machado, I. F. (2018). Effect of helical tooth geometry on gear efficiency using numerical analyses in lubricated contact. In . São Paulo: SAE Brasil. doi:10.4271/2018-36-0196
NLM
Lima AO, Fukumasu NK, Profito FJ, Souza RM de, Machado IF. Effect of helical tooth geometry on gear efficiency using numerical analyses in lubricated contact [Internet]. 2018 ;[citado 2025 nov. 27 ] Available from: https://doi.org/10.4271/2018-36-0196
Vancouver
Lima AO, Fukumasu NK, Profito FJ, Souza RM de, Machado IF. Effect of helical tooth geometry on gear efficiency using numerical analyses in lubricated contact [Internet]. 2018 ;[citado 2025 nov. 27 ] Available from: https://doi.org/10.4271/2018-36-0196
Artigo de periodico
Transient experimental and modelling studies of laser-textured microgrooved surfaces with a focus on piston-ring cylinder liner contacts (2017)
Profito, Francisco José ; Vlãdescu, Sorin-Cristian; Reddyhoff, Tom; Dini, Daniele
Fonte: Tribology International. Unidade: EP
Assuntos: DESGASTE, PISTÕES, LUBRIFICAÇÃO, TRATAMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROFITO, Francisco José et al. Transient experimental and modelling studies of laser-textured microgrooved surfaces with a focus on piston-ring cylinder liner contacts. Tribology International, v. 113, p. 125-136, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2016.12.003. Acesso em: 27 nov. 2025.
APA
Profito, F. J., Vlãdescu, S. -C., Reddyhoff, T., & Dini, D. (2017). Transient experimental and modelling studies of laser-textured microgrooved surfaces with a focus on piston-ring cylinder liner contacts. Tribology International, 113, 125-136. doi:10.1016/j.triboint.2016.12.003
NLM
Profito FJ, Vlãdescu S-C, Reddyhoff T, Dini D. Transient experimental and modelling studies of laser-textured microgrooved surfaces with a focus on piston-ring cylinder liner contacts [Internet]. Tribology International. 2017 ; 113 125-136.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2016.12.003
Vancouver
Profito FJ, Vlãdescu S-C, Reddyhoff T, Dini D. Transient experimental and modelling studies of laser-textured microgrooved surfaces with a focus on piston-ring cylinder liner contacts [Internet]. Tribology International. 2017 ; 113 125-136.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2016.12.003
Artigo de periodico
Influence of measurement and filtering type on friction predictions between cylinder liner and oil control ring (2016)
Dimkovski, Z; Tomanik, Eduardo Augusto; Profito, Francisco José
Fonte: Tribology International. Unidade: EP
Assuntos: FILTRAÇÃO, ATRITO, FRICÇÃO, TRATAMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIMKOVSKI, Z e TOMANIK, Eduardo Augusto e PROFITO, Francisco José. Influence of measurement and filtering type on friction predictions between cylinder liner and oil control ring. Tribology International, v. 100, p. 7-17, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2015.10.014. Acesso em: 27 nov. 2025.
APA
Dimkovski, Z., Tomanik, E. A., & Profito, F. J. (2016). Influence of measurement and filtering type on friction predictions between cylinder liner and oil control ring. Tribology International, 100, 7-17. doi:10.1016/j.triboint.2015.10.014
NLM
Dimkovski Z, Tomanik EA, Profito FJ. Influence of measurement and filtering type on friction predictions between cylinder liner and oil control ring [Internet]. Tribology International. 2016 ; 100 7-17.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2015.10.014
Vancouver
Dimkovski Z, Tomanik EA, Profito FJ. Influence of measurement and filtering type on friction predictions between cylinder liner and oil control ring [Internet]. Tribology International. 2016 ; 100 7-17.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2015.10.014
Artigo de periodico
Effect of cylinder liner wear on the mixed lubrication regime of TLOCRs (2016)
Profito, Francisco José ; Tomanik, Eduardo Augusto; Zachariadis, Demétrio Cornilios
Fonte: Tribology International. Unidade: EP
Assuntos: LUBRIFICAÇÃO, MOTORES DE COMBUSTÃO INTERNA, TOPOGRAFIA, CISALHAMENTO, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROFITO, Francisco José e TOMANIK, Eduardo Augusto e ZACHARIADIS, Demétrio Cornilios. Effect of cylinder liner wear on the mixed lubrication regime of TLOCRs. Tribology International, v. 93, n. Ja 2016, p. 723-732, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2015.01.004. Acesso em: 27 nov. 2025.
APA
Profito, F. J., Tomanik, E. A., & Zachariadis, D. C. (2016). Effect of cylinder liner wear on the mixed lubrication regime of TLOCRs. Tribology International, 93( Ja 2016), 723-732. doi:10.1016/j.triboint.2015.01.004
NLM
Profito FJ, Tomanik EA, Zachariadis DC. Effect of cylinder liner wear on the mixed lubrication regime of TLOCRs [Internet]. Tribology International. 2016 ; 93( Ja 2016): 723-732.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2015.01.004
Vancouver
Profito FJ, Tomanik EA, Zachariadis DC. Effect of cylinder liner wear on the mixed lubrication regime of TLOCRs [Internet]. Tribology International. 2016 ; 93( Ja 2016): 723-732.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2015.01.004
Tese (Doutorado)
On the development of advanced techniques for mixed-elastohydrodynamic lubrification modelling of journal and sliding bearing systems (2015)
Profito, Francisco José ; Zachariadis, Demétrio Cornilios (Orientador)
Unidade: EP
Assuntos: LUBRIFICAÇÃO, INTERAÇÃO FLUIDO-ESTRUTURA, MANCAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROFITO, Francisco José. On the development of advanced techniques for mixed-elastohydrodynamic lubrification modelling of journal and sliding bearing systems. 2015. Tese (Doutorado) – Universidade de São Paulo, São Paulo, 2015. Disponível em: http://www.teses.usp.br/teses/disponiveis/3/3152/tde-07072016-151613/. Acesso em: 27 nov. 2025.
APA
Profito, F. J. (2015). On the development of advanced techniques for mixed-elastohydrodynamic lubrification modelling of journal and sliding bearing systems (Tese (Doutorado). Universidade de São Paulo, São Paulo. Recuperado de http://www.teses.usp.br/teses/disponiveis/3/3152/tde-07072016-151613/
NLM
Profito FJ. On the development of advanced techniques for mixed-elastohydrodynamic lubrification modelling of journal and sliding bearing systems [Internet]. 2015 ;[citado 2025 nov. 27 ] Available from: http://www.teses.usp.br/teses/disponiveis/3/3152/tde-07072016-151613/
Vancouver
Profito FJ. On the development of advanced techniques for mixed-elastohydrodynamic lubrification modelling of journal and sliding bearing systems [Internet]. 2015 ;[citado 2025 nov. 27 ] Available from: http://www.teses.usp.br/teses/disponiveis/3/3152/tde-07072016-151613/
Artigo de periodico
A general finite volume method for the solution of the Reynolds lubrication equation with a mass-conserving cavitation model (2015)
Profito, Francisco José ; Giacopini, Matteo; Zachariadis, Demétrio Cornilios
Fonte: Tribology Letters. Unidade: EP
Assuntos: LUBRIFICAÇÃO, EQUAÇÕES DE REYNOLDS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROFITO, Francisco José e GIACOPINI, Matteo e ZACHARIADIS, Demétrio Cornilios. A general finite volume method for the solution of the Reynolds lubrication equation with a mass-conserving cavitation model. Tribology Letters, v. 60, n. 1, p. 1-21, 2015Tradução . . Disponível em: https://doi.org/10.1007/s11249-015-0588-0. Acesso em: 27 nov. 2025.
APA
Profito, F. J., Giacopini, M., & Zachariadis, D. C. (2015). A general finite volume method for the solution of the Reynolds lubrication equation with a mass-conserving cavitation model. Tribology Letters, 60( 1), 1-21. doi:10.1007/s11249-015-0588-0
NLM
Profito FJ, Giacopini M, Zachariadis DC. A general finite volume method for the solution of the Reynolds lubrication equation with a mass-conserving cavitation model [Internet]. Tribology Letters. 2015 ; 60( 1): 1-21.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s11249-015-0588-0
Vancouver
Profito FJ, Giacopini M, Zachariadis DC. A general finite volume method for the solution of the Reynolds lubrication equation with a mass-conserving cavitation model [Internet]. Tribology Letters. 2015 ; 60( 1): 1-21.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1007/s11249-015-0588-0
Artigo de periodico
Partitioned fluid-structure methods applied to the solution of elastohydrodynamic conformal contacts (2014)
Profito, Francisco José ; Zachariadis, Demétrio Cornilios
Fonte: Tribology International. Unidade: EP
Assuntos: LUBRIFICAÇÃO, ROLAMENTOS, INTERAÇÃO FLUIDO-ESTRUTURA, HIDRODINÂMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROFITO, Francisco José e ZACHARIADIS, Demétrio Cornilios. Partitioned fluid-structure methods applied to the solution of elastohydrodynamic conformal contacts. Tribology International, v. 81, n. Ja 2015, p. 321-332, 2014Tradução . . Disponível em: https://doi.org/10.1016/j.triboint.2014.09.007. Acesso em: 27 nov. 2025.
APA
Profito, F. J., & Zachariadis, D. C. (2014). Partitioned fluid-structure methods applied to the solution of elastohydrodynamic conformal contacts. Tribology International, 81( Ja 2015), 321-332. doi:10.1016/j.triboint.2014.09.007
NLM
Profito FJ, Zachariadis DC. Partitioned fluid-structure methods applied to the solution of elastohydrodynamic conformal contacts [Internet]. Tribology International. 2014 ; 81( Ja 2015): 321-332.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2014.09.007
Vancouver
Profito FJ, Zachariadis DC. Partitioned fluid-structure methods applied to the solution of elastohydrodynamic conformal contacts [Internet]. Tribology International. 2014 ; 81( Ja 2015): 321-332.[citado 2025 nov. 27 ] Available from: https://doi.org/10.1016/j.triboint.2014.09.007
Dissertação (Mestrado)
Modelagem unidimensional do regime misto de lubrificação aplicada a superfícies texturizadas (2010)
Profito, Francisco José ; Zachariadis, Demétrio Cornilios (Orientador)
Unidade: EP
Assuntos: TRIBOLOGIA, LUBRIFICAÇÃO, HIDRODINÂMICA, RUGOSIDADE SUPERFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PROFITO, Francisco José. Modelagem unidimensional do regime misto de lubrificação aplicada a superfícies texturizadas. 2010. Dissertação (Mestrado) – Universidade de São Paulo, São Paulo, 2010. Disponível em: http://www.teses.usp.br/teses/disponiveis/3/3152/tde-29112010-155407/. Acesso em: 27 nov. 2025.
APA
Profito, F. J. (2010). Modelagem unidimensional do regime misto de lubrificação aplicada a superfícies texturizadas (Dissertação (Mestrado). Universidade de São Paulo, São Paulo. Recuperado de http://www.teses.usp.br/teses/disponiveis/3/3152/tde-29112010-155407/
NLM
Profito FJ. Modelagem unidimensional do regime misto de lubrificação aplicada a superfícies texturizadas [Internet]. 2010 ;[citado 2025 nov. 27 ] Available from: http://www.teses.usp.br/teses/disponiveis/3/3152/tde-29112010-155407/
Vancouver
Profito FJ. Modelagem unidimensional do regime misto de lubrificação aplicada a superfícies texturizadas [Internet]. 2010 ;[citado 2025 nov. 27 ] Available from: http://www.teses.usp.br/teses/disponiveis/3/3152/tde-29112010-155407/

Unidades USP

ReP

Filtros

Autores

Autores USP

Ano de publicação

Assuntos

Título da fonte

País de publicação

Agência de fomento

Indexado em

Afiliação dos autores externos não normalizada

País das instituições de afiliação dos autores externos