ReP USP - Resultado da busca

Artigo de periodico
Enhanced visible light photocatalytic VOC oxidation via Ag-loaded TiO2/SiO2 materials (2024)
Gusmão, Carolina de Araújo ; Palharim, Priscila Hasse ; Ramos, Bruno ; Gouvêa, Douglas ; Rodrigues Junior, Orlando; Teixeira, Antonio Carlos S. C.
Source: Journal of Materials Science; Ceramics. Unidade: EP
Subjects: NANOPARTÍCULAS, FOTOCATÁLISE, OXIDAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUSMÃO, Carolina de Araújo et al. Enhanced visible light photocatalytic VOC oxidation via Ag-loaded TiO2/SiO2 materials. Journal of Materials Science; Ceramics, v. 59, p. 1215-1234, 2024Tradução . . Disponível em: https://doi.org/10.1007/s10853-023-09285-7. Acesso em: 16 nov. 2024.
APA
Gusmão, C. de A., Palharim, P. H., Ramos, B., Gouvêa, D., Rodrigues Junior, O., & Teixeira, A. C. S. C. (2024). Enhanced visible light photocatalytic VOC oxidation via Ag-loaded TiO2/SiO2 materials. Journal of Materials Science; Ceramics, 59, 1215-1234. doi:10.1007/s10853-023-09285-7
NLM
Gusmão C de A, Palharim PH, Ramos B, Gouvêa D, Rodrigues Junior O, Teixeira ACSC. Enhanced visible light photocatalytic VOC oxidation via Ag-loaded TiO2/SiO2 materials [Internet]. Journal of Materials Science; Ceramics. 2024 ; 59 1215-1234.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s10853-023-09285-7
Vancouver
Gusmão C de A, Palharim PH, Ramos B, Gouvêa D, Rodrigues Junior O, Teixeira ACSC. Enhanced visible light photocatalytic VOC oxidation via Ag-loaded TiO2/SiO2 materials [Internet]. Journal of Materials Science; Ceramics. 2024 ; 59 1215-1234.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s10853-023-09285-7
Artigo de periodico
Precipitation and reverted austenite formation in maraging 350 steel: competition or coorperation? (2024)
Feitosa, Ana Larissa Melo ; Ribamar, Giovani Gonçalves; Escobar, Julian ; Sonkusare, R.; Boll, T.; Coury, Fred F.; Ávila, J. A ; Oliveira, J. P; Padilha, Angelo Fernando
Source: Acta Materialia. Unidade: EP
Subjects: AÇO, CINÉTICA, MUDANÇA DE FASE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FEITOSA, Ana Larissa Melo et al. Precipitation and reverted austenite formation in maraging 350 steel: competition or coorperation?. Acta Materialia, v. 270, p. 13 , 2024Tradução . . Disponível em: https://doi.org/10.1016/j.actamat.2024.119865. Acesso em: 16 nov. 2024.
APA
Feitosa, A. L. M., Ribamar, G. G., Escobar, J., Sonkusare, R., Boll, T., Coury, F. F., et al. (2024). Precipitation and reverted austenite formation in maraging 350 steel: competition or coorperation? Acta Materialia, 270, 13 . doi:10.1016/j.actamat.2024.119865
NLM
Feitosa ALM, Ribamar GG, Escobar J, Sonkusare R, Boll T, Coury FF, Ávila JA, Oliveira JP, Padilha AF. Precipitation and reverted austenite formation in maraging 350 steel: competition or coorperation? [Internet]. Acta Materialia. 2024 ; 270 13 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.actamat.2024.119865
Vancouver
Feitosa ALM, Ribamar GG, Escobar J, Sonkusare R, Boll T, Coury FF, Ávila JA, Oliveira JP, Padilha AF. Precipitation and reverted austenite formation in maraging 350 steel: competition or coorperation? [Internet]. Acta Materialia. 2024 ; 270 13 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.actamat.2024.119865
Artigo de periodico
Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA (2024)
Ramirez, Oscar Mauricio Prada ; Almeida, Thassia Felix de; Marin, Jayr Henrique ; Suegama, Patricia Hatsue ; Starykevich, Maksim; Ferreira, Mario G. S; Ando, Rômulo Augusto ; Melo, Hercílio Gomes de
Source: Surface and Coatings Technology. Unidades: EP, IQ
Subjects: HIDRÓLISE, ESPECTROSCOPIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMIREZ, Oscar Mauricio Prada et al. Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA. Surface and Coatings Technology, v. 482, p. 1-13 art. 130683, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.surfcoat.2024.130683. Acesso em: 16 nov. 2024.
APA
Ramirez, O. M. P., Almeida, T. F. de, Marin, J. H., Suegama, P. H., Starykevich, M., Ferreira, M. G. S., et al. (2024). Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA. Surface and Coatings Technology, 482, 1-13 art. 130683. doi:10.1016/j.surfcoat.2024.130683
NLM
Ramirez OMP, Almeida TF de, Marin JH, Suegama PH, Starykevich M, Ferreira MGS, Ando RA, Melo HG de. Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA [Internet]. Surface and Coatings Technology. 2024 ; 482 1-13 art. 130683.[citado 2024 nov. 16 ] Available from: https://dx.doi.org/10.1016/j.surfcoat.2024.130683
Vancouver
Ramirez OMP, Almeida TF de, Marin JH, Suegama PH, Starykevich M, Ferreira MGS, Ando RA, Melo HG de. Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA [Internet]. Surface and Coatings Technology. 2024 ; 482 1-13 art. 130683.[citado 2024 nov. 16 ] Available from: https://dx.doi.org/10.1016/j.surfcoat.2024.130683
Trabalho de evento
Comparasion of class hour taught in six metallurgical engineering coursesb (2024)
Suzuki, David T.; Landgraf, Fernando José Gomes ; Neiva, Augusto Camara
Source: IEEE World Engineering Education Conference (EDUNINE). Unidade: EP
Assunto: ENGENHARIA METALÚRGICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SUZUKI, David T. e LANDGRAF, Fernando José Gomes e NEIVA, Augusto Camara. Comparasion of class hour taught in six metallurgical engineering coursesb. 2024, Anais.. New York: Escola Politécnica, Universidade de São Paulo, 2024. p. 1-6. Disponível em: https://repositorio.usp.br/directbitstream/c6c49032-07a9-4e34-8bdc-e91d0f9402b0/LANDGRAF-2024-3195900-Comparison_of_class_hours_taught_in_six.pdf. Acesso em: 16 nov. 2024.
APA
Suzuki, D. T., Landgraf, F. J. G., & Neiva, A. C. (2024). Comparasion of class hour taught in six metallurgical engineering coursesb. In IEEE World Engineering Education Conference (EDUNINE) (p. 1-6). New York: Escola Politécnica, Universidade de São Paulo. doi:10.1109/EDUNINE60625.2024.1050500683
NLM
Suzuki DT, Landgraf FJG, Neiva AC. Comparasion of class hour taught in six metallurgical engineering coursesb [Internet]. IEEE World Engineering Education Conference (EDUNINE). 2024 ; 1-6.[citado 2024 nov. 16 ] Available from: https://repositorio.usp.br/directbitstream/c6c49032-07a9-4e34-8bdc-e91d0f9402b0/LANDGRAF-2024-3195900-Comparison_of_class_hours_taught_in_six.pdf
Vancouver
Suzuki DT, Landgraf FJG, Neiva AC. Comparasion of class hour taught in six metallurgical engineering coursesb [Internet]. IEEE World Engineering Education Conference (EDUNINE). 2024 ; 1-6.[citado 2024 nov. 16 ] Available from: https://repositorio.usp.br/directbitstream/c6c49032-07a9-4e34-8bdc-e91d0f9402b0/LANDGRAF-2024-3195900-Comparison_of_class_hours_taught_in_six.pdf
Artigo de periodico
Effect of pulse frequency on additive manufacturing by DED-GTA of AISI 308L SS (2024)
Carvalho, Jeferson José de ; Brandi, Sérgio Duarte ; Casanova, Jaime ; Arruda, Nicollas Freitas de ; Centeno, Dany Michell Andrade ; Monlevade, Eduardo Franco de ; Bottene, Alex Camilli
Source: The International Journal of Advanced Manufacturing Technology. Unidade: EP
Subjects: AÇO INOXIDÁVEL AUSTENÍTICO, SOLDAGEM, BAIXA TEMPERATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARVALHO, Jeferson José de et al. Effect of pulse frequency on additive manufacturing by DED-GTA of AISI 308L SS. The International Journal of Advanced Manufacturing Technology, p. 23 , 2024Tradução . . Disponível em: https://doi.org/10.1007/s00170-024-14066-w. Acesso em: 16 nov. 2024.
APA
Carvalho, J. J. de, Brandi, S. D., Casanova, J., Arruda, N. F. de, Centeno, D. M. A., Monlevade, E. F. de, & Bottene, A. C. (2024). Effect of pulse frequency on additive manufacturing by DED-GTA of AISI 308L SS. The International Journal of Advanced Manufacturing Technology, 23 . doi:10.1007/s00170-024-14066-w
NLM
Carvalho JJ de, Brandi SD, Casanova J, Arruda NF de, Centeno DMA, Monlevade EF de, Bottene AC. Effect of pulse frequency on additive manufacturing by DED-GTA of AISI 308L SS [Internet]. The International Journal of Advanced Manufacturing Technology. 2024 ;23 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s00170-024-14066-w
Vancouver
Carvalho JJ de, Brandi SD, Casanova J, Arruda NF de, Centeno DMA, Monlevade EF de, Bottene AC. Effect of pulse frequency on additive manufacturing by DED-GTA of AISI 308L SS [Internet]. The International Journal of Advanced Manufacturing Technology. 2024 ;23 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s00170-024-14066-w
Artigo de periodico
Deciphering gypsum reuse through green composites development and the efect of three diferent bioplasticizers on their properties (2024)
Colina, Grecia G; Souza, Alana Gabrieli de ; Rosa, Derval dos Santos ; Silveira, Eder Baroni da; Valera, Ticiane Sanches ; Wiebeck, Hélio
Source: Iranian Polymer Journal. Unidade: EP
Subjects: GESSO, MATERIAIS COMPÓSITOS, RESÍDUOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COLINA, Grecia G et al. Deciphering gypsum reuse through green composites development and the efect of three diferent bioplasticizers on their properties. Iranian Polymer Journal, p. 14 2024, 2024Tradução . . Disponível em: https://doi.org/10.1007/s13726-024-01393-8. Acesso em: 16 nov. 2024.
APA
Colina, G. G., Souza, A. G. de, Rosa, D. dos S., Silveira, E. B. da, Valera, T. S., & Wiebeck, H. (2024). Deciphering gypsum reuse through green composites development and the efect of three diferent bioplasticizers on their properties. Iranian Polymer Journal, 14 2024. doi:https://doi.org/10.1007/s13726-024-01393-8
NLM
Colina GG, Souza AG de, Rosa D dos S, Silveira EB da, Valera TS, Wiebeck H. Deciphering gypsum reuse through green composites development and the efect of three diferent bioplasticizers on their properties [Internet]. Iranian Polymer Journal. 2024 ; 14 2024.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s13726-024-01393-8
Vancouver
Colina GG, Souza AG de, Rosa D dos S, Silveira EB da, Valera TS, Wiebeck H. Deciphering gypsum reuse through green composites development and the efect of three diferent bioplasticizers on their properties [Internet]. Iranian Polymer Journal. 2024 ; 14 2024.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s13726-024-01393-8
Artigo de periodico
On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction (2024)
Ribamar, Giovani Gonçalves; Miyamoto, Goro; Furuhara, Tadashi; Escobar, J. D.; Ávila, J. A. ; Maawad, E.; Schell, N.; Oliveira, J. P; Goldenstein, Hélio
Source: Metallurgical and Materials Transactions A. Unidade: EP
Subjects: DIFRAÇÃO POR RAIOS X, AÇO, CARBONO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBAMAR, Giovani Gonçalves et al. On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction. Metallurgical and Materials Transactions A, v. 55 A, n. ja, p. 93-100, 2024Tradução . . Disponível em: https://doi.org/10.1007/s11661-023-07229-z. Acesso em: 16 nov. 2024.
APA
Ribamar, G. G., Miyamoto, G., Furuhara, T., Escobar, J. D., Ávila, J. A., Maawad, E., et al. (2024). On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction. Metallurgical and Materials Transactions A, 55 A( ja), 93-100. doi:10.1007/s11661-023-07229-z
NLM
Ribamar GG, Miyamoto G, Furuhara T, Escobar JD, Ávila JA, Maawad E, Schell N, Oliveira JP, Goldenstein H. On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction [Internet]. Metallurgical and Materials Transactions A. 2024 ; 55 A( ja): 93-100.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s11661-023-07229-z
Vancouver
Ribamar GG, Miyamoto G, Furuhara T, Escobar JD, Ávila JA, Maawad E, Schell N, Oliveira JP, Goldenstein H. On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction [Internet]. Metallurgical and Materials Transactions A. 2024 ; 55 A( ja): 93-100.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s11661-023-07229-z
Artigo de periodico
Solid‐state NMR for the analysis of interface excesses in Li‐doped MgAl2O4 nanocrystals (2024)
Bernardes, André Avancini ; Silva, André Luiz da ; Bettini, Jefferson ; Freitas, Jair Carlos Checon de; Castro, Ricardo H. R. ; Gouvêa, Douglas
Source: Journal of the American Ceramic Society. Unidade: EP
Subjects: SINTERIZAÇÃO, ESPINÉLIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BERNARDES, André Avancini et al. Solid‐state NMR for the analysis of interface excesses in Li‐doped MgAl2O4 nanocrystals. Journal of the American Ceramic Society, v. 107, p. 1334–1347, 2024Tradução . . Disponível em: https://doi.org/10.1111/jace.19496. Acesso em: 16 nov. 2024.
APA
Bernardes, A. A., Silva, A. L. da, Bettini, J., Freitas, J. C. C. de, Castro, R. H. R., & Gouvêa, D. (2024). Solid‐state NMR for the analysis of interface excesses in Li‐doped MgAl2O4 nanocrystals. Journal of the American Ceramic Society, 107, 1334–1347. doi:10.1111/jace.19496
NLM
Bernardes AA, Silva AL da, Bettini J, Freitas JCC de, Castro RHR, Gouvêa D. Solid‐state NMR for the analysis of interface excesses in Li‐doped MgAl2O4 nanocrystals [Internet]. Journal of the American Ceramic Society. 2024 ;107 1334–1347.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1111/jace.19496
Vancouver
Bernardes AA, Silva AL da, Bettini J, Freitas JCC de, Castro RHR, Gouvêa D. Solid‐state NMR for the analysis of interface excesses in Li‐doped MgAl2O4 nanocrystals [Internet]. Journal of the American Ceramic Society. 2024 ;107 1334–1347.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1111/jace.19496
Artigo de periodico
Thermal Fatigue of Zircaloy-4 Cladded U-7.5Nb-2.5Zr. (2024)
Morais, Nathanael Wagner Sales ; Monlevade, Eduardo Franco de ; Schön, Cláudio Geraldo
Source: Polytechnica. Unidade: EP
Subjects: MUDANÇA DE FASE, URÂNIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAIS, Nathanael Wagner Sales e MONLEVADE, Eduardo Franco de e SCHÖN, Cláudio Geraldo. Thermal Fatigue of Zircaloy-4 Cladded U-7.5Nb-2.5Zr. Polytechnica, p. 7 , 2024Tradução . . Disponível em: https://doi.org/10.1007/s41050-023-00042-y. Acesso em: 16 nov. 2024.
APA
Morais, N. W. S., Monlevade, E. F. de, & Schön, C. G. (2024). Thermal Fatigue of Zircaloy-4 Cladded U-7.5Nb-2.5Zr. Polytechnica, 7 . doi:10.1007/s41050-023-00042-y
NLM
Morais NWS, Monlevade EF de, Schön CG. Thermal Fatigue of Zircaloy-4 Cladded U-7.5Nb-2.5Zr. [Internet]. Polytechnica. 2024 ;7 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s41050-023-00042-y
Vancouver
Morais NWS, Monlevade EF de, Schön CG. Thermal Fatigue of Zircaloy-4 Cladded U-7.5Nb-2.5Zr. [Internet]. Polytechnica. 2024 ;7 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s41050-023-00042-y
Artigo de periodico
The Role of Carbon Content on the Microstructure of Rapidly Solidified Fe–Cr–Ni Duplex Steels (2024)
Amaral, Emanuelle Machado; Fonseca, Daniela Passarelo Moura da; Candioto, Kátia Cristiane Gandolpho; Padilha, Angelo Fernando
Source: Steel Research International. Unidades: EP, RUSP
Subjects: SOLIDIFICAÇÃO, AÇO, CARBONO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AMARAL, Emanuelle Machado et al. The Role of Carbon Content on the Microstructure of Rapidly Solidified Fe–Cr–Ni Duplex Steels. Steel Research International, p. 9 , 2024Tradução . . Disponível em: https://doi.org/10.1002/srin.202400626. Acesso em: 16 nov. 2024.
APA
Amaral, E. M., Fonseca, D. P. M. da, Candioto, K. C. G., & Padilha, A. F. (2024). The Role of Carbon Content on the Microstructure of Rapidly Solidified Fe–Cr–Ni Duplex Steels. Steel Research International, 9 . doi:10.1002/srin.202400626
NLM
Amaral EM, Fonseca DPM da, Candioto KCG, Padilha AF. The Role of Carbon Content on the Microstructure of Rapidly Solidified Fe–Cr–Ni Duplex Steels [Internet]. Steel Research International. 2024 ;9 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1002/srin.202400626
Vancouver
Amaral EM, Fonseca DPM da, Candioto KCG, Padilha AF. The Role of Carbon Content on the Microstructure of Rapidly Solidified Fe–Cr–Ni Duplex Steels [Internet]. Steel Research International. 2024 ;9 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1002/srin.202400626
Artigo de periodico
Correlation between surface and processing parameters of an Nb-48Ti alloy produced by laser powder bed fusion additive manufacturing (2024)
Morais, Willy Ank de; Guzmán Hernández, Jhoan Sebastian; Machado, Izabel Fernanda; Landgraf, Fernando José Gomes
Source: Tecnologia em Metalurgia, Materiais e Mineração. Unidade: EP
Subjects: MANUFATURA ADITIVA, NIÓBIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAIS, Willy Ank de et al. Correlation between surface and processing parameters of an Nb-48Ti alloy produced by laser powder bed fusion additive manufacturing. Tecnologia em Metalurgia, Materiais e Mineração, v. 21, 2024Tradução . . Disponível em: http://dx.doi.org/10.4322/2176-1523.20242959. Acesso em: 16 nov. 2024.
APA
Morais, W. A. de, Guzmán Hernández, J. S., Machado, I. F., & Landgraf, F. J. G. (2024). Correlation between surface and processing parameters of an Nb-48Ti alloy produced by laser powder bed fusion additive manufacturing. Tecnologia em Metalurgia, Materiais e Mineração, 21. doi:10.4322/2176-1523.20242959
NLM
Morais WA de, Guzmán Hernández JS, Machado IF, Landgraf FJG. Correlation between surface and processing parameters of an Nb-48Ti alloy produced by laser powder bed fusion additive manufacturing [Internet]. Tecnologia em Metalurgia, Materiais e Mineração. 2024 ;21[citado 2024 nov. 16 ] Available from: http://dx.doi.org/10.4322/2176-1523.20242959
Vancouver
Morais WA de, Guzmán Hernández JS, Machado IF, Landgraf FJG. Correlation between surface and processing parameters of an Nb-48Ti alloy produced by laser powder bed fusion additive manufacturing [Internet]. Tecnologia em Metalurgia, Materiais e Mineração. 2024 ;21[citado 2024 nov. 16 ] Available from: http://dx.doi.org/10.4322/2176-1523.20242959
Artigo de jornal
Tecnologia e beleza marcam premiação de melhores imagens científicas de metalurgia e materiais (2024)
Landgraf, Fernando José Gomes ; Mourão, Marcelo Breda ; Vieira Coelho, Antonio Carlos
Source: Institucional. Unidade: EP
Subjects: FOTOMICROGRAFIA, MATERIAIS, MICROSCOPIA ELETRÔNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LANDGRAF, Fernando José Gomes e MOURÃO, Marcelo Breda e VIEIRA COELHO, Antonio Carlos. Tecnologia e beleza marcam premiação de melhores imagens científicas de metalurgia e materiais. Tradução . Institucional, São Paulo, 2024. Disponível em: https://jornal.usp.br/universidade/tecnologia-e-beleza-marcam-premiacao-de-melhores-imagens-cientificas-de-metalurgia-e-materiais. Acesso em: 16 nov. 2024.
APA
Landgraf, F. J. G., Mourão, M. B., & Vieira Coelho, A. C. (2024). Tecnologia e beleza marcam premiação de melhores imagens científicas de metalurgia e materiais. Institucional. São Paulo: Escola Politécnica, Universidade de São Paulo. Recuperado de https://jornal.usp.br/universidade/tecnologia-e-beleza-marcam-premiacao-de-melhores-imagens-cientificas-de-metalurgia-e-materiais
NLM
Landgraf FJG, Mourão MB, Vieira Coelho AC. Tecnologia e beleza marcam premiação de melhores imagens científicas de metalurgia e materiais [Internet]. Institucional. 2024 ;[citado 2024 nov. 16 ] Available from: https://jornal.usp.br/universidade/tecnologia-e-beleza-marcam-premiacao-de-melhores-imagens-cientificas-de-metalurgia-e-materiais
Vancouver
Landgraf FJG, Mourão MB, Vieira Coelho AC. Tecnologia e beleza marcam premiação de melhores imagens científicas de metalurgia e materiais [Internet]. Institucional. 2024 ;[citado 2024 nov. 16 ] Available from: https://jornal.usp.br/universidade/tecnologia-e-beleza-marcam-premiacao-de-melhores-imagens-cientificas-de-metalurgia-e-materiais
Artigo de periodico
Limitation of hydrogen detection after 150 years of research on hydrogen embrittlement (2024)
Tunes, Matheus Araujo ; Uggowitzer, Peter J; Dumitrschkewitz, Phillip; Willenshofer, Patrick; Samberger, Sebastian; Silva, Felipe Carneiro da ; Schön, Cláudio Geraldo ; Kremmer, Thomas M; Antrekowitsch, Helmut; Djukic, Milos B; Pogatscher, Stefan
Source: Advanced Engineering Materials. Unidade: EP
Subjects: HIDROGÊNIO, DENSIDADE, PROPRIEDADES DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TUNES, Matheus Araujo et al. Limitation of hydrogen detection after 150 years of research on hydrogen embrittlement. Advanced Engineering Materials, p. 18 , 2024Tradução . . Disponível em: https://doi.org/10.1002/adem.202400776. Acesso em: 16 nov. 2024.
APA
Tunes, M. A., Uggowitzer, P. J., Dumitrschkewitz, P., Willenshofer, P., Samberger, S., Silva, F. C. da, et al. (2024). Limitation of hydrogen detection after 150 years of research on hydrogen embrittlement. Advanced Engineering Materials, 18 . doi:10.1002/adem.202400776
NLM
Tunes MA, Uggowitzer PJ, Dumitrschkewitz P, Willenshofer P, Samberger S, Silva FC da, Schön CG, Kremmer TM, Antrekowitsch H, Djukic MB, Pogatscher S. Limitation of hydrogen detection after 150 years of research on hydrogen embrittlement [Internet]. Advanced Engineering Materials. 2024 ;18 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1002/adem.202400776
Vancouver
Tunes MA, Uggowitzer PJ, Dumitrschkewitz P, Willenshofer P, Samberger S, Silva FC da, Schön CG, Kremmer TM, Antrekowitsch H, Djukic MB, Pogatscher S. Limitation of hydrogen detection after 150 years of research on hydrogen embrittlement [Internet]. Advanced Engineering Materials. 2024 ;18 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1002/adem.202400776
Artigo de periodico
Effect of Silica Size on the Relative Wear of Microstructures Containing Solidification Carbides and Tempered Martensite Using a Dry Sand Rubber Wheel Test (2024)
Ara, Marcos Henrique ; Ferreira, Raphael Oliveira ; Agudelo, Juan Ignacio Pereira ; Pintaúde, Giuseppe ; Azevedo, Cesar Roberto de Farias
Source: Tribology Transactions. Unidade: EP
Subjects: AÇO, DESGASTE ABRASIVO, ANÁLISE MATEMÁTICA, SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARA, Marcos Henrique et al. Effect of Silica Size on the Relative Wear of Microstructures Containing Solidification Carbides and Tempered Martensite Using a Dry Sand Rubber Wheel Test. Tribology Transactions, p. 18 , 2024Tradução . . Disponível em: https://doi.org/10.1080/10402004.2023.2291109. Acesso em: 16 nov. 2024.
APA
Ara, M. H., Ferreira, R. O., Agudelo, J. I. P., Pintaúde, G., & Azevedo, C. R. de F. (2024). Effect of Silica Size on the Relative Wear of Microstructures Containing Solidification Carbides and Tempered Martensite Using a Dry Sand Rubber Wheel Test. Tribology Transactions, 18 . doi:10.1080/10402004.2023.2291109
NLM
Ara MH, Ferreira RO, Agudelo JIP, Pintaúde G, Azevedo CR de F. Effect of Silica Size on the Relative Wear of Microstructures Containing Solidification Carbides and Tempered Martensite Using a Dry Sand Rubber Wheel Test [Internet]. Tribology Transactions. 2024 ;18 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1080/10402004.2023.2291109
Vancouver
Ara MH, Ferreira RO, Agudelo JIP, Pintaúde G, Azevedo CR de F. Effect of Silica Size on the Relative Wear of Microstructures Containing Solidification Carbides and Tempered Martensite Using a Dry Sand Rubber Wheel Test [Internet]. Tribology Transactions. 2024 ;18 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1080/10402004.2023.2291109
Artigo de periodico
Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil) (2024)
Maia, Rafael Rocha ; Gonçalves, Lucas Nalesso; Darin Filho, Gaspar ; Neiva, Augusto Camara ; Beneduce Neto, Flavio ; Azevedo, Cesar Roberto de Farias ; Landgraf, Fernando José Gomes
Source: Materials Research. Unidades: EP, IF
Subjects: ESCÓRIA, ARTEFATOS (ARQUEOLOGIA), COMPOSIÇÃO QUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAIA, Rafael Rocha et al. Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil). Materials Research, v. 27, p. 11 2024, 2024Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2023-024. Acesso em: 16 nov. 2024.
APA
Maia, R. R., Gonçalves, L. N., Darin Filho, G., Neiva, A. C., Beneduce Neto, F., Azevedo, C. R. de F., & Landgraf, F. J. G. (2024). Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil). Materials Research, 27, 11 2024. doi:10.1590/1980-5373-MR-2023-0248
NLM
Maia RR, Gonçalves LN, Darin Filho G, Neiva AC, Beneduce Neto F, Azevedo CR de F, Landgraf FJG. Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil) [Internet]. Materials Research. 2024 ; 27 11 2024.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-024
Vancouver
Maia RR, Gonçalves LN, Darin Filho G, Neiva AC, Beneduce Neto F, Azevedo CR de F, Landgraf FJG. Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil) [Internet]. Materials Research. 2024 ; 27 11 2024.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-024
Artigo de periodico
Addition of molybdate ions to the anodizing bath to improve the corrosion resistance of clad 2024-T3 alloy anodized in tartaric-sulfuric acid (2024)
Almeida, Thassia Felix de; Ramirez, Oscar Mauricio Prada ; Lanzutti, Alex; Rodrigues, Cleber Lima ; Brabetz, Manfred; Kremmer, Thomas M; Hammer, Peter ; Melo, Hercílio Gomes de
Source: Surface & Coatings Technology. Unidade: EP
Subjects: MICROSCOPIA ELETRÔNICA, ANODIZAÇÃO, ÁCIDO SULFÚRICO, ELETROQUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Thassia Felix de et al. Addition of molybdate ions to the anodizing bath to improve the corrosion resistance of clad 2024-T3 alloy anodized in tartaric-sulfuric acid. Surface & Coatings Technology, v. 482, p. 10 , 2024Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2024.130682. Acesso em: 16 nov. 2024.
APA
Almeida, T. F. de, Ramirez, O. M. P., Lanzutti, A., Rodrigues, C. L., Brabetz, M., Kremmer, T. M., et al. (2024). Addition of molybdate ions to the anodizing bath to improve the corrosion resistance of clad 2024-T3 alloy anodized in tartaric-sulfuric acid. Surface & Coatings Technology, 482, 10 . doi:10.1016/j.surfcoat.2024.130682
NLM
Almeida TF de, Ramirez OMP, Lanzutti A, Rodrigues CL, Brabetz M, Kremmer TM, Hammer P, Melo HG de. Addition of molybdate ions to the anodizing bath to improve the corrosion resistance of clad 2024-T3 alloy anodized in tartaric-sulfuric acid [Internet]. Surface & Coatings Technology. 2024 ; 482 10 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.surfcoat.2024.130682
Vancouver
Almeida TF de, Ramirez OMP, Lanzutti A, Rodrigues CL, Brabetz M, Kremmer TM, Hammer P, Melo HG de. Addition of molybdate ions to the anodizing bath to improve the corrosion resistance of clad 2024-T3 alloy anodized in tartaric-sulfuric acid [Internet]. Surface & Coatings Technology. 2024 ; 482 10 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.surfcoat.2024.130682
Artigo de periodico
Effect of the Cooling Rate on the Microstructure of Directionall Solidified Casting((CMSX-4 Ni SUPERALLO) (2024)
Moreira, Marcelo Ferreira ; Souza, Gabriel Praça de ; Venturelli, Bianka Nani ; Fantin, Luiza ; Azevedo, Cesar Roberto de Farias
Source: International Journal of Metalcasting. Unidade: EP
Subjects: LIGAS REFRATÁRIAS, SOLIDIFICAÇÃO, FUNDIÇÃO, EVOLUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Marcelo Ferreira et al. Effect of the Cooling Rate on the Microstructure of Directionall Solidified Casting((CMSX-4 Ni SUPERALLO). International Journal of Metalcasting, p. 21 , 2024Tradução . . Disponível em: https://doi.org/10.1007/s40962-023-01249-6. Acesso em: 16 nov. 2024.
APA
Moreira, M. F., Souza, G. P. de, Venturelli, B. N., Fantin, L., & Azevedo, C. R. de F. (2024). Effect of the Cooling Rate on the Microstructure of Directionall Solidified Casting((CMSX-4 Ni SUPERALLO). International Journal of Metalcasting, 21 . doi:10.1007/s40962-023-01249-6
NLM
Moreira MF, Souza GP de, Venturelli BN, Fantin L, Azevedo CR de F. Effect of the Cooling Rate on the Microstructure of Directionall Solidified Casting((CMSX-4 Ni SUPERALLO) [Internet]. International Journal of Metalcasting. 2024 ;21 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s40962-023-01249-6
Vancouver
Moreira MF, Souza GP de, Venturelli BN, Fantin L, Azevedo CR de F. Effect of the Cooling Rate on the Microstructure of Directionall Solidified Casting((CMSX-4 Ni SUPERALLO) [Internet]. International Journal of Metalcasting. 2024 ;21 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s40962-023-01249-6
Artigo de periodico
Influence of smectite clays' pores volume on isoniazid adsorption and release (2024)
Arjona, Jéssica de Carvalho ; Ulsen, Carina ; Valenzuela Díaz, Francisco Rolando ; Demarquette, Nicole Raymonde
Source: Applied Clay Science. Unidade: EP
Subjects: ARGILAS, ADSORÇÃO, ANODIZAÇÃO, TERMOGRAVIMETRIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARJONA, Jéssica de Carvalho et al. Influence of smectite clays' pores volume on isoniazid adsorption and release. Applied Clay Science, v. 252, p. 10 art. 107341, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.clay.2024.107341. Acesso em: 16 nov. 2024.
APA
Arjona, J. de C., Ulsen, C., Valenzuela Díaz, F. R., & Demarquette, N. R. (2024). Influence of smectite clays' pores volume on isoniazid adsorption and release. Applied Clay Science, 252, 10 art. 107341. doi:10.1016/j.clay.2024.107341
NLM
Arjona J de C, Ulsen C, Valenzuela Díaz FR, Demarquette NR. Influence of smectite clays' pores volume on isoniazid adsorption and release [Internet]. Applied Clay Science. 2024 ; 252 10 art. 107341.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.clay.2024.107341
Vancouver
Arjona J de C, Ulsen C, Valenzuela Díaz FR, Demarquette NR. Influence of smectite clays' pores volume on isoniazid adsorption and release [Internet]. Applied Clay Science. 2024 ; 252 10 art. 107341.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.clay.2024.107341
Artigo de periodico
Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene (2024)
Sakahara, Rogério Massanori; Silva, Daniel José da ; Hui,Wang Shu
Source: Composites Part B. Unidade: EP
Subjects: POLÍMEROS (MATERIAIS), REOLOGIA, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAKAHARA, Rogério Massanori e SILVA, Daniel José da e HUI, Wang Shu. Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene. Composites Part B, p. 35 , 2024Tradução . . Disponível em: https://doi.org/10.1016/j.compositesb.2024.111392. Acesso em: 16 nov. 2024.
APA
Sakahara, R. M., Silva, D. J. da, & Hui, W. S. (2024). Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene. Composites Part B, 35 . doi:10.1016/j.compositesb.2024.111392
NLM
Sakahara RM, Silva DJ da, Hui WS. Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene [Internet]. Composites Part B. 2024 ;35 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.compositesb.2024.111392
Vancouver
Sakahara RM, Silva DJ da, Hui WS. Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene [Internet]. Composites Part B. 2024 ;35 .[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.compositesb.2024.111392
Artigo de periodico
Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels (2024)
Calderon-Hernández, José Wilmar ; Fonseca, Daniela Passarelo Moura da ; Prada Ramirez, Oscar Mauricio ; Hincapié-Ladino, Duberney ; Melo, Hercílio Gomes de ; Padilha, Angelo Fernando
Source: Journal of Materials Research and Technology. Unidade: EP
Subjects: AÇO, CORROSÃO, MOLIBDÊNIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALDERON-HERNÁNDEZ, José Wilmar et al. Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels. Journal of Materials Research and Technology, p. 29, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2024.04.024. Acesso em: 16 nov. 2024.
APA
Calderon-Hernández, J. W., Fonseca, D. P. M. da, Prada Ramirez, O. M., Hincapié-Ladino, D., Melo, H. G. de, & Padilha, A. F. (2024). Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels. Journal of Materials Research and Technology, 29. doi:10.1016/j.jmrt.2024.04.024
NLM
Calderon-Hernández JW, Fonseca DPM da, Prada Ramirez OM, Hincapié-Ladino D, Melo HG de, Padilha AF. Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels [Internet]. Journal of Materials Research and Technology. 2024 ;29.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.jmrt.2024.04.024
Vancouver
Calderon-Hernández JW, Fonseca DPM da, Prada Ramirez OM, Hincapié-Ladino D, Melo HG de, Padilha AF. Effect of Mo content on microstructure and corrosion behavior in HCl of ultra-high strength maraging steels [Internet]. Journal of Materials Research and Technology. 2024 ;29.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1016/j.jmrt.2024.04.024

USP Schools

ReP

Filtros

Document Types

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Grupo de pesquisa

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration