ReP USP - Resultado da busca

Trabalho de evento
An experimental investigation of transient hot spot effects on the heat transfer during convective boiling inside microchannels (2017)
Aguiar, Gustavo Matana; Moreira, Débora Carneiro; Ribatski, Gherhardt
Conference titles: Journeys in Multiphase Flows - JEM. Unidade: EESC
Assunto: TRANSFERÊNCIA DE CALOR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AGUIAR, Gustavo Matana e MOREIRA, Débora Carneiro e RIBATSKI, Gherhardt. An experimental investigation of transient hot spot effects on the heat transfer during convective boiling inside microchannels. 2017, Anais.. São Paulo, SP: ABCM, 2017. Disponível em: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0012.pdf. Acesso em: 31 maio 2024.
APA
Aguiar, G. M., Moreira, D. C., & Ribatski, G. (2017). An experimental investigation of transient hot spot effects on the heat transfer during convective boiling inside microchannels. In . São Paulo, SP: ABCM. Recuperado de http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0012.pdf
NLM
Aguiar GM, Moreira DC, Ribatski G. An experimental investigation of transient hot spot effects on the heat transfer during convective boiling inside microchannels [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0012.pdf
Vancouver
Aguiar GM, Moreira DC, Ribatski G. An experimental investigation of transient hot spot effects on the heat transfer during convective boiling inside microchannels [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0012.pdf
Trabalho de evento
Experimental evaluation of dynamic structural parameters and design guidelines for tubes under two-phase crossflow induced vibration (2017)
Álvarez Briceño, Ricardo Patricio; Kanizawa, Fabio Toshio; Ribatski, Gherhardt; Oliveira, Leopoldo Pisanelli Rodrigues de
Conference titles: Journeys in Multiphase Flows - JEM. Unidade: EESC
Subjects: ESCOAMENTO MULTIFÁSICO, VIBRAÇÕES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ÁLVAREZ BRICEÑO, Ricardo Patricio et al. Experimental evaluation of dynamic structural parameters and design guidelines for tubes under two-phase crossflow induced vibration. 2017, Anais.. São Paulo, SP: ABCM, 2017. Disponível em: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0025.pdf. Acesso em: 31 maio 2024.
APA
Álvarez Briceño, R. P., Kanizawa, F. T., Ribatski, G., & Oliveira, L. P. R. de. (2017). Experimental evaluation of dynamic structural parameters and design guidelines for tubes under two-phase crossflow induced vibration. In . São Paulo, SP: ABCM. Recuperado de http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0025.pdf
NLM
Álvarez Briceño RP, Kanizawa FT, Ribatski G, Oliveira LPR de. Experimental evaluation of dynamic structural parameters and design guidelines for tubes under two-phase crossflow induced vibration [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0025.pdf
Vancouver
Álvarez Briceño RP, Kanizawa FT, Ribatski G, Oliveira LPR de. Experimental evaluation of dynamic structural parameters and design guidelines for tubes under two-phase crossflow induced vibration [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0025.pdf
Trabalho de evento
Effect of the flow macro-scale on the effective stresses in gas-solid riser flows (2017)
Mouallem, Joseph; Niaki, Seyed Reza Amini ; Chavez, Norman; Netzalaff, Gabriel J. S.; Milioli, Christian Léa Coelho da Costa; Milioli, Fernando Eduardo
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ESCOAMENTO MULTIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOUALLEM, Joseph et al. Effect of the flow macro-scale on the effective stresses in gas-solid riser flows. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/77380a02-b74f-42e7-957d-294ed0fbbb2f/Anais_10-%20Effect%20of%20the%20flow%20macro-scale%20on%20the%20effective%20stresses%20in%20gas-solid%20riser%20flows%20%281%29_removed.pdf. Acesso em: 31 maio 2024.
APA
Mouallem, J., Niaki, S. R. A., Chavez, N., Netzalaff, G. J. S., Milioli, C. L. C. da C., & Milioli, F. E. (2017). Effect of the flow macro-scale on the effective stresses in gas-solid riser flows. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/77380a02-b74f-42e7-957d-294ed0fbbb2f/Anais_10-%20Effect%20of%20the%20flow%20macro-scale%20on%20the%20effective%20stresses%20in%20gas-solid%20riser%20flows%20%281%29_removed.pdf
NLM
Mouallem J, Niaki SRA, Chavez N, Netzalaff GJS, Milioli CLC da C, Milioli FE. Effect of the flow macro-scale on the effective stresses in gas-solid riser flows [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/77380a02-b74f-42e7-957d-294ed0fbbb2f/Anais_10-%20Effect%20of%20the%20flow%20macro-scale%20on%20the%20effective%20stresses%20in%20gas-solid%20riser%20flows%20%281%29_removed.pdf
Vancouver
Mouallem J, Niaki SRA, Chavez N, Netzalaff GJS, Milioli CLC da C, Milioli FE. Effect of the flow macro-scale on the effective stresses in gas-solid riser flows [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/77380a02-b74f-42e7-957d-294ed0fbbb2f/Anais_10-%20Effect%20of%20the%20flow%20macro-scale%20on%20the%20effective%20stresses%20in%20gas-solid%20riser%20flows%20%281%29_removed.pdf
Trabalho de evento
Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory (2017)
Liorbano, Felipe Fernandes; Pelegrineli, Luis Antonio Vieira; Angélico, Ricardo Afonso
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: AERODINÂMICA DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIORBANO, Felipe Fernandes e PELEGRINELI, Luis Antonio Vieira e ANGÉLICO, Ricardo Afonso. Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf. Acesso em: 31 maio 2024.
APA
Liorbano, F. F., Pelegrineli, L. A. V., & Angélico, R. A. (2017). Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf
NLM
Liorbano FF, Pelegrineli LAV, Angélico RA. Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf
Vancouver
Liorbano FF, Pelegrineli LAV, Angélico RA. Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf
Trabalho de evento
Design of planetary mill with friction wheels (2017)
Camargo, Italo Leite de; Lovo, João Fiore Parreira ; Fortulan, Carlos Alberto
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ENGENHARIA MECÂNICA, RETIFICAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMARGO, Italo Leite de e LOVO, João Fiore Parreira e FORTULAN, Carlos Alberto. Design of planetary mill with friction wheels. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/7c6c6ed0-2933-4b38-a8fe-b361755ee90a/Anais_14-%20Design%20of%20planetary%20mill%20with%20friction%20wheels.pdf. Acesso em: 31 maio 2024.
APA
Camargo, I. L. de, Lovo, J. F. P., & Fortulan, C. A. (2017). Design of planetary mill with friction wheels. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/7c6c6ed0-2933-4b38-a8fe-b361755ee90a/Anais_14-%20Design%20of%20planetary%20mill%20with%20friction%20wheels.pdf
NLM
Camargo IL de, Lovo JFP, Fortulan CA. Design of planetary mill with friction wheels [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/7c6c6ed0-2933-4b38-a8fe-b361755ee90a/Anais_14-%20Design%20of%20planetary%20mill%20with%20friction%20wheels.pdf
Vancouver
Camargo IL de, Lovo JFP, Fortulan CA. Design of planetary mill with friction wheels [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/7c6c6ed0-2933-4b38-a8fe-b361755ee90a/Anais_14-%20Design%20of%20planetary%20mill%20with%20friction%20wheels.pdf
Trabalho de evento
A numerical study on the effect of PLY orientation in lamb wave propagation through carbon fiber reinforced composites (2017)
Jaramillo Bustamante, Luis Eduardo; Santana, Humberto Brito; Tita, Volnei ; Ribeiro, Marcelo Leite
Conference titles: ABCM International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, ESTRUTURA DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JARAMILLO BUSTAMANTE, Luis Eduardo et al. A numerical study on the effect of PLY orientation in lamb wave propagation through carbon fiber reinforced composites. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/4febf50a-5f12-41fe-ad14-3e356ed7204b/trabalho%2027%20-%20%20A%20NUMERICAL%20STUDY%20ON%20THE%20EFFECT%20OF%20PLY%20ORIENTATION%20IN%20LAMB%20WAVE%20PROPAGATION%20THROUGH%20CARBON%20FIBER%20REINFORCED%20COMPOSITES%20%28COBEM%202017%29_removed.pdf. Acesso em: 31 maio 2024.
APA
Jaramillo Bustamante, L. E., Santana, H. B., Tita, V., & Ribeiro, M. L. (2017). A numerical study on the effect of PLY orientation in lamb wave propagation through carbon fiber reinforced composites. In . Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/4febf50a-5f12-41fe-ad14-3e356ed7204b/trabalho%2027%20-%20%20A%20NUMERICAL%20STUDY%20ON%20THE%20EFFECT%20OF%20PLY%20ORIENTATION%20IN%20LAMB%20WAVE%20PROPAGATION%20THROUGH%20CARBON%20FIBER%20REINFORCED%20COMPOSITES%20%28COBEM%202017%29_removed.pdf
NLM
Jaramillo Bustamante LE, Santana HB, Tita V, Ribeiro ML. A numerical study on the effect of PLY orientation in lamb wave propagation through carbon fiber reinforced composites [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/4febf50a-5f12-41fe-ad14-3e356ed7204b/trabalho%2027%20-%20%20A%20NUMERICAL%20STUDY%20ON%20THE%20EFFECT%20OF%20PLY%20ORIENTATION%20IN%20LAMB%20WAVE%20PROPAGATION%20THROUGH%20CARBON%20FIBER%20REINFORCED%20COMPOSITES%20%28COBEM%202017%29_removed.pdf
Vancouver
Jaramillo Bustamante LE, Santana HB, Tita V, Ribeiro ML. A numerical study on the effect of PLY orientation in lamb wave propagation through carbon fiber reinforced composites [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/4febf50a-5f12-41fe-ad14-3e356ed7204b/trabalho%2027%20-%20%20A%20NUMERICAL%20STUDY%20ON%20THE%20EFFECT%20OF%20PLY%20ORIENTATION%20IN%20LAMB%20WAVE%20PROPAGATION%20THROUGH%20CARBON%20FIBER%20REINFORCED%20COMPOSITES%20%28COBEM%202017%29_removed.pdf
Trabalho de evento
3D DLP additive manufacturing: printer and validation (2017)
Olmos, Liliane Guardia; Lovo, João Fiore Parreira ; Camargo, Italo Leite de; Consonni, Cintia Rejane; Fortulan, Carlos Alberto
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: IMAGEM 3D, MANUFATURA, IMPRESSÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLMOS, Liliane Guardia et al. 3D DLP additive manufacturing: printer and validation. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/1f440234-1066-434f-b34c-1957ffe4efd7/Anais_15-%203D%20DLP%20additive%20manufacturing%20-%20printer%20and%20validation.pdf. Acesso em: 31 maio 2024.
APA
Olmos, L. G., Lovo, J. F. P., Camargo, I. L. de, Consonni, C. R., & Fortulan, C. A. (2017). 3D DLP additive manufacturing: printer and validation. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/1f440234-1066-434f-b34c-1957ffe4efd7/Anais_15-%203D%20DLP%20additive%20manufacturing%20-%20printer%20and%20validation.pdf
NLM
Olmos LG, Lovo JFP, Camargo IL de, Consonni CR, Fortulan CA. 3D DLP additive manufacturing: printer and validation [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/1f440234-1066-434f-b34c-1957ffe4efd7/Anais_15-%203D%20DLP%20additive%20manufacturing%20-%20printer%20and%20validation.pdf
Vancouver
Olmos LG, Lovo JFP, Camargo IL de, Consonni CR, Fortulan CA. 3D DLP additive manufacturing: printer and validation [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/1f440234-1066-434f-b34c-1957ffe4efd7/Anais_15-%203D%20DLP%20additive%20manufacturing%20-%20printer%20and%20validation.pdf
Trabalho de evento
Dynamic modelling and identification of a planar PKM with several levels of kinematic redundancies (2017)
Fontes, João Vitor de Carvalho ; Santos, João C.; Vieira, Hiparco Lins; Silva, Maíra Martins da
Source: Proceedings. Conference titles: International Symposium on Dynamic Problems of Mechanics - DINAME. Unidade: EESC
Subjects: CINEMÁTICA, MANIPULADORES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FONTES, João Vitor de Carvalho et al. Dynamic modelling and identification of a planar PKM with several levels of kinematic redundancies. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/a7bae0aa-5952-402d-a243-e73134feb935/OK___trabalho%2010%20-%20Dynamic%20Modelling%20and%20Identification%20of%20a%20Planar%20PKM%20with%20Several%20Levels%20of%20Kinematic%20Redundancies%20%28DINAME%202017%29%20%281%29_removed.pdf. Acesso em: 31 maio 2024.
APA
Fontes, J. V. de C., Santos, J. C., Vieira, H. L., & Silva, M. M. da. (2017). Dynamic modelling and identification of a planar PKM with several levels of kinematic redundancies. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/a7bae0aa-5952-402d-a243-e73134feb935/OK___trabalho%2010%20-%20Dynamic%20Modelling%20and%20Identification%20of%20a%20Planar%20PKM%20with%20Several%20Levels%20of%20Kinematic%20Redundancies%20%28DINAME%202017%29%20%281%29_removed.pdf
NLM
Fontes JV de C, Santos JC, Vieira HL, Silva MM da. Dynamic modelling and identification of a planar PKM with several levels of kinematic redundancies [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/a7bae0aa-5952-402d-a243-e73134feb935/OK___trabalho%2010%20-%20Dynamic%20Modelling%20and%20Identification%20of%20a%20Planar%20PKM%20with%20Several%20Levels%20of%20Kinematic%20Redundancies%20%28DINAME%202017%29%20%281%29_removed.pdf
Vancouver
Fontes JV de C, Santos JC, Vieira HL, Silva MM da. Dynamic modelling and identification of a planar PKM with several levels of kinematic redundancies [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/a7bae0aa-5952-402d-a243-e73134feb935/OK___trabalho%2010%20-%20Dynamic%20Modelling%20and%20Identification%20of%20a%20Planar%20PKM%20with%20Several%20Levels%20of%20Kinematic%20Redundancies%20%28DINAME%202017%29%20%281%29_removed.pdf
Trabalho de evento
On the design and technology of co-rotating twin screw extruders (2017)
Justino Netto, Joaquim Manoel; Silveira, Zilda de Castro
Source: Proceedings. Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC
Subjects: MANUFATURA ADITIVA, EXTRUSÃO, POLÍMEROS (MATERIAIS), ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JUSTINO NETTO, Joaquim Manoel e SILVEIRA, Zilda de Castro. On the design and technology of co-rotating twin screw extruders. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/4408acc3-7491-49fa-9e52-6feea63d3170/OK___trabalho%2015%20-%20On%20the%20design%20and%20technology%20of%20co-rotating%20twin-screw%20extruders%20%28COBEF%202017%29_removed%20%281%29.pdf. Acesso em: 31 maio 2024.
APA
Justino Netto, J. M., & Silveira, Z. de C. (2017). On the design and technology of co-rotating twin screw extruders. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/4408acc3-7491-49fa-9e52-6feea63d3170/OK___trabalho%2015%20-%20On%20the%20design%20and%20technology%20of%20co-rotating%20twin-screw%20extruders%20%28COBEF%202017%29_removed%20%281%29.pdf
NLM
Justino Netto JM, Silveira Z de C. On the design and technology of co-rotating twin screw extruders [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/4408acc3-7491-49fa-9e52-6feea63d3170/OK___trabalho%2015%20-%20On%20the%20design%20and%20technology%20of%20co-rotating%20twin-screw%20extruders%20%28COBEF%202017%29_removed%20%281%29.pdf
Vancouver
Justino Netto JM, Silveira Z de C. On the design and technology of co-rotating twin screw extruders [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/4408acc3-7491-49fa-9e52-6feea63d3170/OK___trabalho%2015%20-%20On%20the%20design%20and%20technology%20of%20co-rotating%20twin-screw%20extruders%20%28COBEF%202017%29_removed%20%281%29.pdf
Trabalho de evento
Análise das forças de usinagem durante a formação do cavaco em microfresamento (2017)
Dib, Marcel Henrique Militão; Dias, Dhiego de Godoi; Jasinevicius, Renato Goulart
Source: Proceedings. Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC
Subjects: USINAGEM, RESISTÊNCIA DOS MATERIAIS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIB, Marcel Henrique Militão e DIAS, Dhiego de Godoi e JASINEVICIUS, Renato Goulart. Análise das forças de usinagem durante a formação do cavaco em microfresamento. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/a957c7db-ca81-4936-84db-aeacd0553870/OK___trabalho%2011%20-%20An%C3%A1lise%20das%20for%C3%A7as%20de%20usinagem%20durante%20a%20forma%C3%A7%C3%A3o%20do%20cavaco%20em%20microfresamento%20%28COBEF%202017%29_removed.pdf. Acesso em: 31 maio 2024.
APA
Dib, M. H. M., Dias, D. de G., & Jasinevicius, R. G. (2017). Análise das forças de usinagem durante a formação do cavaco em microfresamento. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/a957c7db-ca81-4936-84db-aeacd0553870/OK___trabalho%2011%20-%20An%C3%A1lise%20das%20for%C3%A7as%20de%20usinagem%20durante%20a%20forma%C3%A7%C3%A3o%20do%20cavaco%20em%20microfresamento%20%28COBEF%202017%29_removed.pdf
NLM
Dib MHM, Dias D de G, Jasinevicius RG. Análise das forças de usinagem durante a formação do cavaco em microfresamento [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/a957c7db-ca81-4936-84db-aeacd0553870/OK___trabalho%2011%20-%20An%C3%A1lise%20das%20for%C3%A7as%20de%20usinagem%20durante%20a%20forma%C3%A7%C3%A3o%20do%20cavaco%20em%20microfresamento%20%28COBEF%202017%29_removed.pdf
Vancouver
Dib MHM, Dias D de G, Jasinevicius RG. Análise das forças de usinagem durante a formação do cavaco em microfresamento [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/a957c7db-ca81-4936-84db-aeacd0553870/OK___trabalho%2011%20-%20An%C3%A1lise%20das%20for%C3%A7as%20de%20usinagem%20durante%20a%20forma%C3%A7%C3%A3o%20do%20cavaco%20em%20microfresamento%20%28COBEF%202017%29_removed.pdf
Trabalho de evento
Experimental study of penetration depth produced by a plunging jet system (2017)
Miranda Lugo, Pedro José; Sansão, Douglas Ricardo; Ortiz Vidal, Luis Enrique; Hernandez Rodriguez, Oscar Mauricio
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: PROCESSAMENTO DE IMAGENS, ESCOAMENTO BIFÁSICO, DINÂMICA DOS FLUÍDOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MIRANDA LUGO, Pedro José et al. Experimental study of penetration depth produced by a plunging jet system. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/2e628142-71e7-46fb-8e2a-2f188afe3aea/OK___trabalho%2020%20-%20Experimental%20study%20of%20penetration%20depth%20produced%20by%20a%20plunging%20jet%20system%20%28COBEM%202017%29.pdf. Acesso em: 31 maio 2024.
APA
Miranda Lugo, P. J., Sansão, D. R., Ortiz Vidal, L. E., & Hernandez Rodriguez, O. M. (2017). Experimental study of penetration depth produced by a plunging jet system. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/2e628142-71e7-46fb-8e2a-2f188afe3aea/OK___trabalho%2020%20-%20Experimental%20study%20of%20penetration%20depth%20produced%20by%20a%20plunging%20jet%20system%20%28COBEM%202017%29.pdf
NLM
Miranda Lugo PJ, Sansão DR, Ortiz Vidal LE, Hernandez Rodriguez OM. Experimental study of penetration depth produced by a plunging jet system [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/2e628142-71e7-46fb-8e2a-2f188afe3aea/OK___trabalho%2020%20-%20Experimental%20study%20of%20penetration%20depth%20produced%20by%20a%20plunging%20jet%20system%20%28COBEM%202017%29.pdf
Vancouver
Miranda Lugo PJ, Sansão DR, Ortiz Vidal LE, Hernandez Rodriguez OM. Experimental study of penetration depth produced by a plunging jet system [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/2e628142-71e7-46fb-8e2a-2f188afe3aea/OK___trabalho%2020%20-%20Experimental%20study%20of%20penetration%20depth%20produced%20by%20a%20plunging%20jet%20system%20%28COBEM%202017%29.pdf
Trabalho de evento
Modeling and control of a macro-micro system using interaction controllers (2017)
Lahr, Gustavo José Giardini; Costa, Lucas Fideles; Cunha, Thiago Boaventura; Caurin, Glauco Augusto de Paula
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ROBÔS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAHR, Gustavo José Giardini et al. Modeling and control of a macro-micro system using interaction controllers. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/11cb6355-706e-45cb-b984-62d156895fe7/OK___trabalho%2009%20-%20Modelling%20and%20control%20of%20a%20macro-micro%20system%20using%20interaction%20controllers%20%28COBEM%202017%29%20%281%29.pdf. Acesso em: 31 maio 2024.
APA
Lahr, G. J. G., Costa, L. F., Cunha, T. B., & Caurin, G. A. de P. (2017). Modeling and control of a macro-micro system using interaction controllers. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/11cb6355-706e-45cb-b984-62d156895fe7/OK___trabalho%2009%20-%20Modelling%20and%20control%20of%20a%20macro-micro%20system%20using%20interaction%20controllers%20%28COBEM%202017%29%20%281%29.pdf
NLM
Lahr GJG, Costa LF, Cunha TB, Caurin GA de P. Modeling and control of a macro-micro system using interaction controllers [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/11cb6355-706e-45cb-b984-62d156895fe7/OK___trabalho%2009%20-%20Modelling%20and%20control%20of%20a%20macro-micro%20system%20using%20interaction%20controllers%20%28COBEM%202017%29%20%281%29.pdf
Vancouver
Lahr GJG, Costa LF, Cunha TB, Caurin GA de P. Modeling and control of a macro-micro system using interaction controllers [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/11cb6355-706e-45cb-b984-62d156895fe7/OK___trabalho%2009%20-%20Modelling%20and%20control%20of%20a%20macro-micro%20system%20using%20interaction%20controllers%20%28COBEM%202017%29%20%281%29.pdf
Trabalho de evento
CFD simulation of two-phase flow in a venturi scrubber: validation and comparison of secondary atomization models (2017)
Zerwas, Alexander Ariyoshi ; Paiva, José Luís de
Conference titles: Journeys in Multiphase Flows - JEM. Unidade: EP
Subjects: DINÂMICA DOS FLUÍDOS COMPUTACIONAL, ATOMIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZERWAS, Alexander Ariyoshi e PAIVA, José Luís de. CFD simulation of two-phase flow in a venturi scrubber: validation and comparison of secondary atomization models. 2017, Anais.. Sao Paulo: ABCM, 2017. Disponível em: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0013.pdf. Acesso em: 31 maio 2024.
APA
Zerwas, A. A., & Paiva, J. L. de. (2017). CFD simulation of two-phase flow in a venturi scrubber: validation and comparison of secondary atomization models. In . Sao Paulo: ABCM. Recuperado de http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0013.pdf
NLM
Zerwas AA, Paiva JL de. CFD simulation of two-phase flow in a venturi scrubber: validation and comparison of secondary atomization models [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0013.pdf
Vancouver
Zerwas AA, Paiva JL de. CFD simulation of two-phase flow in a venturi scrubber: validation and comparison of secondary atomization models [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: http://eventos.abcm.org.br/jem2017/content/uploads/2017/03/JEM-2017-0013.pdf
Trabalho de evento
Slat noise: experimental and numerical efforts at USP-São Carlos (2017)
Souza, Daniel Sampaio; Pagani Júnior, Carlos do Carmo; Amaral, Filipe Ramos do; Himeno, Fernando Henrique Tadashi; Rodriguez, Daniel; Medeiros, Marcello Augusto Faraco de
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: TÚNEIS DE VENTO, SLATS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Daniel Sampaio et al. Slat noise: experimental and numerical efforts at USP-São Carlos. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/63ab2f29-315e-4190-8228-e7a09259f2ef/trabalho%2015%20-%20Slat%20noise%20Experimental%20and%20numerical%20efforts%20at%20USP-S%C3%A3o%20Carlos%20%28COBEM%202017%29.pdf. Acesso em: 31 maio 2024.
APA
Souza, D. S., Pagani Júnior, C. do C., Amaral, F. R. do, Himeno, F. H. T., Rodriguez, D., & Medeiros, M. A. F. de. (2017). Slat noise: experimental and numerical efforts at USP-São Carlos. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/63ab2f29-315e-4190-8228-e7a09259f2ef/trabalho%2015%20-%20Slat%20noise%20Experimental%20and%20numerical%20efforts%20at%20USP-S%C3%A3o%20Carlos%20%28COBEM%202017%29.pdf
NLM
Souza DS, Pagani Júnior C do C, Amaral FR do, Himeno FHT, Rodriguez D, Medeiros MAF de. Slat noise: experimental and numerical efforts at USP-São Carlos [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/63ab2f29-315e-4190-8228-e7a09259f2ef/trabalho%2015%20-%20Slat%20noise%20Experimental%20and%20numerical%20efforts%20at%20USP-S%C3%A3o%20Carlos%20%28COBEM%202017%29.pdf
Vancouver
Souza DS, Pagani Júnior C do C, Amaral FR do, Himeno FHT, Rodriguez D, Medeiros MAF de. Slat noise: experimental and numerical efforts at USP-São Carlos [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/63ab2f29-315e-4190-8228-e7a09259f2ef/trabalho%2015%20-%20Slat%20noise%20Experimental%20and%20numerical%20efforts%20at%20USP-S%C3%A3o%20Carlos%20%28COBEM%202017%29.pdf
Trabalho de evento
Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils (2017)
Pereira, Daniel Almeida; Santos, Carlos Renan dos ; Marques, Flavio Donizeti
Source: Proceedings. Conference titles: International Symposium on Dynamic Problems of Mechanics - DINAME. Unidade: EESC
Subjects: AEROELASTICIDADE DE AERONAVES, AEROFÓLIOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Daniel Almeida e SANTOS, Carlos Renan dos e MARQUES, Flavio Donizeti. Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/2944c4eb-e02f-4c63-968d-6fe84db91245/PROD_25662_SYSNO_3123990.pdf. Acesso em: 31 maio 2024.
APA
Pereira, D. A., Santos, C. R. dos, & Marques, F. D. (2017). Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/2944c4eb-e02f-4c63-968d-6fe84db91245/PROD_25662_SYSNO_3123990.pdf
NLM
Pereira DA, Santos CR dos, Marques FD. Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/2944c4eb-e02f-4c63-968d-6fe84db91245/PROD_25662_SYSNO_3123990.pdf
Vancouver
Pereira DA, Santos CR dos, Marques FD. Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/2944c4eb-e02f-4c63-968d-6fe84db91245/PROD_25662_SYSNO_3123990.pdf
Trabalho de evento
Investigation of motion planning methods with a kinematically redundant manipulator (2017)
Santos, João Cavalcanti; Silva, Maíra Martins da
Source: Proceedings. Conference titles: International Symposium on Dynamic Problems of Mechanics - DINAME. Unidade: EESC
Subjects: MANIPULADORES, CINEMÁTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, João Cavalcanti e SILVA, Maíra Martins da. Investigation of motion planning methods with a kinematically redundant manipulator. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/f5d98f9e-2070-427f-9072-0da98f0782db/OK___trabalho%2009%20-%20Investigation%20of%20motion%20planning%20methods%20with%20a%20kinematically%20redundant%20parallel%20manipulator%20%28DINAME%202017%29_removed.pdf. Acesso em: 31 maio 2024.
APA
Santos, J. C., & Silva, M. M. da. (2017). Investigation of motion planning methods with a kinematically redundant manipulator. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/f5d98f9e-2070-427f-9072-0da98f0782db/OK___trabalho%2009%20-%20Investigation%20of%20motion%20planning%20methods%20with%20a%20kinematically%20redundant%20parallel%20manipulator%20%28DINAME%202017%29_removed.pdf
NLM
Santos JC, Silva MM da. Investigation of motion planning methods with a kinematically redundant manipulator [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/f5d98f9e-2070-427f-9072-0da98f0782db/OK___trabalho%2009%20-%20Investigation%20of%20motion%20planning%20methods%20with%20a%20kinematically%20redundant%20parallel%20manipulator%20%28DINAME%202017%29_removed.pdf
Vancouver
Santos JC, Silva MM da. Investigation of motion planning methods with a kinematically redundant manipulator [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/f5d98f9e-2070-427f-9072-0da98f0782db/OK___trabalho%2009%20-%20Investigation%20of%20motion%20planning%20methods%20with%20a%20kinematically%20redundant%20parallel%20manipulator%20%28DINAME%202017%29_removed.pdf
Trabalho de evento
Lattice Boltzmann simulation of a droplet interaction with a solid surface (2017)
Ribeiro, Gustavo dos Santos; Guzella, Matheus dos Santos; Cabezas Gómez, Luben
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Gustavo dos Santos e GUZELLA, Matheus dos Santos e CABEZAS GÓMEZ, Luben. Lattice Boltzmann simulation of a droplet interaction with a solid surface. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/6ba335fd-8630-4bf1-a7b4-9ce14f828d2a/OK___trabalho%2027%20-%20Lattice%20Boltzmann%20simulation%20of%20a%20droplet%20interaction%20with%20a%20solid%20surface_removed.pdf. Acesso em: 31 maio 2024.
APA
Ribeiro, G. dos S., Guzella, M. dos S., & Cabezas Gómez, L. (2017). Lattice Boltzmann simulation of a droplet interaction with a solid surface. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/6ba335fd-8630-4bf1-a7b4-9ce14f828d2a/OK___trabalho%2027%20-%20Lattice%20Boltzmann%20simulation%20of%20a%20droplet%20interaction%20with%20a%20solid%20surface_removed.pdf
NLM
Ribeiro G dos S, Guzella M dos S, Cabezas Gómez L. Lattice Boltzmann simulation of a droplet interaction with a solid surface [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/6ba335fd-8630-4bf1-a7b4-9ce14f828d2a/OK___trabalho%2027%20-%20Lattice%20Boltzmann%20simulation%20of%20a%20droplet%20interaction%20with%20a%20solid%20surface_removed.pdf
Vancouver
Ribeiro G dos S, Guzella M dos S, Cabezas Gómez L. Lattice Boltzmann simulation of a droplet interaction with a solid surface [Internet]. Anais. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/6ba335fd-8630-4bf1-a7b4-9ce14f828d2a/OK___trabalho%2027%20-%20Lattice%20Boltzmann%20simulation%20of%20a%20droplet%20interaction%20with%20a%20solid%20surface_removed.pdf
Trabalho de evento
Numerical simulation of the performance of a household refrigerator during start-up and cycling operations (2017)
Guzella, Matheus dos Santos; Cabezas Gómez, Luben
Conference titles: Journeys in Multiphase Flows - JEM. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, REFRIGERAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUZELLA, Matheus dos Santos e CABEZAS GÓMEZ, Luben. Numerical simulation of the performance of a household refrigerator during start-up and cycling operations. 2017, Anais.. São Paulo, SP: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/9bb6029d-f5cd-4318-a0e5-9276b7d0bdc7/OK___trabalho%2024%20-%20Numerical%20simulation%20of%20the%20performance%20of%20a%20household%20refrigerator%20during%20star-up%20and%20cycling%20operations.%20%284th%20Multiphase%20flows%20Journeys%29%20%281%29.pdf. Acesso em: 31 maio 2024.
APA
Guzella, M. dos S., & Cabezas Gómez, L. (2017). Numerical simulation of the performance of a household refrigerator during start-up and cycling operations. In . São Paulo, SP: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/9bb6029d-f5cd-4318-a0e5-9276b7d0bdc7/OK___trabalho%2024%20-%20Numerical%20simulation%20of%20the%20performance%20of%20a%20household%20refrigerator%20during%20star-up%20and%20cycling%20operations.%20%284th%20Multiphase%20flows%20Journeys%29%20%281%29.pdf
NLM
Guzella M dos S, Cabezas Gómez L. Numerical simulation of the performance of a household refrigerator during start-up and cycling operations [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/9bb6029d-f5cd-4318-a0e5-9276b7d0bdc7/OK___trabalho%2024%20-%20Numerical%20simulation%20of%20the%20performance%20of%20a%20household%20refrigerator%20during%20star-up%20and%20cycling%20operations.%20%284th%20Multiphase%20flows%20Journeys%29%20%281%29.pdf
Vancouver
Guzella M dos S, Cabezas Gómez L. Numerical simulation of the performance of a household refrigerator during start-up and cycling operations [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/9bb6029d-f5cd-4318-a0e5-9276b7d0bdc7/OK___trabalho%2024%20-%20Numerical%20simulation%20of%20the%20performance%20of%20a%20household%20refrigerator%20during%20star-up%20and%20cycling%20operations.%20%284th%20Multiphase%20flows%20Journeys%29%20%281%29.pdf
Trabalho de evento
Fidelidade da replicação de lentes poliméricas injetadas em insertos de cobre eletrolítico usinados por ultra-precisão com ferramenta de diamante (2017)
Pinto, José Ricardo Camilo; Granado, Renê Mendes; Jasinevicius, Renato Goulart ; Cirino, Giuseppe Antonio
Source: Proceedings. Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC
Subjects: USINAGEM, MATERIAIS ÓPTICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINTO, José Ricardo Camilo et al. Fidelidade da replicação de lentes poliméricas injetadas em insertos de cobre eletrolítico usinados por ultra-precisão com ferramenta de diamante. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/8242a73f-da85-4b05-9b1a-a387474f834f/OK___trabalho%2009%20-%20FIDELIDADE%20DA%20REPLICA%C3%87%C3%83O%20DE%20LENTES%20POLIM%C3%89RICAS%20INJETADAS..%20%28COBEF%202017%29.pdf. Acesso em: 31 maio 2024.
APA
Pinto, J. R. C., Granado, R. M., Jasinevicius, R. G., & Cirino, G. A. (2017). Fidelidade da replicação de lentes poliméricas injetadas em insertos de cobre eletrolítico usinados por ultra-precisão com ferramenta de diamante. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/8242a73f-da85-4b05-9b1a-a387474f834f/OK___trabalho%2009%20-%20FIDELIDADE%20DA%20REPLICA%C3%87%C3%83O%20DE%20LENTES%20POLIM%C3%89RICAS%20INJETADAS..%20%28COBEF%202017%29.pdf
NLM
Pinto JRC, Granado RM, Jasinevicius RG, Cirino GA. Fidelidade da replicação de lentes poliméricas injetadas em insertos de cobre eletrolítico usinados por ultra-precisão com ferramenta de diamante [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/8242a73f-da85-4b05-9b1a-a387474f834f/OK___trabalho%2009%20-%20FIDELIDADE%20DA%20REPLICA%C3%87%C3%83O%20DE%20LENTES%20POLIM%C3%89RICAS%20INJETADAS..%20%28COBEF%202017%29.pdf
Vancouver
Pinto JRC, Granado RM, Jasinevicius RG, Cirino GA. Fidelidade da replicação de lentes poliméricas injetadas em insertos de cobre eletrolítico usinados por ultra-precisão com ferramenta de diamante [Internet]. Proceedings. 2017 ;[citado 2024 maio 31 ] Available from: https://repositorio.usp.br/directbitstream/8242a73f-da85-4b05-9b1a-a387474f834f/OK___trabalho%2009%20-%20FIDELIDADE%20DA%20REPLICA%C3%87%C3%83O%20DE%20LENTES%20POLIM%C3%89RICAS%20INJETADAS..%20%28COBEF%202017%29.pdf
Trabalho de evento
Feasibility of using a hydrocyclone as a core annilar flow promoter in vertical pipes: an experimental investigation (2017)
Coelho, Nelize Maria de Almeida; Souza, Nayara Mota Oliveira; Andreolli, Ivanilto; Paiva, José Luís de ; Moraes Júnior, Deovaldo
Conference titles: Journeys in Multiphase Flows - JEM. Unidade: EP
Subjects: EQUILÍBRIO LÍQUIDO-LÍQUIDO, HIDROCICLONES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Nelize Maria de Almeida et al. Feasibility of using a hydrocyclone as a core annilar flow promoter in vertical pipes: an experimental investigation. 2017, Anais.. Sao Paulo: ABCM, 2017. Disponível em: https://www.researchgate.net/profile/Nelize-Coelho/publication/315793771_FEASIBILITY_OF_USING_A_HYDROCYCLONE_AS_A_CORE_ANNULAR_FLOW_PROMOTER_IN_VERTICAL_PIPES_AN_EXPERIMENTAL_INVESTIGATION/links/58e57c0faca2727858c92217/FEASIBILITY-OF-USING-A-HYDROCYCLONE-AS-A-CORE-ANNULAR-FLOW-PROMOTER-IN-VERTICAL-PIPES-AN-EXPERIMENTAL-INVESTIGATION.pdf. Acesso em: 31 maio 2024.
APA
Coelho, N. M. de A., Souza, N. M. O., Andreolli, I., Paiva, J. L. de, & Moraes Júnior, D. (2017). Feasibility of using a hydrocyclone as a core annilar flow promoter in vertical pipes: an experimental investigation. In . Sao Paulo: ABCM. Recuperado de https://www.researchgate.net/profile/Nelize-Coelho/publication/315793771_FEASIBILITY_OF_USING_A_HYDROCYCLONE_AS_A_CORE_ANNULAR_FLOW_PROMOTER_IN_VERTICAL_PIPES_AN_EXPERIMENTAL_INVESTIGATION/links/58e57c0faca2727858c92217/FEASIBILITY-OF-USING-A-HYDROCYCLONE-AS-A-CORE-ANNULAR-FLOW-PROMOTER-IN-VERTICAL-PIPES-AN-EXPERIMENTAL-INVESTIGATION.pdf
NLM
Coelho NM de A, Souza NMO, Andreolli I, Paiva JL de, Moraes Júnior D. Feasibility of using a hydrocyclone as a core annilar flow promoter in vertical pipes: an experimental investigation [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: https://www.researchgate.net/profile/Nelize-Coelho/publication/315793771_FEASIBILITY_OF_USING_A_HYDROCYCLONE_AS_A_CORE_ANNULAR_FLOW_PROMOTER_IN_VERTICAL_PIPES_AN_EXPERIMENTAL_INVESTIGATION/links/58e57c0faca2727858c92217/FEASIBILITY-OF-USING-A-HYDROCYCLONE-AS-A-CORE-ANNULAR-FLOW-PROMOTER-IN-VERTICAL-PIPES-AN-EXPERIMENTAL-INVESTIGATION.pdf
Vancouver
Coelho NM de A, Souza NMO, Andreolli I, Paiva JL de, Moraes Júnior D. Feasibility of using a hydrocyclone as a core annilar flow promoter in vertical pipes: an experimental investigation [Internet]. 2017 ;[citado 2024 maio 31 ] Available from: https://www.researchgate.net/profile/Nelize-Coelho/publication/315793771_FEASIBILITY_OF_USING_A_HYDROCYCLONE_AS_A_CORE_ANNULAR_FLOW_PROMOTER_IN_VERTICAL_PIPES_AN_EXPERIMENTAL_INVESTIGATION/links/58e57c0faca2727858c92217/FEASIBILITY-OF-USING-A-HYDROCYCLONE-AS-A-CORE-ANNULAR-FLOW-PROMOTER-IN-VERTICAL-PIPES-AN-EXPERIMENTAL-INVESTIGATION.pdf

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Subjects

Funding Agencies

Non normalized affiliation

Countries of institutions of collaboration