ReP USP - Resultado da busca

Artigo de periodico
Kinetics Analysis of Steam Reforming of Methane on Sponge Iron (2022)
Ribeiro, Tiago Ramos; Ferreira Neto, João Batista; Poço, João Guilherme Rocha ; Takano, Cyro; Kolbeinsen, Leiv; Ringdalen, Eli
Source: ISIJ International. Unidade: EP
Subjects: REDUÇÃO, FERRO (METALURGIA), METANO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Tiago Ramos et al. Kinetics Analysis of Steam Reforming of Methane on Sponge Iron. ISIJ International, v. 62, n. 3, p. 504-514, 2022Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.ISIJINT-2021-472. Acesso em: 10 nov. 2024.
APA
Ribeiro, T. R., Ferreira Neto, J. B., Poço, J. G. R., Takano, C., Kolbeinsen, L., & Ringdalen, E. (2022). Kinetics Analysis of Steam Reforming of Methane on Sponge Iron. ISIJ International, 62( 3), 504-514. doi:10.2355/isijinternational.ISIJINT-2021-472
NLM
Ribeiro TR, Ferreira Neto JB, Poço JGR, Takano C, Kolbeinsen L, Ringdalen E. Kinetics Analysis of Steam Reforming of Methane on Sponge Iron [Internet]. ISIJ International. 2022 ; 62( 3): 504-514.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.ISIJINT-2021-472
Vancouver
Ribeiro TR, Ferreira Neto JB, Poço JGR, Takano C, Kolbeinsen L, Ringdalen E. Kinetics Analysis of Steam Reforming of Methane on Sponge Iron [Internet]. ISIJ International. 2022 ; 62( 3): 504-514.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.ISIJINT-2021-472
Artigo de periodico
Steam Reforming of Methane on Sponge Iron: Influence of Gas Composition on Reaction Rate (2021)
Ribeiro, Tiago Ramos; Ferreira Neto, João Batista; Poço, João Guilherme Rocha; Takano, Cyro; Kolbeinsen, Leiv; Ringdalen, Eli
Source: ISIJ International. Unidade: EP
Subjects: REDUÇÃO, FERRO (METALURGIA), METANO, AUTOMÓVEIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Tiago Ramos et al. Steam Reforming of Methane on Sponge Iron: Influence of Gas Composition on Reaction Rate. ISIJ International, v. 61, n. 1, p. 182-184, 2021Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.ISIJINT-2019-477. Acesso em: 10 nov. 2024.
APA
Ribeiro, T. R., Ferreira Neto, J. B., Poço, J. G. R., Takano, C., Kolbeinsen, L., & Ringdalen, E. (2021). Steam Reforming of Methane on Sponge Iron: Influence of Gas Composition on Reaction Rate. ISIJ International, 61( 1), 182-184. doi:10.2355/isijinternational.ISIJINT-2019-477
NLM
Ribeiro TR, Ferreira Neto JB, Poço JGR, Takano C, Kolbeinsen L, Ringdalen E. Steam Reforming of Methane on Sponge Iron: Influence of Gas Composition on Reaction Rate [Internet]. ISIJ International. 2021 ;61( 1): 182-184.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.ISIJINT-2019-477
Vancouver
Ribeiro TR, Ferreira Neto JB, Poço JGR, Takano C, Kolbeinsen L, Ringdalen E. Steam Reforming of Methane on Sponge Iron: Influence of Gas Composition on Reaction Rate [Internet]. ISIJ International. 2021 ;61( 1): 182-184.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.ISIJINT-2019-477
Artigo de periodico
Kinetics of Martensite Reversion to Austenite during Overaging in a Maraging 350 Steel (2019)
Carvalho, Leandro Gomes de ; Plaut, Ronald Lesley ; Lima, Nelson Batista de ; Padilha, Angelo Fernando
Source: ISIJ International. Unidades: EP, IPEN
Subjects: AÇO, MUDANÇA DE FASE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARVALHO, Leandro Gomes de et al. Kinetics of Martensite Reversion to Austenite during Overaging in a Maraging 350 Steel. ISIJ International, v. 59, n. 6, p. 1119-1127, 2019Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.ISIJINT-2018-610. Acesso em: 10 nov. 2024.
APA
Carvalho, L. G. de, Plaut, R. L., Lima, N. B. de, & Padilha, A. F. (2019). Kinetics of Martensite Reversion to Austenite during Overaging in a Maraging 350 Steel. ISIJ International, 59( 6), 1119-1127. doi:10.2355/isijinternational.ISIJINT-2018-610
NLM
Carvalho LG de, Plaut RL, Lima NB de, Padilha AF. Kinetics of Martensite Reversion to Austenite during Overaging in a Maraging 350 Steel [Internet]. ISIJ International. 2019 ; 59( 6): 1119-1127.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.ISIJINT-2018-610
Vancouver
Carvalho LG de, Plaut RL, Lima NB de, Padilha AF. Kinetics of Martensite Reversion to Austenite during Overaging in a Maraging 350 Steel [Internet]. ISIJ International. 2019 ; 59( 6): 1119-1127.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.ISIJINT-2018-610
Artigo de periodico
Thermodynamic Analysis of M 7 C 3 Carbide Dissolution during Plasma Nitriding of an AISI D2 Tool Steel (2017)
Garzon, Carlos Mario; Franco Júnior, Adonias Ribeiro; Tschiptschin, André Paulo
Source: ISIJ International. Unidade: EP
Subjects: MUDANÇA DE FASE, AÇO FERRAMENTA, DIAGRAMA DE TRANSFORMAÇÃO DE FASE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GARZON, Carlos Mario e FRANCO JÚNIOR, Adonias Ribeiro e TSCHIPTSCHIN, André Paulo. Thermodynamic Analysis of M 7 C 3 Carbide Dissolution during Plasma Nitriding of an AISI D2 Tool Steel. ISIJ International, v. 57, n. 4, p. 737-745, 2017Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.ISIJINT-2016-553. Acesso em: 10 nov. 2024.
APA
Garzon, C. M., Franco Júnior, A. R., & Tschiptschin, A. P. (2017). Thermodynamic Analysis of M 7 C 3 Carbide Dissolution during Plasma Nitriding of an AISI D2 Tool Steel. ISIJ International, 57( 4), 737-745. doi:10.2355/isijinternational.ISIJINT-2016-553
NLM
Garzon CM, Franco Júnior AR, Tschiptschin AP. Thermodynamic Analysis of M 7 C 3 Carbide Dissolution during Plasma Nitriding of an AISI D2 Tool Steel [Internet]. ISIJ International. 2017 ; 57( 4): 737-745.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.ISIJINT-2016-553
Vancouver
Garzon CM, Franco Júnior AR, Tschiptschin AP. Thermodynamic Analysis of M 7 C 3 Carbide Dissolution during Plasma Nitriding of an AISI D2 Tool Steel [Internet]. ISIJ International. 2017 ; 57( 4): 737-745.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.ISIJINT-2016-553
Artigo de periodico
Numerical simulation with thorough experimental validation to predict the build-up of residual stresses during quenching of carbon and low-alloy steels (2014)
Ariza Echeverri, Edwan Anderson ; Martorano, Marcelo de Aquino ; Lima, Nelson Batista de ; Tschiptschin, André Paulo
Source: ISIJ International. Unidade: EP
Subjects: AÇO, DIFRAÇÃO POR RAIOS X, TENSÃO RESIDUAL, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARIZA ECHEVERRI, Edwan Anderson et al. Numerical simulation with thorough experimental validation to predict the build-up of residual stresses during quenching of carbon and low-alloy steels. ISIJ International, v. 54, n. 6, p. 1396-1405, 2014Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.54.1396. Acesso em: 10 nov. 2024.
APA
Ariza Echeverri, E. A., Martorano, M. de A., Lima, N. B. de, & Tschiptschin, A. P. (2014). Numerical simulation with thorough experimental validation to predict the build-up of residual stresses during quenching of carbon and low-alloy steels. ISIJ International, 54( 6), 1396-1405. doi:10.2355/isijinternational.54.1396
NLM
Ariza Echeverri EA, Martorano M de A, Lima NB de, Tschiptschin AP. Numerical simulation with thorough experimental validation to predict the build-up of residual stresses during quenching of carbon and low-alloy steels [Internet]. ISIJ International. 2014 ; 54( 6): 1396-1405.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.54.1396
Vancouver
Ariza Echeverri EA, Martorano M de A, Lima NB de, Tschiptschin AP. Numerical simulation with thorough experimental validation to predict the build-up of residual stresses during quenching of carbon and low-alloy steels [Internet]. ISIJ International. 2014 ; 54( 6): 1396-1405.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.54.1396
Artigo de periodico
Predicting delta ferrite content in stainless steel castings (2012)
Martorano, Marcelo de Aquino ; Tavares, Caio Fazzioli; Padilha, Angelo Fernando
Source: ISIJ International. Unidade: EP
Subjects: MUDANÇA DE FASE, AÇO INOXIDÁVEL, FUNDIÇÃO DE NÃO FERROSOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTORANO, Marcelo de Aquino e TAVARES, Caio Fazzioli e PADILHA, Angelo Fernando. Predicting delta ferrite content in stainless steel castings. ISIJ International, v. 52, n. 6, p. 1054-1065, 2012Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.52.1054. Acesso em: 10 nov. 2024.
APA
Martorano, M. de A., Tavares, C. F., & Padilha, A. F. (2012). Predicting delta ferrite content in stainless steel castings. ISIJ International, 52( 6), 1054-1065. doi:10.2355/isijinternational.52.1054
NLM
Martorano M de A, Tavares CF, Padilha AF. Predicting delta ferrite content in stainless steel castings [Internet]. ISIJ International. 2012 ; 52( 6): 1054-1065.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.52.1054
Vancouver
Martorano M de A, Tavares CF, Padilha AF. Predicting delta ferrite content in stainless steel castings [Internet]. ISIJ International. 2012 ; 52( 6): 1054-1065.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.52.1054
Artigo de periodico
High carbon ferro-chromium production by self-reducing process: effects of Fe-Si and fluxing agent additions (2011)
Zambrano, Adolfo Pillihuaman; Takano, Cyro; Mourão, Marcelo Breda ; Tagusagawa, Solon Yasuhiko; Iguchi, Yoshiaki
Source: ISIJ International. Unidade: EP
Subjects: FERRO (METALURGIA), MINÉRIOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZAMBRANO, Adolfo Pillihuaman et al. High carbon ferro-chromium production by self-reducing process: effects of Fe-Si and fluxing agent additions. ISIJ International, v. 51, n. 8, p. 1296-1300, 2011Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.51.1296. Acesso em: 10 nov. 2024.
APA
Zambrano, A. P., Takano, C., Mourão, M. B., Tagusagawa, S. Y., & Iguchi, Y. (2011). High carbon ferro-chromium production by self-reducing process: effects of Fe-Si and fluxing agent additions. ISIJ International, 51( 8), 1296-1300. doi:10.2355/isijinternational.51.1296
NLM
Zambrano AP, Takano C, Mourão MB, Tagusagawa SY, Iguchi Y. High carbon ferro-chromium production by self-reducing process: effects of Fe-Si and fluxing agent additions [Internet]. ISIJ International. 2011 ; 51( 8): 1296-1300.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.51.1296
Vancouver
Zambrano AP, Takano C, Mourão MB, Tagusagawa SY, Iguchi Y. High carbon ferro-chromium production by self-reducing process: effects of Fe-Si and fluxing agent additions [Internet]. ISIJ International. 2011 ; 51( 8): 1296-1300.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.51.1296
Artigo de periodico
Reduction of chromium from Al2O3–CaO–SiO2–CrOX slags by carbon dissolved in liquid iron (2011)
Carboni, Marcelo Carboneri; Espinosa, Denise Crocce Romano ; Tenório, Jorge Alberto Soares
Source: ISIJ International. Unidade: EP
Subjects: TERMODINÂMICA, CROMO, ESCÓRIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARBONI, Marcelo Carboneri e ESPINOSA, Denise Crocce Romano e TENÓRIO, Jorge Alberto Soares. Reduction of chromium from Al2O3–CaO–SiO2–CrOX slags by carbon dissolved in liquid iron. ISIJ International, v. 51, n. 4, p. 523-529, 2011Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.51.523. Acesso em: 10 nov. 2024.
APA
Carboni, M. C., Espinosa, D. C. R., & Tenório, J. A. S. (2011). Reduction of chromium from Al2O3–CaO–SiO2–CrOX slags by carbon dissolved in liquid iron. ISIJ International, 51( 4), 523-529. doi:10.2355/isijinternational.51.523
NLM
Carboni MC, Espinosa DCR, Tenório JAS. Reduction of chromium from Al2O3–CaO–SiO2–CrOX slags by carbon dissolved in liquid iron [Internet]. ISIJ International. 2011 ;51( 4): 523-529.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.51.523
Vancouver
Carboni MC, Espinosa DCR, Tenório JAS. Reduction of chromium from Al2O3–CaO–SiO2–CrOX slags by carbon dissolved in liquid iron [Internet]. ISIJ International. 2011 ;51( 4): 523-529.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.51.523
Artigo de periodico
Chromites Reduction Reaction Mechanisms in Carbon–Chromites Composite Agglomerates at 1 773 K (2007)
Takano, Cyro; Zambrano, Adolfo Pillihuaman; Nogueira, Alberto Eloy Anduze; Mourão, Marcelo Breda ; Iguchi, Yoshiaki
Source: ISIJ International. Unidade: EP
Subjects: CROMO, FERRO (METALURGIA), COQUE DE PETRÓLEO, ESCÓRIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TAKANO, Cyro et al. Chromites Reduction Reaction Mechanisms in Carbon–Chromites Composite Agglomerates at 1 773 K. ISIJ International, v. 47, n. 11, p. 1585-1589, 2007Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.47.1585. Acesso em: 10 nov. 2024.
APA
Takano, C., Zambrano, A. P., Nogueira, A. E. A., Mourão, M. B., & Iguchi, Y. (2007). Chromites Reduction Reaction Mechanisms in Carbon–Chromites Composite Agglomerates at 1 773 K. ISIJ International, 47( 11), 1585-1589. doi:10.2355/isijinternational.47.1585
NLM
Takano C, Zambrano AP, Nogueira AEA, Mourão MB, Iguchi Y. Chromites Reduction Reaction Mechanisms in Carbon–Chromites Composite Agglomerates at 1 773 K [Internet]. ISIJ International. 2007 ;47( 11): 1585-1589.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.47.1585
Vancouver
Takano C, Zambrano AP, Nogueira AEA, Mourão MB, Iguchi Y. Chromites Reduction Reaction Mechanisms in Carbon–Chromites Composite Agglomerates at 1 773 K [Internet]. ISIJ International. 2007 ;47( 11): 1585-1589.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.47.1585
Artigo de periodico
Kinetics of the non-isothermal reduction of Nb2O5 with aluminium (2005)
De Lazzari, Claudio Parra; Cintho, Osvaldo Mitsuyuki ; Capocchi, José Deodoro Trani
Source: ISIJ International. Unidade: EP
Subjects: NIÓBIO, REDUÇÃO, ALUMÍNIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DE LAZZARI, Claudio Parra e CINTHO, Osvaldo Mitsuyuki e CAPOCCHI, José Deodoro Trani. Kinetics of the non-isothermal reduction of Nb2O5 with aluminium. ISIJ International, v. 45, n. 1, p. 19-22, 2005Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/708f3d1d-28b3-4a66-b1a8-ba824f2d39b0/CAPOCCHI-2005-1243668-Kineticsofthenon-isothermalreduction0001%20OK.pdf. Acesso em: 10 nov. 2024.
APA
De Lazzari, C. P., Cintho, O. M., & Capocchi, J. D. T. (2005). Kinetics of the non-isothermal reduction of Nb2O5 with aluminium. ISIJ International, 45( 1), 19-22. Recuperado de https://repositorio.usp.br/directbitstream/708f3d1d-28b3-4a66-b1a8-ba824f2d39b0/CAPOCCHI-2005-1243668-Kineticsofthenon-isothermalreduction0001%20OK.pdf
NLM
De Lazzari CP, Cintho OM, Capocchi JDT. Kinetics of the non-isothermal reduction of Nb2O5 with aluminium [Internet]. ISIJ International. 2005 ; 45( 1): 19-22.[citado 2024 nov. 10 ] Available from: https://repositorio.usp.br/directbitstream/708f3d1d-28b3-4a66-b1a8-ba824f2d39b0/CAPOCCHI-2005-1243668-Kineticsofthenon-isothermalreduction0001%20OK.pdf
Vancouver
De Lazzari CP, Cintho OM, Capocchi JDT. Kinetics of the non-isothermal reduction of Nb2O5 with aluminium [Internet]. ISIJ International. 2005 ; 45( 1): 19-22.[citado 2024 nov. 10 ] Available from: https://repositorio.usp.br/directbitstream/708f3d1d-28b3-4a66-b1a8-ba824f2d39b0/CAPOCCHI-2005-1243668-Kineticsofthenon-isothermalreduction0001%20OK.pdf
Artigo de periodico
Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part I: Deformed state (2004)
Hupalo, Marcio Ferreira ; Padilha, Angelo Fernando ; Sandim, Hugo Ricardo Zschommler ; Kliauga, Andrea Madeira
Source: ISIJ International. Unidade: EP
Subjects: TEXTURA, LIGAS METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HUPALO, Marcio Ferreira et al. Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part I: Deformed state. ISIJ International, v. 44, n. 11, p. 1894-1901, 2004Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.44.1894. Acesso em: 10 nov. 2024.
APA
Hupalo, M. F., Padilha, A. F., Sandim, H. R. Z., & Kliauga, A. M. (2004). Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part I: Deformed state. ISIJ International, 44( 11), 1894-1901. doi:10.2355/isijinternational.44.1894
NLM
Hupalo MF, Padilha AF, Sandim HRZ, Kliauga AM. Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part I: Deformed state [Internet]. ISIJ International. 2004 ; 44( 11): 1894-1901.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.44.1894
Vancouver
Hupalo MF, Padilha AF, Sandim HRZ, Kliauga AM. Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part I: Deformed state [Internet]. ISIJ International. 2004 ; 44( 11): 1894-1901.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.44.1894
Artigo de periodico
Texture evolution during the processing of electrical steels with 0,5% and 1,25% Si (2004)
Campos, Marcos Flávio de; Landgraf, Fernando José Gomes ; Falleiros, Ivan Gilberto Sandoval; Fronzaglia, Gabriela Campos; Kahn, Henrique
Source: ISIJ International. Unidade: EP
Subjects: TEXTURA, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS, Marcos Flávio de et al. Texture evolution during the processing of electrical steels with 0,5% and 1,25% Si. ISIJ International, v. 44, n. 10, p. 1733-1737, 2004Tradução . . Acesso em: 10 nov. 2024.
APA
Campos, M. F. de, Landgraf, F. J. G., Falleiros, I. G. S., Fronzaglia, G. C., & Kahn, H. (2004). Texture evolution during the processing of electrical steels with 0,5% and 1,25% Si. ISIJ International, 44( 10), 1733-1737.
NLM
Campos MF de, Landgraf FJG, Falleiros IGS, Fronzaglia GC, Kahn H. Texture evolution during the processing of electrical steels with 0,5% and 1,25% Si. ISIJ International. 2004 ; 44( 10): 1733-1737.[citado 2024 nov. 10 ]
Vancouver
Campos MF de, Landgraf FJG, Falleiros IGS, Fronzaglia GC, Kahn H. Texture evolution during the processing of electrical steels with 0,5% and 1,25% Si. ISIJ International. 2004 ; 44( 10): 1733-1737.[citado 2024 nov. 10 ]
Artigo de periodico
Effect of the hot band grain size and intermediate annealing on the deformation and recrystallization textures in low silicon electrical steels (2004)
Campos, Marcos Flávio de; Landgraf, Fernando José Gomes ; Takanohashi, Rubens; Chagas, Fábio Cardoso; Falleiros, Ivan Gilberto Sandoval; Fronzaglia, Gabriela Campos; Kahn, Henrique
Source: ISIJ International. Unidade: EP
Subjects: TEXTURA, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS, Marcos Flávio de et al. Effect of the hot band grain size and intermediate annealing on the deformation and recrystallization textures in low silicon electrical steels. ISIJ International, v. 44, n. 3, p. 591-597, 2004Tradução . . Acesso em: 10 nov. 2024.
APA
Campos, M. F. de, Landgraf, F. J. G., Takanohashi, R., Chagas, F. C., Falleiros, I. G. S., Fronzaglia, G. C., & Kahn, H. (2004). Effect of the hot band grain size and intermediate annealing on the deformation and recrystallization textures in low silicon electrical steels. ISIJ International, 44( 3), 591-597.
NLM
Campos MF de, Landgraf FJG, Takanohashi R, Chagas FC, Falleiros IGS, Fronzaglia GC, Kahn H. Effect of the hot band grain size and intermediate annealing on the deformation and recrystallization textures in low silicon electrical steels. ISIJ International. 2004 ; 44( 3): 591-597.[citado 2024 nov. 10 ]
Vancouver
Campos MF de, Landgraf FJG, Takanohashi R, Chagas FC, Falleiros IGS, Fronzaglia GC, Kahn H. Effect of the hot band grain size and intermediate annealing on the deformation and recrystallization textures in low silicon electrical steels. ISIJ International. 2004 ; 44( 3): 591-597.[citado 2024 nov. 10 ]
Artigo de periodico
Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part II:Annealed State (2004)
Hupalo, Marcio Ferreira ; Padilha, Angelo Fernando ; Sandim, Hugo Ricardo Zschommler ; Kliauga, Andrea Madeira
Source: ISIJ International. Unidade: EP
Subjects: METALURGIA FÍSICA, TEXTURA, LIGAS METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HUPALO, Marcio Ferreira et al. Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part II:Annealed State. ISIJ International, v. 44, n. 11, p. 1902-1910, 2004Tradução . . Acesso em: 10 nov. 2024.
APA
Hupalo, M. F., Padilha, A. F., Sandim, H. R. Z., & Kliauga, A. M. (2004). Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part II:Annealed State. ISIJ International, 44( 11), 1902-1910.
NLM
Hupalo MF, Padilha AF, Sandim HRZ, Kliauga AM. Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part II:Annealed State. ISIJ International. 2004 ;44( 11): 1902-1910.[citado 2024 nov. 10 ]
Vancouver
Hupalo MF, Padilha AF, Sandim HRZ, Kliauga AM. Cold swaging recovery and recrystallization of oligocrystalline INCOLOY MA 956. Part II:Annealed State. ISIJ International. 2004 ;44( 11): 1902-1910.[citado 2024 nov. 10 ]
Artigo de periodico
Annealing of cold-worked austenitic stainless steels (2003)
Padilha, Angelo Fernando ; Plaut, Ronald Lesley ; Rios, Paulo Rangel
Source: ISIJ International. Unidade: EP
Subjects: AÇO INOXIDÁVEL AUSTENÍTICO, TEXTURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PADILHA, Angelo Fernando e PLAUT, Ronald Lesley e RIOS, Paulo Rangel. Annealing of cold-worked austenitic stainless steels. ISIJ International, v. 43, n. 2, p. 135-143, 2003Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.43.135. Acesso em: 10 nov. 2024.
APA
Padilha, A. F., Plaut, R. L., & Rios, P. R. (2003). Annealing of cold-worked austenitic stainless steels. ISIJ International, 43( 2), 135-143. doi:10.2355/isijinternational.43.135
NLM
Padilha AF, Plaut RL, Rios PR. Annealing of cold-worked austenitic stainless steels [Internet]. ISIJ International. 2003 ;43( 2): 135-143.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.43.135
Vancouver
Padilha AF, Plaut RL, Rios PR. Annealing of cold-worked austenitic stainless steels [Internet]. ISIJ International. 2003 ;43( 2): 135-143.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.43.135
Artigo de periodico
Separation of static recrystallization and reverse transformation of deformation-induced martensite in a austenitic stainless steel by calorimetric.measurements (2003)
Haessner, Frank; Plaut, Ronald Lesley ; Padilha, Angelo Fernando
Source: ISIJ International. Unidade: EP
Subjects: AÇO INOXIDÁVEL AUSTENÍTICO, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HAESSNER, Frank e PLAUT, Ronald Lesley e PADILHA, Angelo Fernando. Separation of static recrystallization and reverse transformation of deformation-induced martensite in a austenitic stainless steel by calorimetric.measurements. ISIJ International, v. 43, n. 9, p. 1472-1474, 2003Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/07938357-5508-491a-9d3e-b29bdd859dfc/PLAUT-2003-1326062-Separationofstatic%20ok.pdf. Acesso em: 10 nov. 2024.
APA
Haessner, F., Plaut, R. L., & Padilha, A. F. (2003). Separation of static recrystallization and reverse transformation of deformation-induced martensite in a austenitic stainless steel by calorimetric.measurements. ISIJ International, 43( 9), 1472-1474. Recuperado de https://repositorio.usp.br/directbitstream/07938357-5508-491a-9d3e-b29bdd859dfc/PLAUT-2003-1326062-Separationofstatic%20ok.pdf
NLM
Haessner F, Plaut RL, Padilha AF. Separation of static recrystallization and reverse transformation of deformation-induced martensite in a austenitic stainless steel by calorimetric.measurements [Internet]. ISIJ International. 2003 ;43( 9): 1472-1474.[citado 2024 nov. 10 ] Available from: https://repositorio.usp.br/directbitstream/07938357-5508-491a-9d3e-b29bdd859dfc/PLAUT-2003-1326062-Separationofstatic%20ok.pdf
Vancouver
Haessner F, Plaut RL, Padilha AF. Separation of static recrystallization and reverse transformation of deformation-induced martensite in a austenitic stainless steel by calorimetric.measurements [Internet]. ISIJ International. 2003 ;43( 9): 1472-1474.[citado 2024 nov. 10 ] Available from: https://repositorio.usp.br/directbitstream/07938357-5508-491a-9d3e-b29bdd859dfc/PLAUT-2003-1326062-Separationofstatic%20ok.pdf
Artigo de periodico
Decomposition of austenite in austenitic stainless steels (2002)
Padilha, Angelo Fernando ; Rios, Paulo Rangel
Source: ISIJ International. Unidade: EP
Subjects: AÇO INOXIDÁVEL, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PADILHA, Angelo Fernando e RIOS, Paulo Rangel. Decomposition of austenite in austenitic stainless steels. ISIJ International, v. 42, n. 4, p. 325-337, 2002Tradução . . Disponível em: https://doi.org/10.2355/isijinternational.42.325. Acesso em: 10 nov. 2024.
APA
Padilha, A. F., & Rios, P. R. (2002). Decomposition of austenite in austenitic stainless steels. ISIJ International, 42( 4), 325-337. doi:10.2355/isijinternational.42.325
NLM
Padilha AF, Rios PR. Decomposition of austenite in austenitic stainless steels [Internet]. ISIJ International. 2002 ;42( 4): 325-337.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.42.325
Vancouver
Padilha AF, Rios PR. Decomposition of austenite in austenitic stainless steels [Internet]. ISIJ International. 2002 ;42( 4): 325-337.[citado 2024 nov. 10 ] Available from: https://doi.org/10.2355/isijinternational.42.325
Artigo de periodico
Carbothermic reduction by microwave heating (2001)
Mourão, Marcelo Breda ; Carvalho Junior, Ivan Parreiras de; Takano, Cyro
Source: ISIJ International. Unidade: EP
Subjects: TECNOLOGIA DE MICRO-ONDAS, METALURGIA EXTRATIVA FERROSA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOURÃO, Marcelo Breda e CARVALHO JUNIOR, Ivan Parreiras de e TAKANO, Cyro. Carbothermic reduction by microwave heating. ISIJ International, v. 41, p. supl. s27-s30, 2001Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/44878ba9-056f-4dbb-a3d5-6c5244e6a0d1/MOUR%C3%83O-2001-1209420-Carbothermicreductionby%20OK.pdf. Acesso em: 10 nov. 2024.
APA
Mourão, M. B., Carvalho Junior, I. P. de, & Takano, C. (2001). Carbothermic reduction by microwave heating. ISIJ International, 41, supl. s27-s30. Recuperado de https://repositorio.usp.br/directbitstream/44878ba9-056f-4dbb-a3d5-6c5244e6a0d1/MOUR%C3%83O-2001-1209420-Carbothermicreductionby%20OK.pdf
NLM
Mourão MB, Carvalho Junior IP de, Takano C. Carbothermic reduction by microwave heating [Internet]. ISIJ International. 2001 ; 41 supl. s27-s30.[citado 2024 nov. 10 ] Available from: https://repositorio.usp.br/directbitstream/44878ba9-056f-4dbb-a3d5-6c5244e6a0d1/MOUR%C3%83O-2001-1209420-Carbothermicreductionby%20OK.pdf
Vancouver
Mourão MB, Carvalho Junior IP de, Takano C. Carbothermic reduction by microwave heating [Internet]. ISIJ International. 2001 ; 41 supl. s27-s30.[citado 2024 nov. 10 ] Available from: https://repositorio.usp.br/directbitstream/44878ba9-056f-4dbb-a3d5-6c5244e6a0d1/MOUR%C3%83O-2001-1209420-Carbothermicreductionby%20OK.pdf
Artigo de periodico
Comparison of high temperature behavior of self-reducing pellets produced from iron ore with that of dust from sintering plant (2001)
Takano, Cyro; Mourão, Marcelo Breda
Source: ISIJ International. Unidade: EP
Subjects: PIROMETALURGIA, ENGENHARIA METALÚRGICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TAKANO, Cyro e MOURÃO, Marcelo Breda. Comparison of high temperature behavior of self-reducing pellets produced from iron ore with that of dust from sintering plant. ISIJ International, v. 41, p. s22-s26, 2001Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/c6563e15-8303-4487-8177-ae1718f728f8/MOUR%C3%83O-2001-1205061-Comparisonofhightemperature%20OK.pdf. Acesso em: 10 nov. 2024.
APA
Takano, C., & Mourão, M. B. (2001). Comparison of high temperature behavior of self-reducing pellets produced from iron ore with that of dust from sintering plant. ISIJ International, 41, s22-s26. Recuperado de https://repositorio.usp.br/directbitstream/c6563e15-8303-4487-8177-ae1718f728f8/MOUR%C3%83O-2001-1205061-Comparisonofhightemperature%20OK.pdf
NLM
Takano C, Mourão MB. Comparison of high temperature behavior of self-reducing pellets produced from iron ore with that of dust from sintering plant [Internet]. ISIJ International. 2001 ; 41 s22-s26.[citado 2024 nov. 10 ] Available from: https://repositorio.usp.br/directbitstream/c6563e15-8303-4487-8177-ae1718f728f8/MOUR%C3%83O-2001-1205061-Comparisonofhightemperature%20OK.pdf
Vancouver
Takano C, Mourão MB. Comparison of high temperature behavior of self-reducing pellets produced from iron ore with that of dust from sintering plant [Internet]. ISIJ International. 2001 ; 41 s22-s26.[citado 2024 nov. 10 ] Available from: https://repositorio.usp.br/directbitstream/c6563e15-8303-4487-8177-ae1718f728f8/MOUR%C3%83O-2001-1205061-Comparisonofhightemperature%20OK.pdf
Artigo de periodico
The strength and the high temperature behaviors of self-reducing pellets containing EAF dust (2000)
Mantovani, Mario Cesar; Takano, Cyro
Source: ISIJ International. Unidade: EP
Assunto: PIROMETALURGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MANTOVANI, Mario Cesar e TAKANO, Cyro. The strength and the high temperature behaviors of self-reducing pellets containing EAF dust. ISIJ International, v. 40, n. 3, 2000Tradução . . Acesso em: 10 nov. 2024.
APA
Mantovani, M. C., & Takano, C. (2000). The strength and the high temperature behaviors of self-reducing pellets containing EAF dust. ISIJ International, 40( 3).
NLM
Mantovani MC, Takano C. The strength and the high temperature behaviors of self-reducing pellets containing EAF dust. ISIJ International. 2000 ; 40( 3):[citado 2024 nov. 10 ]
Vancouver
Mantovani MC, Takano C. The strength and the high temperature behaviors of self-reducing pellets containing EAF dust. ISIJ International. 2000 ; 40( 3):[citado 2024 nov. 10 ]

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Indexado em

Non normalized affiliation