ReP USP - Resultado da busca

Artigo de periodico
Ankle torque estimation based on disturbance observers for robotic rehabilitation (2024)
Jaimes, Jonathan Campo ; Orjuela Cañón, Alvaro D.; Siqueira, Adriano Almeida Gonçalves
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ARTICULAÇÕES, TORNOZELO, ROBÓTICA, FILTROS DE KALMAN, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JAIMES, Jonathan Campo e ORJUELA CAÑÓN, Alvaro D. e SIQUEIRA, Adriano Almeida Gonçalves. Ankle torque estimation based on disturbance observers for robotic rehabilitation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-16, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-05132-1. Acesso em: 07 nov. 2024.
APA
Jaimes, J. C., Orjuela Cañón, A. D., & Siqueira, A. A. G. (2024). Ankle torque estimation based on disturbance observers for robotic rehabilitation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-16. doi:10.1007/s40430-024-05132-1
NLM
Jaimes JC, Orjuela Cañón AD, Siqueira AAG. Ankle torque estimation based on disturbance observers for robotic rehabilitation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-024-05132-1
Vancouver
Jaimes JC, Orjuela Cañón AD, Siqueira AAG. Ankle torque estimation based on disturbance observers for robotic rehabilitation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-024-05132-1
Artigo de periodico
Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid (2024)
Nascimento, Erick Oliveira do; Cardenas Contreras, Edwin Martin; Cabezas Gómez, Luben ; Bandarra Filho, Enio Pedone
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, DINÂMICA DOS FLUÍDOS COMPUTACIONAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NASCIMENTO, Erick Oliveira do et al. Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-16, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-05013-7. Acesso em: 07 nov. 2024.
APA
Nascimento, E. O. do, Cardenas Contreras, E. M., Cabezas Gómez, L., & Bandarra Filho, E. P. (2024). Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-16. doi:10.1007/s40430-024-05013-7
NLM
Nascimento EO do, Cardenas Contreras EM, Cabezas Gómez L, Bandarra Filho EP. Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-024-05013-7
Vancouver
Nascimento EO do, Cardenas Contreras EM, Cabezas Gómez L, Bandarra Filho EP. Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofuid [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-16.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-024-05013-7
Artigo de periodico
Rotor frequency response self-identifcation using an active tilting-pad bearing (2024)
Silva, Heitor Antonio Pereira da; Nicoletti, Rodrigo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ELETROMAGNETISMO, LUBRIFICAÇÃO, ROTOR, ROLAMENTOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Heitor Antonio Pereira da e NICOLETTI, Rodrigo. Rotor frequency response self-identifcation using an active tilting-pad bearing. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-12, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-05051-1. Acesso em: 07 nov. 2024.
APA
Silva, H. A. P. da, & Nicoletti, R. (2024). Rotor frequency response self-identifcation using an active tilting-pad bearing. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-12. doi:10.1007/s40430-024-05051-1
NLM
Silva HAP da, Nicoletti R. Rotor frequency response self-identifcation using an active tilting-pad bearing [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-12.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-024-05051-1
Vancouver
Silva HAP da, Nicoletti R. Rotor frequency response self-identifcation using an active tilting-pad bearing [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-12.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-024-05051-1
Artigo de periodico
Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty (2024)
Marini, Vinicius K.; Sorban, Bruno A.; Silva, Maíra Martins da ; Bortolussi, Roberto; Fleury, Agenor de Toledo ; Trigo, Flávio Celso
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EP
Subjects: MOTORES DE COMBUSTÃO INTERNA, VEÍCULOS ELÉTRICOS, DINÂMICA VEICULAR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARINI, Vinicius K. et al. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-14, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04604-0. Acesso em: 07 nov. 2024.
APA
Marini, V. K., Sorban, B. A., Silva, M. M. da, Bortolussi, R., Fleury, A. de T., & Trigo, F. C. (2024). Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-14. doi:10.1007/s40430-023-04604-0
NLM
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Vancouver
Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
Artigo de periodico
Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units (2024)
Martins, Ivan Talão; Fariñas Alvariño, Pablo; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRELIÇAS, FENÔMENOS DE TRANSPORTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Ivan Talão e FARIÑAS ALVARIÑO, Pablo e CABEZAS GÓMEZ, Luben. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-28, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-024-04905-y. Acesso em: 07 nov. 2024.
APA
Martins, I. T., Fariñas Alvariño, P., & Cabezas Gómez, L. (2024). Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-28. doi:10.1007/s40430-024-04905-y
NLM
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Vancouver
Martins IT, Fariñas Alvariño P, Cabezas Gómez L. Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-28.[citado 2024 nov. 07 ] Available from: https://dx.doi.org/10.1007/s40430-024-04905-y
Artigo de periodico
Investigation of rock porosity using vibroacoustography (2024)
Uliana, João Henrique ; Braz, Guilherme de Araújo ; Oliveira, Everton Lucas de; Ferreira, Arthur Gustavo de Araújo ; Morais, Mateus Mota ; Trevizan, Willian Andrighetto; Fortulan, Carlos Alberto ; Bonagamba, Tito José ; Pavan, Theo Zeferino ; Carneiro, Antonio Adilton Oliveira
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, IFSC, FFCLRP
Subjects: CRISTALOGRAFIA, POROSIDADE DO SOLO, ULTRASSOM, RESSONÂNCIA MAGNÉTICA NUCLEAR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ULIANA, João Henrique et al. Investigation of rock porosity using vibroacoustography. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, n. 10, p. 585-1-585-11, 2024Tradução . . Disponível em: https://doi.org/10.1007/s40430-024-05141-0. Acesso em: 07 nov. 2024.
APA
Uliana, J. H., Braz, G. de A., Oliveira, E. L. de, Ferreira, A. G. de A., Morais, M. M., Trevizan, W. A., et al. (2024). Investigation of rock porosity using vibroacoustography. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46( 10), 585-1-585-11. doi:10.1007/s40430-024-05141-0
NLM
Uliana JH, Braz G de A, Oliveira EL de, Ferreira AG de A, Morais MM, Trevizan WA, Fortulan CA, Bonagamba TJ, Pavan TZ, Carneiro AAO. Investigation of rock porosity using vibroacoustography [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46( 10): 585-1-585-11.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-024-05141-0
Vancouver
Uliana JH, Braz G de A, Oliveira EL de, Ferreira AG de A, Morais MM, Trevizan WA, Fortulan CA, Bonagamba TJ, Pavan TZ, Carneiro AAO. Investigation of rock porosity using vibroacoustography [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46( 10): 585-1-585-11.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-024-05141-0
Trabalho de evento
Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue (2023)
Erbereli, Rogério ; Camargo, Italo Leite de ; Marcondes, Cintia Righetti ; Tullio, Rymer Ramiz; Fortulan, Carlos Alberto ; Rollo, João Manuel Domingos de Almeida
Source: Proceedings of the 8th Brazilian Technology Symposium (BTSym’22). BTSym 2022. Smart Innovation, Systems and Technologies. Conference titles: Brazilian Technology Symposium. Unidade: EESC
Subjects: OSSO E OSSOS, HIDROXIAPATITA, DIFRAÇÃO POR RAIOS X, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ERBERELI, Rogério et al. Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue. 2023, Anais.. Berlim, Germany: Springer, 2023. p. 382-390. Disponível em: https://doi.org/10.1007/978-3-031-31007-2_35. Acesso em: 07 nov. 2024.
APA
Erbereli, R., Camargo, I. L. de, Marcondes, C. R., Tullio, R. R., Fortulan, C. A., & Rollo, J. M. D. de A. (2023). Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue. In Proceedings of the 8th Brazilian Technology Symposium (BTSym’22). BTSym 2022. Smart Innovation, Systems and Technologies (Vol. 353, p. 382-390). Berlim, Germany: Springer. doi:10.1007/978-3-031-31007-2_35
NLM
Erbereli R, Camargo IL de, Marcondes CR, Tullio RR, Fortulan CA, Rollo JMD de A. Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue [Internet]. Proceedings of the 8th Brazilian Technology Symposium (BTSym’22). BTSym 2022. Smart Innovation, Systems and Technologies. 2023 ; 353 382-390.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/978-3-031-31007-2_35
Vancouver
Erbereli R, Camargo IL de, Marcondes CR, Tullio RR, Fortulan CA, Rollo JMD de A. Characterization of the bones of different bovine breeds based on the microarchitecture of the bone tissue [Internet]. Proceedings of the 8th Brazilian Technology Symposium (BTSym’22). BTSym 2022. Smart Innovation, Systems and Technologies. 2023 ; 353 382-390.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/978-3-031-31007-2_35
Artigo de periodico
Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling (2022)
Basso, Igor Fernando; Voigt, Rodrigo; Rodrigues, Alessandro Roger ; Marin, Felipe; Souza, Adriano Fagali de; López de Lacalle, Luis Norberto
Source: Journal of Manufacturing Processes. Unidade: EESC
Subjects: FRESAGEM, RUGOSIDADE SUPERFICIAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BASSO, Igor Fernando et al. Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling. Journal of Manufacturing Processes, v. 75, p. 219-231, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jmapro.2021.12.059. Acesso em: 07 nov. 2024.
APA
Basso, I. F., Voigt, R., Rodrigues, A. R., Marin, F., Souza, A. F. de, & López de Lacalle, L. N. (2022). Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling. Journal of Manufacturing Processes, 75, 219-231. doi:10.1016/j.jmapro.2021.12.059
NLM
Basso IF, Voigt R, Rodrigues AR, Marin F, Souza AF de, López de Lacalle LN. Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling [Internet]. Journal of Manufacturing Processes. 2022 ; 75 219-231.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1016/j.jmapro.2021.12.059
Vancouver
Basso IF, Voigt R, Rodrigues AR, Marin F, Souza AF de, López de Lacalle LN. Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling [Internet]. Journal of Manufacturing Processes. 2022 ; 75 219-231.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1016/j.jmapro.2021.12.059
Artigo de periodico
A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil (2022)
Maia, Cristiana Brasil; Silva, Felipe Venâncio Mitkiewicz; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ENERGIA ELÉTRICA, ÁGUA, DESSALINIZAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAIA, Cristiana Brasil e SILVA, Felipe Venâncio Mitkiewicz e CABEZAS GÓMEZ, Luben. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-16, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03463-5. Acesso em: 07 nov. 2024.
APA
Maia, C. B., Silva, F. V. M., & Cabezas Gómez, L. (2022). A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-16. doi:10.1007/s40430-022-03463-5
NLM
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Vancouver
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Artigo de periodico
Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system (2022)
Santos, Fernando Neves Quintino dos; Colmanetti, Alex Roger Almeida; Cabezas Gómez, Luben ; Tibiriçá, Cristiano Bigonha
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: REFRIGERAÇÃO, AQUECIMENTO, GERAÇÃO DE ENERGIA ELÉTRICA, TERMOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Fernando Neves Quintino dos et al. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-11, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03791-6. Acesso em: 07 nov. 2024.
APA
Santos, F. N. Q. dos, Colmanetti, A. R. A., Cabezas Gómez, L., & Tibiriçá, C. B. (2022). Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-11. doi:10.1007/s40430-022-03791-6
NLM
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-022-03791-6
Vancouver
Santos FNQ dos, Colmanetti ARA, Cabezas Gómez L, Tibiriçá CB. Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-11.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-022-03791-6
Artigo de periodico
Toward the use of bond graphs for manufacturing control: improving existing models (2022)
Maluf, Arthur Sarro; Sagawa, Juliana Keiko; Tavares Neto, Roberto Fernandes; Silva, Maíra Martins da
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CONTROLE DA PRODUÇÃO, INDÚSTRIA 4.0, SISTEMAS DINÂMICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALUF, Arthur Sarro et al. Toward the use of bond graphs for manufacturing control: improving existing models. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-17, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03827-x. Acesso em: 07 nov. 2024.
APA
Maluf, A. S., Sagawa, J. K., Tavares Neto, R. F., & Silva, M. M. da. (2022). Toward the use of bond graphs for manufacturing control: improving existing models. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-17. doi:10.1007/s40430-022-03827-x
NLM
Maluf AS, Sagawa JK, Tavares Neto RF, Silva MM da. Toward the use of bond graphs for manufacturing control: improving existing models [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-022-03827-x
Vancouver
Maluf AS, Sagawa JK, Tavares Neto RF, Silva MM da. Toward the use of bond graphs for manufacturing control: improving existing models [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-17.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-022-03827-x
Artigo de periodico
3D printing of trabecular bone-mimetic structures by vat photopolymerization of bovine hydroxyapatite as a potential candidate for scaffolds (2022)
Erbereli, Rogério ; Camargo, Italo Leite de ; Morais, Mateus Mota ; Fortulan, Carlos Alberto
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: IMPRESSÃO, TERCEIRA DIMENSÃO, BIOMATERIAIS, MANUFATURA ADITIVA, HIDROXIAPATITA, PRÓTESES E IMPLANTES, OSSO E OSSOS, BOVINOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ERBERELI, Rogério et al. 3D printing of trabecular bone-mimetic structures by vat photopolymerization of bovine hydroxyapatite as a potential candidate for scaffolds. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, n. 170, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03468-0. Acesso em: 07 nov. 2024.
APA
Erbereli, R., Camargo, I. L. de, Morais, M. M., & Fortulan, C. A. (2022). 3D printing of trabecular bone-mimetic structures by vat photopolymerization of bovine hydroxyapatite as a potential candidate for scaffolds. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44( 170). doi:10.1007/s40430-022-03468-0
NLM
Erbereli R, Camargo IL de, Morais MM, Fortulan CA. 3D printing of trabecular bone-mimetic structures by vat photopolymerization of bovine hydroxyapatite as a potential candidate for scaffolds [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44( 170):[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-022-03468-0
Vancouver
Erbereli R, Camargo IL de, Morais MM, Fortulan CA. 3D printing of trabecular bone-mimetic structures by vat photopolymerization of bovine hydroxyapatite as a potential candidate for scaffolds [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44( 170):[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-022-03468-0
Artigo de periodico
Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges (2021)
Guzella, Matheus dos Santos; Cabezas Gómez, Luben ; Guimarães, Luiz Gustavo Monteiro
Source: Arabian Journal for Science and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, ELETRODOMÉSTICO, REFRIGERAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUZELLA, Matheus dos Santos e CABEZAS GÓMEZ, Luben e GUIMARÃES, Luiz Gustavo Monteiro. Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges. Arabian Journal for Science and Engineering, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s13369-021-05490-1. Acesso em: 07 nov. 2024.
APA
Guzella, M. dos S., Cabezas Gómez, L., & Guimarães, L. G. M. (2021). Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges. Arabian Journal for Science and Engineering, 1-10. doi:10.1007/s13369-021-05490-1
NLM
Guzella M dos S, Cabezas Gómez L, Guimarães LGM. Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges [Internet]. Arabian Journal for Science and Engineering. 2021 ; 1-10.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s13369-021-05490-1
Vancouver
Guzella M dos S, Cabezas Gómez L, Guimarães LGM. Numerical simulation of a single‑compartment household refrigerator during start‑up transient and stationary cyclic operation with diferent refrigerant charges [Internet]. Arabian Journal for Science and Engineering. 2021 ; 1-10.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s13369-021-05490-1
Artigo de periodico
Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method (2021)
Guzella, Matheus dos Santos; Santos, Gustavo Ribeiro dos; Cabezas Gómez, Luben ; Campo, Antonio; Guimarães, Luiz Gustavo Monteiro
Source: International Journal of Applied and Computational Mathematics. Unidade: EESC
Subjects: TRELIÇAS, SIMULAÇÃO, ENGENHARIA MECÂNICA, TERMOELETRICIDADE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUZELLA, Matheus dos Santos et al. Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method. International Journal of Applied and Computational Mathematics, v. 7, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40819-021-01073-8. Acesso em: 07 nov. 2024.
APA
Guzella, M. dos S., Santos, G. R. dos, Cabezas Gómez, L., Campo, A., & Guimarães, L. G. M. (2021). Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method. International Journal of Applied and Computational Mathematics, 7, 1-18. doi:10.1007/s40819-021-01073-8
NLM
Guzella M dos S, Santos GR dos, Cabezas Gómez L, Campo A, Guimarães LGM. Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method [Internet]. International Journal of Applied and Computational Mathematics. 2021 ; 7 1-18.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40819-021-01073-8
Vancouver
Guzella M dos S, Santos GR dos, Cabezas Gómez L, Campo A, Guimarães LGM. Numerical simulation of the two-dimensional heat diffusion in the cold substrate and performance analysis of a thermoelectric air cooler using the lattice Boltzmann method [Internet]. International Journal of Applied and Computational Mathematics. 2021 ; 7 1-18.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40819-021-01073-8
Artigo de periodico
Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin (2021)
Okle, Jan; Noppeney, Victor Tamassia; Cunha, Thiago Boaventura
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CONTROLADORES PROGRAMÁVEIS, SISTEMAS DINÂMICOS, ROBÔS, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OKLE, Jan e NOPPENEY, Victor Tamassia e CUNHA, Thiago Boaventura. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03079-1. Acesso em: 07 nov. 2024.
APA
Okle, J., Noppeney, V. T., & Cunha, T. B. (2021). Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-10. doi:10.1007/s40430-021-03079-1
NLM
Okle J, Noppeney VT, Cunha TB. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-10.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-021-03079-1
Vancouver
Okle J, Noppeney VT, Cunha TB. Certifcation of linear closed-loop controllers using the v-gap metric and the generalized stability margin [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-10.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-021-03079-1
Artigo de periodico
Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network (2021)
Noppeney, Victor Tamassia; Cunha, Thiago Boaventura; Siqueira, Adriano Almeida Gonçalves
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: IMPEDÂNCIA ELÉTRICA, CINEMÁTICA, REDES NEURAIS, QUATERNIOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NOPPENEY, Victor Tamassia e CUNHA, Thiago Boaventura e SIQUEIRA, Adriano Almeida Gonçalves. Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-11, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03157-4. Acesso em: 07 nov. 2024.
APA
Noppeney, V. T., Cunha, T. B., & Siqueira, A. A. G. (2021). Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-11. doi:10.1007/s40430-021-03157-4
NLM
Noppeney VT, Cunha TB, Siqueira AAG. Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-11.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-021-03157-4
Vancouver
Noppeney VT, Cunha TB, Siqueira AAG. Task‑space impedance control of a parallel Delta robot using dual quaternions and a neural network [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-11.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-021-03157-4
Artigo de periodico
Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 (2021)
Jasinevicius, Renato Goulart ; Otoboni, José Antônio; Basso, Igor Fernando; Dib, Marcel Henrique Militão
Source: Journal of Manufacturing Processes. Unidade: EESC
Assunto: ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart et al. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6. Journal of Manufacturing Processes, v. 68, p. 136-157, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmapro.2021.07.027. Acesso em: 07 nov. 2024.
APA
Jasinevicius, R. G., Otoboni, J. A., Basso, I. F., & Dib, M. H. M. (2021). Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6. Journal of Manufacturing Processes, 68, 136-157. doi:10.1016/j.jmapro.2021.07.027
NLM
Jasinevicius RG, Otoboni JA, Basso IF, Dib MHM. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 [Internet]. Journal of Manufacturing Processes. 2021 ; 68 136-157.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1016/j.jmapro.2021.07.027
Vancouver
Jasinevicius RG, Otoboni JA, Basso IF, Dib MHM. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 [Internet]. Journal of Manufacturing Processes. 2021 ; 68 136-157.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1016/j.jmapro.2021.07.027
Artigo de periodico
Dampening of a cantilever beam with large particles in a small cavity: model and experiment (2021)
Gorla, Filipe Debonzi; Nicoletti, Rodrigo
Source: Archive of Applied Mechanics. Unidade: EESC
Subjects: VIBRAÇÕES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GORLA, Filipe Debonzi e NICOLETTI, Rodrigo. Dampening of a cantilever beam with large particles in a small cavity: model and experiment. Archive of Applied Mechanics, p. [1-10], 2021Tradução . . Disponível em: https://doi.org/10.1007/s00419-021-01946-w. Acesso em: 07 nov. 2024.
APA
Gorla, F. D., & Nicoletti, R. (2021). Dampening of a cantilever beam with large particles in a small cavity: model and experiment. Archive of Applied Mechanics, [1-10]. doi:10.1007/s00419-021-01946-w
NLM
Gorla FD, Nicoletti R. Dampening of a cantilever beam with large particles in a small cavity: model and experiment [Internet]. Archive of Applied Mechanics. 2021 ;[1-10].[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s00419-021-01946-w
Vancouver
Gorla FD, Nicoletti R. Dampening of a cantilever beam with large particles in a small cavity: model and experiment [Internet]. Archive of Applied Mechanics. 2021 ;[1-10].[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s00419-021-01946-w
Artigo de periodico
Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) (2021)
Moreira, Tiago Augusto; Duarte, Juliana Pacheco; Nascimento, Francisco Júlio do; Ribatski, Gherhardt
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, NANOPARTÍCULAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Tiago Augusto et al. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03035-z. Acesso em: 07 nov. 2024.
APA
Moreira, T. A., Duarte, J. P., Nascimento, F. J. do, & Ribatski, G. (2021). Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-03035-z
NLM
Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-021-03035-z
Vancouver
Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-021-03035-z
Artigo de periodico
Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions (2021)
Barbosa, Ismael Motta; Alves, Paulo Rodrigues; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TECNOLOGIAS DA SAÚDE, ACIDENTE VASCULAR CEREBRAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Ismael Motta e ALVES, Paulo Rodrigues e SILVEIRA, Zilda de Castro. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-02919-4. Acesso em: 07 nov. 2024.
APA
Barbosa, I. M., Alves, P. R., & Silveira, Z. de C. (2021). Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-02919-4
NLM
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-021-02919-4
Vancouver
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 nov. 07 ] Available from: https://doi.org/10.1007/s40430-021-02919-4

USP Schools

ReP

Filtros

Document Types

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration