ReP USP - Resultado da busca

Artigo de periodico
Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties (2024)
Bon, Douglas Geovanni; Cavalcanti, Thiago; Thiesen, Anselmo; Santos, Henrique; Gutjhar, Jhonattan; Cintho, Osvaldo Mitsuyuki ; Coelho, Reginaldo Teixeira ; Oliveira, Marcelo Falcão de ; Ribamar, Giovani Gonçalves; Avila, Julian Arnaldo
Source: International Journal of Advanced Manufacturing Technology. Unidades: EESC, EP
Subjects: MANUFATURA ADITIVA, LASER, CALOR, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BON, Douglas Geovanni et al. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties. International Journal of Advanced Manufacturing Technology, v. 130, n. 9-10, p. 4919-4931, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-024-12967-4. Acesso em: 11 set. 2024.
APA
Bon, D. G., Cavalcanti, T., Thiesen, A., Santos, H., Gutjhar, J., Cintho, O. M., et al. (2024). Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties. International Journal of Advanced Manufacturing Technology, 130( 9-10), 4919-4931. doi:10.1007/s00170-024-12967-4
NLM
Bon DG, Cavalcanti T, Thiesen A, Santos H, Gutjhar J, Cintho OM, Coelho RT, Oliveira MF de, Ribamar GG, Avila JA. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130( 9-10): 4919-4931.[citado 2024 set. 11 ] Available from: http://dx.doi.org/10.1007/s00170-024-12967-4
Vancouver
Bon DG, Cavalcanti T, Thiesen A, Santos H, Gutjhar J, Cintho OM, Coelho RT, Oliveira MF de, Ribamar GG, Avila JA. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130( 9-10): 4919-4931.[citado 2024 set. 11 ] Available from: http://dx.doi.org/10.1007/s00170-024-12967-4
Artigo de periodico
A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer (2024)
Zoppellari, Alexandre Bertho; Coelho, Reginaldo Teixeira
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assunto: ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZOPPELLARI, Alexandre Bertho e COELHO, Reginaldo Teixeira. A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer. International Journal of Advanced Manufacturing Technology, v. 130, p. 2635-2647, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-023-12810-2. Acesso em: 11 set. 2024.
APA
Zoppellari, A. B., & Coelho, R. T. (2024). A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer. International Journal of Advanced Manufacturing Technology, 130, 2635-2647. doi:10.1007/s00170-023-12810-2
NLM
Zoppellari AB, Coelho RT. A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130 2635-2647.[citado 2024 set. 11 ] Available from: http://dx.doi.org/10.1007/s00170-023-12810-2
Vancouver
Zoppellari AB, Coelho RT. A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130 2635-2647.[citado 2024 set. 11 ] Available from: http://dx.doi.org/10.1007/s00170-023-12810-2
Artigo de periodico
A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition (2023)
Ribeiro, Kandice Suane Barros ; Nuñez, Henrique Hiram Libutti; Venter, Giuliana Sardi ; Doude, Haley R ; Coelho, Reginaldo Teixeira
Source: International Journal of Advanced Manufacturing Technology. Unidades: EESC, ICMC
Subjects: MANUFATURA ADITIVA, PROCESSAMENTO DE IMAGENS, REDES NEURAIS, APRENDIZADO COMPUTACIONAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros et al. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition. International Journal of Advanced Manufacturing Technology, v. 127, n. 7-8, p. 3183-3194, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11582-z. Acesso em: 11 set. 2024.
APA
Ribeiro, K. S. B., Nuñez, H. H. L., Venter, G. S., Doude, H. R., & Coelho, R. T. (2023). A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition. International Journal of Advanced Manufacturing Technology, 127( 7-8), 3183-3194. doi:10.1007/s00170-023-11582-z
NLM
Ribeiro KSB, Nuñez HHL, Venter GS, Doude HR, Coelho RT. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 127( 7-8): 3183-3194.[citado 2024 set. 11 ] Available from: https://doi.org/10.1007/s00170-023-11582-z
Vancouver
Ribeiro KSB, Nuñez HHL, Venter GS, Doude HR, Coelho RT. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 127( 7-8): 3183-3194.[citado 2024 set. 11 ] Available from: https://doi.org/10.1007/s00170-023-11582-z
Artigo de periodico
Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel (2023)
Oliveira, Adriel P.; Figueira, Gustavo; Coelho, Reginaldo Teixeira ; Bolfarini, Claudemiro; Gargarella, Piter
Source: Materials Research. Unidade: EESC
Subjects: LASER, AÇO FERRAMENTA, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Adriel P. et al. Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel. Materials Research, v. 26, p. 1-9, 2023Tradução . . Disponível em: http://dx.doi.org/10.1590/1980-5373-MR-2023-0250. Acesso em: 11 set. 2024.
APA
Oliveira, A. P., Figueira, G., Coelho, R. T., Bolfarini, C., & Gargarella, P. (2023). Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel. Materials Research, 26, 1-9. doi:10.1590/1980-5373-MR-2023-0250
NLM
Oliveira AP, Figueira G, Coelho RT, Bolfarini C, Gargarella P. Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel [Internet]. Materials Research. 2023 ; 26 1-9.[citado 2024 set. 11 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0250
Vancouver
Oliveira AP, Figueira G, Coelho RT, Bolfarini C, Gargarella P. Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel [Internet]. Materials Research. 2023 ; 26 1-9.[citado 2024 set. 11 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0250
Artigo de periodico
Hardness and wear characteristics of laser-clad WC-17Co coatings on AISI H13 and AISI 4140 steel (2023)
Mariani, Fábio Edson; Figueiredo, Gabriel Viana; Barragán de Los Rios, Germán Alberto; Casteletti, Luiz Carlos ; Coelho, Reginaldo Teixeira
Source: Iranian Journal of Materials Science and Engineering. Unidade: EESC
Subjects: AÇO, REVESTIMENTOS, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Hardness and wear characteristics of laser-clad WC-17Co coatings on AISI H13 and AISI 4140 steel. Iranian Journal of Materials Science and Engineering, v. 20, n. 3, p. 1-15, 2023Tradução . . Disponível em: https://dx.doi.org/10.22068/ijmse.3206. Acesso em: 11 set. 2024.
APA
Mariani, F. E., Figueiredo, G. V., Barragán de Los Rios, G. A., Casteletti, L. C., & Coelho, R. T. (2023). Hardness and wear characteristics of laser-clad WC-17Co coatings on AISI H13 and AISI 4140 steel. Iranian Journal of Materials Science and Engineering, 20( 3), 1-15. doi:10.22068/ijmse.3206
NLM
Mariani FE, Figueiredo GV, Barragán de Los Rios GA, Casteletti LC, Coelho RT. Hardness and wear characteristics of laser-clad WC-17Co coatings on AISI H13 and AISI 4140 steel [Internet]. Iranian Journal of Materials Science and Engineering. 2023 ; 20( 3): 1-15.[citado 2024 set. 11 ] Available from: https://dx.doi.org/10.22068/ijmse.3206
Vancouver
Mariani FE, Figueiredo GV, Barragán de Los Rios GA, Casteletti LC, Coelho RT. Hardness and wear characteristics of laser-clad WC-17Co coatings on AISI H13 and AISI 4140 steel [Internet]. Iranian Journal of Materials Science and Engineering. 2023 ; 20( 3): 1-15.[citado 2024 set. 11 ] Available from: https://dx.doi.org/10.22068/ijmse.3206
Trabalho de evento
Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants (2023)
Assis, Cleiton Lazaro Fazolo de; Mecelis, Guilherme Rosati; Silva, Eraldo Jannone da ; Rodrigues, Alessandro Roger ; Coelho, Reginaldo Teixeira
Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC
Subjects: AÇO BAIXO CARBONO, USINAGEM, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSIS, Cleiton Lazaro Fazolo de et al. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants. 2023, Anais.. Cranfield, United Kingdom: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf. Acesso em: 11 set. 2024.
APA
Assis, C. L. F. de, Mecelis, G. R., Silva, E. J. da, Rodrigues, A. R., & Coelho, R. T. (2023). Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants. In Proceedings. Cranfield, United Kingdom: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf
NLM
Assis CLF de, Mecelis GR, Silva EJ da, Rodrigues AR, Coelho RT. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants [Internet]. Proceedings. 2023 ;[citado 2024 set. 11 ] Available from: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf
Vancouver
Assis CLF de, Mecelis GR, Silva EJ da, Rodrigues AR, Coelho RT. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants [Internet]. Proceedings. 2023 ;[citado 2024 set. 11 ] Available from: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf
Trabalho de evento-resumo
Caracterização da poça de fusão do processo de deposição por energia direcionada (DED) através de processamento de imagens (2021)
Libutti Nuñez, Henrique Hiram; Ribeiro, Kandice Suane Barros ; Coelho, Reginaldo Teixeira
Source: Livro de Resumos Expandidos. Conference titles: Simpósio Internacional de Iniciação Científica e Tecnológica da Universidade de São Paulo - SIICUSP. Unidade: EESC
Subjects: PROCESSAMENTO DE IMAGENS, IMPRESSÃO, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIBUTTI NUÑEZ, Henrique Hiram e RIBEIRO, Kandice Suane Barros e COELHO, Reginaldo Teixeira. Caracterização da poça de fusão do processo de deposição por energia direcionada (DED) através de processamento de imagens. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: http://soac.eesc.usp.br/index.php/siicusp/29siicusp/paper/viewFile/3370/2170. Acesso em: 11 set. 2024.
APA
Libutti Nuñez, H. H., Ribeiro, K. S. B., & Coelho, R. T. (2021). Caracterização da poça de fusão do processo de deposição por energia direcionada (DED) através de processamento de imagens. In Livro de Resumos Expandidos. São Carlos, SP: EESC/USP. Recuperado de http://soac.eesc.usp.br/index.php/siicusp/29siicusp/paper/viewFile/3370/2170
NLM
Libutti Nuñez HH, Ribeiro KSB, Coelho RT. Caracterização da poça de fusão do processo de deposição por energia direcionada (DED) através de processamento de imagens [Internet]. Livro de Resumos Expandidos. 2021 ;[citado 2024 set. 11 ] Available from: http://soac.eesc.usp.br/index.php/siicusp/29siicusp/paper/viewFile/3370/2170
Vancouver
Libutti Nuñez HH, Ribeiro KSB, Coelho RT. Caracterização da poça de fusão do processo de deposição por energia direcionada (DED) através de processamento de imagens [Internet]. Livro de Resumos Expandidos. 2021 ;[citado 2024 set. 11 ] Available from: http://soac.eesc.usp.br/index.php/siicusp/29siicusp/paper/viewFile/3370/2170
Artigo de periodico
Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel (2021)
Souza, Adriel Magalhães; Ferreira, Rodrigo; Barragán, German; Grass Nuñez, Johan; Mariani, Fábio Edson; Silva, Eraldo Jannone da ; Coelho, Reginaldo Teixeira
Source: Journal of Materials Engineering and Performance. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, MANUFATURA, SUPERFÍCIES, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Adriel Magalhães et al. Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel. Journal of Materials Engineering and Performance, p. 1-14, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05991-y. Acesso em: 11 set. 2024.
APA
Souza, A. M., Ferreira, R., Barragán, G., Grass Nuñez, J., Mariani, F. E., Silva, E. J. da, & Coelho, R. T. (2021). Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel. Journal of Materials Engineering and Performance, 1-14. doi:10.1007/s11665-021-05991-y
NLM
Souza AM, Ferreira R, Barragán G, Grass Nuñez J, Mariani FE, Silva EJ da, Coelho RT. Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-14.[citado 2024 set. 11 ] Available from: https://doi.org/10.1007/s11665-021-05991-y
Vancouver
Souza AM, Ferreira R, Barragán G, Grass Nuñez J, Mariani FE, Silva EJ da, Coelho RT. Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-14.[citado 2024 set. 11 ] Available from: https://doi.org/10.1007/s11665-021-05991-y
Trabalho de evento-anais periodico
Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition (2021)
Ribeiro, Kandice Suane Barros ; Mariani, Fábio Edson; Idogava, Henrique Takashi; Silva, Gustavo C. da; Silveira, Zilda de Castro; Lima, Milton Sergio Fernandes de; Coelho, Reginaldo Teixeira
Source: Procedia Manufacturing. Conference titles: SME North American Manufacturing Research Conference - NAMRC. Unidade: EESC
Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros et al. Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier BV. Disponível em: https://doi.org/10.1016/j.promfg.2021.06.040. Acesso em: 11 set. 2024. , 2021
APA
Ribeiro, K. S. B., Mariani, F. E., Idogava, H. T., Silva, G. C. da, Silveira, Z. de C., Lima, M. S. F. de, & Coelho, R. T. (2021). Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier BV. doi:10.1016/j.promfg.2021.06.040
NLM
Ribeiro KSB, Mariani FE, Idogava HT, Silva GC da, Silveira Z de C, Lima MSF de, Coelho RT. Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition [Internet]. Procedia Manufacturing. 2021 ; 53 368-374.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.040
Vancouver
Ribeiro KSB, Mariani FE, Idogava HT, Silva GC da, Silveira Z de C, Lima MSF de, Coelho RT. Evaluation of laser polishing as post-processing of inconel 625 produced by directed energy deposition [Internet]. Procedia Manufacturing. 2021 ; 53 368-374.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.040
Artigo de periodico
Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation (2021)
Silva, Tatiany Mafra; Diniz, Anselmo Eduardo
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: ENGENHARIA DE PRODUÇÃO, TORNEAMENTO, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Tatiany Mafra e DINIZ, Anselmo Eduardo. Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation. International Journal of Advanced Manufacturing Technology, v. 113, p. 1431-1447, 2021Tradução . . Disponível em: https://doi.org/10.1007/s00170-021-06710-6. Acesso em: 11 set. 2024.
APA
Silva, T. M., & Diniz, A. E. (2021). Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation. International Journal of Advanced Manufacturing Technology, 113, 1431-1447. doi:10.1007/s00170-021-06710-6
NLM
Silva TM, Diniz AE. Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 113 1431-1447.[citado 2024 set. 11 ] Available from: https://doi.org/10.1007/s00170-021-06710-6
Vancouver
Silva TM, Diniz AE. Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 113 1431-1447.[citado 2024 set. 11 ] Available from: https://doi.org/10.1007/s00170-021-06710-6
Patente
Método de determinação dos efeitos do atrito na interface cavaco-ferramenta (2021)
Coelho, Reginaldo Teixeira ; Arai, Ricardo; Assis, Cleiton Lazaro Fazolo de
Unidade: EESC
Subjects: TRIBOLOGIA, USINAGEM, FERRAMENTAS, CORTE, ATRITO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira e ARAI, Ricardo e ASSIS, Cleiton Lazaro Fazolo de. Método de determinação dos efeitos do atrito na interface cavaco-ferramenta. . Rio de Janeiro: Instituto Nacional da Propriedade Industrial. Disponível em: https://repositorio.usp.br/item/003082714. Acesso em: 11 set. 2024. , 2021
APA
Coelho, R. T., Arai, R., & Assis, C. L. F. de. (2021). Método de determinação dos efeitos do atrito na interface cavaco-ferramenta. Rio de Janeiro: Instituto Nacional da Propriedade Industrial. Recuperado de https://repositorio.usp.br/item/003082714
NLM
Coelho RT, Arai R, Assis CLF de. Método de determinação dos efeitos do atrito na interface cavaco-ferramenta [Internet]. 2021 ;[citado 2024 set. 11 ] Available from: https://repositorio.usp.br/item/003082714
Vancouver
Coelho RT, Arai R, Assis CLF de. Método de determinação dos efeitos do atrito na interface cavaco-ferramenta [Internet]. 2021 ;[citado 2024 set. 11 ] Available from: https://repositorio.usp.br/item/003082714
Artigo de periodico
Numerical and experimental analysis of gas flow in a coaxial nozzle applied to directed energy deposition (DED) (2021)
Grass Nunez, Johan Sebastian; Rojas Perilla, Daniel Andres; Barragan De Los Rios, German Alberto; Coelho, Reginaldo Teixeira
Source: International Journal of Engineering Materials and Manufacture. Unidade: EESC
Subjects: MANUFATURA ADITIVA, DINÂMICA DOS FLUÍDOS COMPUTACIONAL, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GRASS NUNEZ, Johan Sebastian et al. Numerical and experimental analysis of gas flow in a coaxial nozzle applied to directed energy deposition (DED). International Journal of Engineering Materials and Manufacture, v. 6, n. 3, p. 102-113, 2021Tradução . . Disponível em: https://doi.org/10.26776/ijemm.06.03.2021.01. Acesso em: 11 set. 2024.
APA
Grass Nunez, J. S., Rojas Perilla, D. A., Barragan De Los Rios, G. A., & Coelho, R. T. (2021). Numerical and experimental analysis of gas flow in a coaxial nozzle applied to directed energy deposition (DED). International Journal of Engineering Materials and Manufacture, 6( 3), 102-113. doi:10.26776/ijemm.06.03.2021.01
NLM
Grass Nunez JS, Rojas Perilla DA, Barragan De Los Rios GA, Coelho RT. Numerical and experimental analysis of gas flow in a coaxial nozzle applied to directed energy deposition (DED) [Internet]. International Journal of Engineering Materials and Manufacture. 2021 ; 6( 3): 102-113.[citado 2024 set. 11 ] Available from: https://doi.org/10.26776/ijemm.06.03.2021.01
Vancouver
Grass Nunez JS, Rojas Perilla DA, Barragan De Los Rios GA, Coelho RT. Numerical and experimental analysis of gas flow in a coaxial nozzle applied to directed energy deposition (DED) [Internet]. International Journal of Engineering Materials and Manufacture. 2021 ; 6( 3): 102-113.[citado 2024 set. 11 ] Available from: https://doi.org/10.26776/ijemm.06.03.2021.01
Trabalho de evento-anais periodico
Application of 316L stainless steel coating by directed energy deposition process (2021)
Barragan De Los Rios, German Alberto; Mariani, Fábio Edson; Coelho, Reginaldo Teixeira
Source: IOP Conference. Series: Materials Science and Engineering. Conference titles: Expotecnologia. Unidade: EESC
Subjects: CORROSÃO, REVESTIMENTOS, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARRAGAN DE LOS RIOS, German Alberto e MARIANI, Fábio Edson e COELHO, Reginaldo Teixeira. Application of 316L stainless steel coating by directed energy deposition process. IOP Conference. Series: Materials Science and Engineering. Bristol, United Kingdom: IOP Publishing. Disponível em: https://doi.org/10.1088/1757-899X/526/1/012036. Acesso em: 11 set. 2024. , 2021
APA
Barragan De Los Rios, G. A., Mariani, F. E., & Coelho, R. T. (2021). Application of 316L stainless steel coating by directed energy deposition process. IOP Conference. Series: Materials Science and Engineering. Bristol, United Kingdom: IOP Publishing. doi:10.1088/1757-899X/526/1/012036
NLM
Barragan De Los Rios GA, Mariani FE, Coelho RT. Application of 316L stainless steel coating by directed energy deposition process [Internet]. IOP Conference. Series: Materials Science and Engineering. 2021 ; 1154 1-7.[citado 2024 set. 11 ] Available from: https://doi.org/10.1088/1757-899X/526/1/012036
Vancouver
Barragan De Los Rios GA, Mariani FE, Coelho RT. Application of 316L stainless steel coating by directed energy deposition process [Internet]. IOP Conference. Series: Materials Science and Engineering. 2021 ; 1154 1-7.[citado 2024 set. 11 ] Available from: https://doi.org/10.1088/1757-899X/526/1/012036
Trabalho de evento-anais periodico
Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management (2021)
Almeida, Julia Fornaziero de; Amaral, Daniel Capaldo ; Coelho, Reginaldo Teixeira
Source: Procedia CIRP. Conference titles: CIRP Global Web Conference. Unidade: EESC
Subjects: DESENVOLVIMENTO DE PRODUTOS, PRODUTOS NOVOS, MANUFATURA ADITIVA, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Julia Fornaziero de e AMARAL, Daniel Capaldo e COELHO, Reginaldo Teixeira. Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management. Procedia CIRP. Amsterdam, Netherlands: Elsevier BV. Disponível em: https://doi.org/10.1016/j.procir.2021.10.020. Acesso em: 11 set. 2024. , 2021
APA
Almeida, J. F. de, Amaral, D. C., & Coelho, R. T. (2021). Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management. Procedia CIRP. Amsterdam, Netherlands: Elsevier BV. doi:10.1016/j.procir.2021.10.020
NLM
Almeida JF de, Amaral DC, Coelho RT. Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management [Internet]. Procedia CIRP. 2021 ; 103 128-133.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.procir.2021.10.020
Vancouver
Almeida JF de, Amaral DC, Coelho RT. Innovative framework to manage new product development (NPD) integrating additive manufacturing (AM) and agile management [Internet]. Procedia CIRP. 2021 ; 103 128-133.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.procir.2021.10.020
Artigo de periodico
Ti6Al4V thin walls production using laser directed energy deposition (LDED) process (2021)
Barragan De Los Rios, German Alberto; Mariani, Fábio Edson; Coelho, Reginaldo Teixeira
Source: International Journal of Engineering Materials and Manufacture. Unidade: EESC
Subjects: USINAGEM, TITÂNIO, DESGASTE, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARRAGAN DE LOS RIOS, German Alberto e MARIANI, Fábio Edson e COELHO, Reginaldo Teixeira. Ti6Al4V thin walls production using laser directed energy deposition (LDED) process. International Journal of Engineering Materials and Manufacture, v. 6, n. 3, p. 124-131, 2021Tradução . . Disponível em: https://doi.org/10.26776/ijemm.06.03.2021.03. Acesso em: 11 set. 2024.
APA
Barragan De Los Rios, G. A., Mariani, F. E., & Coelho, R. T. (2021). Ti6Al4V thin walls production using laser directed energy deposition (LDED) process. International Journal of Engineering Materials and Manufacture, 6( 3), 124-131. doi:10.26776/ijemm.06.03.2021.03
NLM
Barragan De Los Rios GA, Mariani FE, Coelho RT. Ti6Al4V thin walls production using laser directed energy deposition (LDED) process [Internet]. International Journal of Engineering Materials and Manufacture. 2021 ; 6( 3): 124-131.[citado 2024 set. 11 ] Available from: https://doi.org/10.26776/ijemm.06.03.2021.03
Vancouver
Barragan De Los Rios GA, Mariani FE, Coelho RT. Ti6Al4V thin walls production using laser directed energy deposition (LDED) process [Internet]. International Journal of Engineering Materials and Manufacture. 2021 ; 6( 3): 124-131.[citado 2024 set. 11 ] Available from: https://doi.org/10.26776/ijemm.06.03.2021.03
Trabalho de evento-anais periodico
Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing (2021)
Dávila, Jose Luis; Inforçatti Neto, Paulo; Noritomi, Pedro Yoshito; Coelho, Reginaldo Teixeira ; Silva, Jorge Vicente Lopes da
Source: Manufacturing Letters. Unidade: EESC
Subjects: ALGORITMOS, MANUFATURA ADITIVA, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DÁVILA, Jose Luis et al. Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing. Manufacturing Letters. Amsterdam, Netherlands: Elsevier BV. Disponível em: https://doi.org/10.1016/j.mfglet.2020.12.003. Acesso em: 11 set. 2024. , 2021
APA
Dávila, J. L., Inforçatti Neto, P., Noritomi, P. Y., Coelho, R. T., & Silva, J. V. L. da. (2021). Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing. Manufacturing Letters. Amsterdam, Netherlands: Elsevier BV. doi:10.1016/j.mfglet.2020.12.003
NLM
Dávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing [Internet]. Manufacturing Letters. 2021 ; 27 53-57.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.mfglet.2020.12.003
Vancouver
Dávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing [Internet]. Manufacturing Letters. 2021 ; 27 53-57.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.mfglet.2020.12.003
Trabalho de evento-anais periodico
A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations (2021)
Ribeiro, Kandice Suane Barros ; Nuñez, Henrique Hiram Libutti; Jones, Jason B; Coates, Peter; Coelho, Reginaldo Teixeira
Source: Procedia Manufacturing. Conference titles: SME North American Manufacturing Research Conference - NAMRC. Unidades: EESC, ICMC
Subjects: MANUFATURA, DESENVOLVIMENTO DE SOFTWARE, BENCHMARKS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros et al. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations. Procedia Manufacturing. Amsterdam: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://doi.org/10.1016/j.promfg.2021.06.058. Acesso em: 11 set. 2024. , 2021
APA
Ribeiro, K. S. B., Nuñez, H. H. L., Jones, J. B., Coates, P., & Coelho, R. T. (2021). A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations. Procedia Manufacturing. Amsterdam: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1016/j.promfg.2021.06.058
NLM
Ribeiro KSB, Nuñez HHL, Jones JB, Coates P, Coelho RT. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations [Internet]. Procedia Manufacturing. 2021 ; 53 576-584.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.058
Vancouver
Ribeiro KSB, Nuñez HHL, Jones JB, Coates P, Coelho RT. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations [Internet]. Procedia Manufacturing. 2021 ; 53 576-584.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.058
Artigo de periodico
Characterization and optimization of process parameters for directed energy deposition powder-fed laser system (2021)
Barragan De Los Rios, German Alberto; Rojas Perilla, Daniel Andres; Grass Nuñez, Johan; Mariani, Fábio Edson; Coelho, Reginaldo Teixeira
Source: Journal of Materials Engineering and Performance. Unidade: EESC
Subjects: MANUFATURA, LASER
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARRAGAN DE LOS RIOS, German Alberto et al. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system. Journal of Materials Engineering and Performance, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05762-9. Acesso em: 11 set. 2024.
APA
Barragan De Los Rios, G. A., Rojas Perilla, D. A., Grass Nuñez, J., Mariani, F. E., & Coelho, R. T. (2021). Characterization and optimization of process parameters for directed energy deposition powder-fed laser system. Journal of Materials Engineering and Performance, 1-10. doi:10.1007/s11665-021-05762-9
NLM
Barragan De Los Rios GA, Rojas Perilla DA, Grass Nuñez J, Mariani FE, Coelho RT. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-10.[citado 2024 set. 11 ] Available from: https://doi.org/10.1007/s11665-021-05762-9
Vancouver
Barragan De Los Rios GA, Rojas Perilla DA, Grass Nuñez J, Mariani FE, Coelho RT. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-10.[citado 2024 set. 11 ] Available from: https://doi.org/10.1007/s11665-021-05762-9
Trabalho de evento
Comparação e ordenação de preferência entre os processos de manufatura aditiva (MA) e usinagem convencional para a fabricação de peças aeronáuticas usando método fuzzy topsis (2021)
Almeida, Julia Fornaziero de; Barragan De Los Rios, German Alberto; Carpinetti, Luiz Cesar Ribeiro ; Coelho, Reginaldo Teixeira
Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC
Subjects: ENGENHARIA DE PRODUÇÃO, MANUFATURA, USINAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Julia Fornaziero de et al. Comparação e ordenação de preferência entre os processos de manufatura aditiva (MA) e usinagem convencional para a fabricação de peças aeronáuticas usando método fuzzy topsis. 2021, Anais.. Rio de Janeiro, RJ: ABCM, 2021. Disponível em: https://repositorio.usp.br/directbitstream/18d57d3a-1629-4a85-a1ae-e11a19561268/Compara%C3%A7%C3%A3o%20e%20Ordena%C3%A7%C3%A3o%20de%20Prefer%C3%AAncia%20entre%20os%20Processos%20de%20Manufatura%20Aditiva%20%28MA%29%20e%20Usinagem%20Convencional%20para%20a%20Fabrica%C3%A7%C3%A3o%20de%20Pe%C3%A7as%20Aeron%C3%A1uticas%20usando%20m%C3%A9todo%20Fuzzy%20TOPSIS.pdf. Acesso em: 11 set. 2024.
APA
Almeida, J. F. de, Barragan De Los Rios, G. A., Carpinetti, L. C. R., & Coelho, R. T. (2021). Comparação e ordenação de preferência entre os processos de manufatura aditiva (MA) e usinagem convencional para a fabricação de peças aeronáuticas usando método fuzzy topsis. In . Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/18d57d3a-1629-4a85-a1ae-e11a19561268/Compara%C3%A7%C3%A3o%20e%20Ordena%C3%A7%C3%A3o%20de%20Prefer%C3%AAncia%20entre%20os%20Processos%20de%20Manufatura%20Aditiva%20%28MA%29%20e%20Usinagem%20Convencional%20para%20a%20Fabrica%C3%A7%C3%A3o%20de%20Pe%C3%A7as%20Aeron%C3%A1uticas%20usando%20m%C3%A9todo%20Fuzzy%20TOPSIS.pdf
NLM
Almeida JF de, Barragan De Los Rios GA, Carpinetti LCR, Coelho RT. Comparação e ordenação de preferência entre os processos de manufatura aditiva (MA) e usinagem convencional para a fabricação de peças aeronáuticas usando método fuzzy topsis [Internet]. 2021 ;[citado 2024 set. 11 ] Available from: https://repositorio.usp.br/directbitstream/18d57d3a-1629-4a85-a1ae-e11a19561268/Compara%C3%A7%C3%A3o%20e%20Ordena%C3%A7%C3%A3o%20de%20Prefer%C3%AAncia%20entre%20os%20Processos%20de%20Manufatura%20Aditiva%20%28MA%29%20e%20Usinagem%20Convencional%20para%20a%20Fabrica%C3%A7%C3%A3o%20de%20Pe%C3%A7as%20Aeron%C3%A1uticas%20usando%20m%C3%A9todo%20Fuzzy%20TOPSIS.pdf
Vancouver
Almeida JF de, Barragan De Los Rios GA, Carpinetti LCR, Coelho RT. Comparação e ordenação de preferência entre os processos de manufatura aditiva (MA) e usinagem convencional para a fabricação de peças aeronáuticas usando método fuzzy topsis [Internet]. 2021 ;[citado 2024 set. 11 ] Available from: https://repositorio.usp.br/directbitstream/18d57d3a-1629-4a85-a1ae-e11a19561268/Compara%C3%A7%C3%A3o%20e%20Ordena%C3%A7%C3%A3o%20de%20Prefer%C3%AAncia%20entre%20os%20Processos%20de%20Manufatura%20Aditiva%20%28MA%29%20e%20Usinagem%20Convencional%20para%20a%20Fabrica%C3%A7%C3%A3o%20de%20Pe%C3%A7as%20Aeron%C3%A1uticas%20usando%20m%C3%A9todo%20Fuzzy%20TOPSIS.pdf
Artigo de periodico
Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel (2021)
Oliveira, Adriel P.; Lima, Luiz H. Q. R.; Felipe, Bianca C. A.; Bolfarini, Claudemiro; Coelho, Reginaldo Teixeira ; Gargarella, Piter
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: TENACIDADE DOS MATERIAIS, MANUFATURA, TERCEIRA DIMENSÃO, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Adriel P. et al. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel. Journal of Materials Research and Technology, v. 15, p. 3598-3506, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.10.011. Acesso em: 11 set. 2024.
APA
Oliveira, A. P., Lima, L. H. Q. R., Felipe, B. C. A., Bolfarini, C., Coelho, R. T., & Gargarella, P. (2021). Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel. Journal of Materials Research and Technology, 15, 3598-3506. doi:10.1016/j.jmrt.2021.10.011
NLM
Oliveira AP, Lima LHQR, Felipe BCA, Bolfarini C, Coelho RT, Gargarella P. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel [Internet]. Journal of Materials Research and Technology. 2021 ; 15 3598-3506.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.jmrt.2021.10.011
Vancouver
Oliveira AP, Lima LHQR, Felipe BCA, Bolfarini C, Coelho RT, Gargarella P. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel [Internet]. Journal of Materials Research and Technology. 2021 ; 15 3598-3506.[citado 2024 set. 11 ] Available from: https://doi.org/10.1016/j.jmrt.2021.10.011

USP Schools

ReP

Filtros

Document Types

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration