ReP USP - Resultado da busca

Trabalho de evento
Physical modelling of single-helix piles in sand using calibration chamber tests (2020)
Silva, Diego Moreira da; Tsuha, Cristina de Hollanda Cavalcanti
Source: Proceedings. Conference titles: European Conference on Physical Modelling in Geotechnics - ECPMG. Unidade: EESC
Subjects: ESTACAS HÉLICE CONTÍNUA E ÔMEGA, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Diego Moreira da e TSUHA, Cristina de Hollanda Cavalcanti. Physical modelling of single-helix piles in sand using calibration chamber tests. 2020, Anais.. Lulea, Sweden: Lulea University of Technology, 2020. Disponível em: https://repositorio.usp.br/directbitstream/063568c8-a45d-4c6d-b751-62d141fa2c16/trabalho%2001%20-%20Physical%20modelling%20of%20single-helix%20piles%20in%20sand%20using%20calibration%20chamber%20tests%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf. Acesso em: 13 jun. 2024.
APA
Silva, D. M. da, & Tsuha, C. de H. C. (2020). Physical modelling of single-helix piles in sand using calibration chamber tests. In Proceedings. Lulea, Sweden: Lulea University of Technology. Recuperado de https://repositorio.usp.br/directbitstream/063568c8-a45d-4c6d-b751-62d141fa2c16/trabalho%2001%20-%20Physical%20modelling%20of%20single-helix%20piles%20in%20sand%20using%20calibration%20chamber%20tests%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
NLM
Silva DM da, Tsuha C de HC. Physical modelling of single-helix piles in sand using calibration chamber tests [Internet]. Proceedings. 2020 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/063568c8-a45d-4c6d-b751-62d141fa2c16/trabalho%2001%20-%20Physical%20modelling%20of%20single-helix%20piles%20in%20sand%20using%20calibration%20chamber%20tests%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
Vancouver
Silva DM da, Tsuha C de HC. Physical modelling of single-helix piles in sand using calibration chamber tests [Internet]. Proceedings. 2020 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/063568c8-a45d-4c6d-b751-62d141fa2c16/trabalho%2001%20-%20Physical%20modelling%20of%20single-helix%20piles%20in%20sand%20using%20calibration%20chamber%20tests%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
Trabalho de evento
Study on the installation effect of helical piles in very dense sand (2020)
Schiavon, José Antonio; Tsuha, Cristina de Hollanda Cavalcanti ; Thorel, Luc
Source: Proceedings. Conference titles: European Conference on Physical Modelling in Geotechnics - ECPMG. Unidade: EESC
Subjects: ESTACAS, AREIA, PERFURAÇÃO, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHIAVON, José Antonio e TSUHA, Cristina de Hollanda Cavalcanti e THOREL, Luc. Study on the installation effect of helical piles in very dense sand. 2020, Anais.. Lulea, Sweden: Lulea University of Technology, 2020. Disponível em: https://repositorio.usp.br/directbitstream/bf891d02-8e0b-4c59-ad41-c4a6bec66104/trabalho%2002%20-%20Study%20on%20the%20installation%20effect%20of%20helical%20piles%20in%20very%20dense%20sand%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf. Acesso em: 13 jun. 2024.
APA
Schiavon, J. A., Tsuha, C. de H. C., & Thorel, L. (2020). Study on the installation effect of helical piles in very dense sand. In Proceedings. Lulea, Sweden: Lulea University of Technology. Recuperado de https://repositorio.usp.br/directbitstream/bf891d02-8e0b-4c59-ad41-c4a6bec66104/trabalho%2002%20-%20Study%20on%20the%20installation%20effect%20of%20helical%20piles%20in%20very%20dense%20sand%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
NLM
Schiavon JA, Tsuha C de HC, Thorel L. Study on the installation effect of helical piles in very dense sand [Internet]. Proceedings. 2020 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/bf891d02-8e0b-4c59-ad41-c4a6bec66104/trabalho%2002%20-%20Study%20on%20the%20installation%20effect%20of%20helical%20piles%20in%20very%20dense%20sand%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
Vancouver
Schiavon JA, Tsuha C de HC, Thorel L. Study on the installation effect of helical piles in very dense sand [Internet]. Proceedings. 2020 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/bf891d02-8e0b-4c59-ad41-c4a6bec66104/trabalho%2002%20-%20Study%20on%20the%20installation%20effect%20of%20helical%20piles%20in%20very%20dense%20sand%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
Artigo de periodico
On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS (2018)
Guimaraes, Mônica Costa Rodrigues; Castilho, Bruno César Noronha Marques de; Nossa, Tamires de Souza; Avila, Pedro Renato Tavares; Cucatti, Silvia; Alvarez, Fernando; Garcia, Jose Luis; Pinto, Haroldo Cavalcanti
Source: Surface & Coating Technology. Unidade: EESC
Subjects: TENSÃO RESIDUAL, CORROSÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUIMARAES, Mônica Costa Rodrigues et al. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS. Surface & Coating Technology, v. 340, p. 112-120, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2018.02.028. Acesso em: 13 jun. 2024.
APA
Guimaraes, M. C. R., Castilho, B. C. N. M. de, Nossa, T. de S., Avila, P. R. T., Cucatti, S., Alvarez, F., et al. (2018). On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS. Surface & Coating Technology, 340, 112-120. doi:10.1016/j.surfcoat.2018.02.028
NLM
Guimaraes MCR, Castilho BCNM de, Nossa T de S, Avila PRT, Cucatti S, Alvarez F, Garcia JL, Pinto HC. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS [Internet]. Surface & Coating Technology. 2018 ; 340 112-120.[citado 2024 jun. 13 ] Available from: https://doi.org/10.1016/j.surfcoat.2018.02.028
Vancouver
Guimaraes MCR, Castilho BCNM de, Nossa T de S, Avila PRT, Cucatti S, Alvarez F, Garcia JL, Pinto HC. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS [Internet]. Surface & Coating Technology. 2018 ; 340 112-120.[citado 2024 jun. 13 ] Available from: https://doi.org/10.1016/j.surfcoat.2018.02.028
Trabalho de evento
Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design (2016)
Bravo Mosquera, Pedro David; Abdalla, Alvaro Martins ; Cerón Muñoz, Hernán Darío ; Catalano, Fernando Martini
Conference titles: Aerospace Technology Congress. Unidade: EESC
Subjects: PROJETO DE AERONAVES, AERODINÂMICA DE AERONAVES, AERONAVES MILITARES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRAVO MOSQUERA, Pedro David et al. Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design. 2016, Anais.. Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics, 2016. . Acesso em: 13 jun. 2024.
APA
Bravo Mosquera, P. D., Abdalla, A. M., Cerón Muñoz, H. D., & Catalano, F. M. (2016). Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design. In . Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics.
NLM
Bravo Mosquera PD, Abdalla AM, Cerón Muñoz HD, Catalano FM. Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design. 2016 ;[citado 2024 jun. 13 ]
Vancouver
Bravo Mosquera PD, Abdalla AM, Cerón Muñoz HD, Catalano FM. Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design. 2016 ;[citado 2024 jun. 13 ]
Trabalho de evento
Road safety performance in Brazil: towards a composite indicator (2016)
Bastos, Jorge Tiago; Shen, Yongjun; Hermans, Elke; Brijs, Tom; Wets, Geert; Ferraz, Antônio Clóvis Pinto
Source: Proceedings. Conference titles: International Conference Road Safety On Five Continents -RS5C 2016. Unidade: EESC
Subjects: SEGURANÇA RODOVIÁRIA, SEGURANÇA DE TRÁFEGO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BASTOS, Jorge Tiago et al. Road safety performance in Brazil: towards a composite indicator. 2016, Anais.. Linköping: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2016. Disponível em: https://repositorio.usp.br/directbitstream/cb1ef6fa-1e5c-4f46-acaf-82bf18cbfb4e/sysno3155233%5BTrab%20ev%5D%20Bastos_Road%20safety%20performance%20in%20Brazil%20%281%29.pdf. Acesso em: 13 jun. 2024.
APA
Bastos, J. T., Shen, Y., Hermans, E., Brijs, T., Wets, G., & Ferraz, A. C. P. (2016). Road safety performance in Brazil: towards a composite indicator. In Proceedings. Linköping: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/cb1ef6fa-1e5c-4f46-acaf-82bf18cbfb4e/sysno3155233%5BTrab%20ev%5D%20Bastos_Road%20safety%20performance%20in%20Brazil%20%281%29.pdf
NLM
Bastos JT, Shen Y, Hermans E, Brijs T, Wets G, Ferraz ACP. Road safety performance in Brazil: towards a composite indicator [Internet]. Proceedings. 2016 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/cb1ef6fa-1e5c-4f46-acaf-82bf18cbfb4e/sysno3155233%5BTrab%20ev%5D%20Bastos_Road%20safety%20performance%20in%20Brazil%20%281%29.pdf
Vancouver
Bastos JT, Shen Y, Hermans E, Brijs T, Wets G, Ferraz ACP. Road safety performance in Brazil: towards a composite indicator [Internet]. Proceedings. 2016 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/cb1ef6fa-1e5c-4f46-acaf-82bf18cbfb4e/sysno3155233%5BTrab%20ev%5D%20Bastos_Road%20safety%20performance%20in%20Brazil%20%281%29.pdf
Trabalho de evento
Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences (2016)
Catalano, Fernando Martini ; Abdalla, Alvaro Martins ; Cerón Muñoz, Hernán Darío ; Munjulury, Raghu Chaitanya
Conference titles: Aerospace Technology Congress. Unidade: EESC
Subjects: TÚNEIS DE VENTO, AERODINÂMICA DE AERONAVES, ASAS DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CATALANO, Fernando Martini et al. Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences. 2016, Anais.. Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics, 2016. . Acesso em: 13 jun. 2024.
APA
Catalano, F. M., Abdalla, A. M., Cerón Muñoz, H. D., & Munjulury, R. C. (2016). Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences. In . Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics.
NLM
Catalano FM, Abdalla AM, Cerón Muñoz HD, Munjulury RC. Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences. 2016 ;[citado 2024 jun. 13 ]
Vancouver
Catalano FM, Abdalla AM, Cerón Muñoz HD, Munjulury RC. Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences. 2016 ;[citado 2024 jun. 13 ]
Trabalho de evento
Analysis of radar cross section and wave drag reduction of fighter aircraft (2016)
Barbosa, Uandha Fernandes; Costa, João Paulo Monteiro Cruvinel da; Munjulury, Raghu Chaitanya; Abdalla, Alvaro Martins
Conference titles: Aerospace Technology Congress. Unidade: EESC
Subjects: AERONAVES MILITARES, AERODINÂMICA DE AERONAVES, AERONAVES SUPERSÔNICAS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Uandha Fernandes et al. Analysis of radar cross section and wave drag reduction of fighter aircraft. 2016, Anais.. Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics, 2016. . Acesso em: 13 jun. 2024.
APA
Barbosa, U. F., Costa, J. P. M. C. da, Munjulury, R. C., & Abdalla, A. M. (2016). Analysis of radar cross section and wave drag reduction of fighter aircraft. In . Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics.
NLM
Barbosa UF, Costa JPMC da, Munjulury RC, Abdalla AM. Analysis of radar cross section and wave drag reduction of fighter aircraft. 2016 ;[citado 2024 jun. 13 ]
Vancouver
Barbosa UF, Costa JPMC da, Munjulury RC, Abdalla AM. Analysis of radar cross section and wave drag reduction of fighter aircraft. 2016 ;[citado 2024 jun. 13 ]
Artigo de periodico
Wear and corrosion of niobium carbide coated AISI 52100 bearing steel (2015)
Fernandes, F. A. P; Gallego, J; Picon, Carlos Alberto; Tremiliosi Filho, Germano ; Casteletti, Luíz Carlos
Source: Surface & Coating Technology. Unidades: IQSC, EESC
Assunto: CORROSÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, F. A. P et al. Wear and corrosion of niobium carbide coated AISI 52100 bearing steel. Surface & Coating Technology, v. 279, p. 112-117, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2015.08.036. Acesso em: 13 jun. 2024.
APA
Fernandes, F. A. P., Gallego, J., Picon, C. A., Tremiliosi Filho, G., & Casteletti, L. C. (2015). Wear and corrosion of niobium carbide coated AISI 52100 bearing steel. Surface & Coating Technology, 279, 112-117. doi:10.1016/j.surfcoat.2015.08.036
NLM
Fernandes FAP, Gallego J, Picon CA, Tremiliosi Filho G, Casteletti LC. Wear and corrosion of niobium carbide coated AISI 52100 bearing steel [Internet]. Surface & Coating Technology. 2015 ; 279 112-117.[citado 2024 jun. 13 ] Available from: https://doi.org/10.1016/j.surfcoat.2015.08.036
Vancouver
Fernandes FAP, Gallego J, Picon CA, Tremiliosi Filho G, Casteletti LC. Wear and corrosion of niobium carbide coated AISI 52100 bearing steel [Internet]. Surface & Coating Technology. 2015 ; 279 112-117.[citado 2024 jun. 13 ] Available from: https://doi.org/10.1016/j.surfcoat.2015.08.036
Trabalho de evento
Integration of strategic planning and life cycle management: a discussion based on a literature review (2013)
Puglieri, Fabio Neves; Iritani, Diego Rodrigues ; Ometto, Aldo Roberto
Source: Proceedings of the 6th International Conference on Life Cycle Management. Conference titles: International Conference on Life Cycle Management. Unidade: EESC
Subjects: PLANEJAMENTO ESTRATÉGICO, REVISÃO SISTEMÁTICA, ENGENHARIA DE PRODUÇÃO, CICLO DE VIDA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PUGLIERI, Fabio Neves e IRITANI, Diego Rodrigues e OMETTO, Aldo Roberto. Integration of strategic planning and life cycle management: a discussion based on a literature review. 2013, Anais.. Gothenburg, Sweden: Chalmers University of Technology, 2013. Disponível em: https://repositorio.usp.br/directbitstream/01550386-baf4-4321-b750-8caf2b86545f/ArtigoLCM2013_removed.pdf. Acesso em: 13 jun. 2024.
APA
Puglieri, F. N., Iritani, D. R., & Ometto, A. R. (2013). Integration of strategic planning and life cycle management: a discussion based on a literature review. In Proceedings of the 6th International Conference on Life Cycle Management. Gothenburg, Sweden: Chalmers University of Technology. Recuperado de https://repositorio.usp.br/directbitstream/01550386-baf4-4321-b750-8caf2b86545f/ArtigoLCM2013_removed.pdf
NLM
Puglieri FN, Iritani DR, Ometto AR. Integration of strategic planning and life cycle management: a discussion based on a literature review [Internet]. Proceedings of the 6th International Conference on Life Cycle Management. 2013 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/01550386-baf4-4321-b750-8caf2b86545f/ArtigoLCM2013_removed.pdf
Vancouver
Puglieri FN, Iritani DR, Ometto AR. Integration of strategic planning and life cycle management: a discussion based on a literature review [Internet]. Proceedings of the 6th International Conference on Life Cycle Management. 2013 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/01550386-baf4-4321-b750-8caf2b86545f/ArtigoLCM2013_removed.pdf
Trabalho de evento
Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system (2013)
Bueno, Cristiane; Rossignolo, João Adriano; Ometto, Aldo Roberto
Source: Proceedings of the 6th International Conference on Life Cycle Management. Conference titles: International Conference on Life Cycle Management. Unidades: FZEA, EESC
Subjects: CONSTRUÇÃO CIVIL (ASPECTOS AMBIENTAIS), EDIFÍCIOS SUSTENTÁVEIS (CERTIFICAÇÃO), MATERIAIS DE CONSTRUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BUENO, Cristiane e ROSSIGNOLO, João Adriano e OMETTO, Aldo Roberto. Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system. 2013, Anais.. Gothenburg, Sweden: Chalmers University of Technology, 2013. Disponível em: http://conferences.chalmers.se/index.php/LCM/LCM2013/paper/view/584/185. Acesso em: 13 jun. 2024.
APA
Bueno, C., Rossignolo, J. A., & Ometto, A. R. (2013). Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system. In Proceedings of the 6th International Conference on Life Cycle Management. Gothenburg, Sweden: Chalmers University of Technology. Recuperado de http://conferences.chalmers.se/index.php/LCM/LCM2013/paper/view/584/185
NLM
Bueno C, Rossignolo JA, Ometto AR. Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system [Internet]. Proceedings of the 6th International Conference on Life Cycle Management. 2013 ;[citado 2024 jun. 13 ] Available from: http://conferences.chalmers.se/index.php/LCM/LCM2013/paper/view/584/185
Vancouver
Bueno C, Rossignolo JA, Ometto AR. Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system [Internet]. Proceedings of the 6th International Conference on Life Cycle Management. 2013 ;[citado 2024 jun. 13 ] Available from: http://conferences.chalmers.se/index.php/LCM/LCM2013/paper/view/584/185
Trabalho de evento
Study of Influence of Barriers on Visibility of Two-Way Highways (2013)
Matos, Érica Santos; Larocca, Ana Paula Camargo ; Kabbach Júnior, Felipe Issa
Source: Proceedings. Conference titles: International Conference Road Safety on Four Continents. Unidades: EESC, EP
Subjects: SEGURANÇA RODOVIÁRIA, SEGURANÇA VEICULAR, INFRAESTRUTURA DE TRANSPORTES, RODOVIAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MATOS, Érica Santos e LAROCCA, Ana Paula Camargo e KABBACH JÚNIOR, Felipe Issa. Study of Influence of Barriers on Visibility of Two-Way Highways. 2013, Anais.. Linköping: Statens väg-och transportforskningsinstitut, 2013. Disponível em: http://vti.diva-portal.org/smash/get/diva2:761308/FULLTEXT01.pdf. Acesso em: 13 jun. 2024.
APA
Matos, É. S., Larocca, A. P. C., & Kabbach Júnior, F. I. (2013). Study of Influence of Barriers on Visibility of Two-Way Highways. In Proceedings. Linköping: Statens väg-och transportforskningsinstitut. Recuperado de http://vti.diva-portal.org/smash/get/diva2:761308/FULLTEXT01.pdf
NLM
Matos ÉS, Larocca APC, Kabbach Júnior FI. Study of Influence of Barriers on Visibility of Two-Way Highways [Internet]. Proceedings. 2013 ;[citado 2024 jun. 13 ] Available from: http://vti.diva-portal.org/smash/get/diva2:761308/FULLTEXT01.pdf
Vancouver
Matos ÉS, Larocca APC, Kabbach Júnior FI. Study of Influence of Barriers on Visibility of Two-Way Highways [Internet]. Proceedings. 2013 ;[citado 2024 jun. 13 ] Available from: http://vti.diva-portal.org/smash/get/diva2:761308/FULLTEXT01.pdf
Trabalho de evento-anais periodico
Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes (2013)
Cucatti, Silvia Azevedo dos Santos; Ochoa, E.; Garcia, J; Pinto, Haroldo Cavalcanti ; Morales, M; Droppa Jr, R; Zagonel, Luiz Fernando; Wisnivesky, D; Alvarez, F
Source: Proceedings. Conference titles: International Conference on Plasma Surface Engineering - PSE 2012. Unidade: EESC
Subjects: RADIAÇÃO SINCROTRON, TENSÃO RESIDUAL, REVESTIMENTOS, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CUCATTI, Silvia Azevedo dos Santos et al. Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes. Proceedings. Linköping: LiU Electronic Press. Disponível em: https://repositorio.usp.br/directbitstream/38d50520-44dd-46d2-91f0-d28fc3419c6e/sysno3004920_trabalho%20em%20congresso%2010.pdf. Acesso em: 13 jun. 2024. , 2013
APA
Cucatti, S. A. dos S., Ochoa, E., Garcia, J., Pinto, H. C., Morales, M., Droppa Jr, R., et al. (2013). Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes. Proceedings. Linköping: LiU Electronic Press. Recuperado de https://repositorio.usp.br/directbitstream/38d50520-44dd-46d2-91f0-d28fc3419c6e/sysno3004920_trabalho%20em%20congresso%2010.pdf
NLM
Cucatti SA dos S, Ochoa E, Garcia J, Pinto HC, Morales M, Droppa Jr R, Zagonel LF, Wisnivesky D, Alvarez F. Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes [Internet]. Proceedings. 2013 ;( 2): 92-95.[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/38d50520-44dd-46d2-91f0-d28fc3419c6e/sysno3004920_trabalho%20em%20congresso%2010.pdf
Vancouver
Cucatti SA dos S, Ochoa E, Garcia J, Pinto HC, Morales M, Droppa Jr R, Zagonel LF, Wisnivesky D, Alvarez F. Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes [Internet]. Proceedings. 2013 ;( 2): 92-95.[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/38d50520-44dd-46d2-91f0-d28fc3419c6e/sysno3004920_trabalho%20em%20congresso%2010.pdf
Trabalho de evento-anais periodico
Effects of ion-beam bombardment on the physical properties of 100Cr6 steel (2013)
Droppa Jr, R.; Pinto, Haroldo Cavalcanti ; Garcia, J; Ochoa, E.; Morales, M; Cucatti, S; Alvarez, F
Source: Proceedings. Conference titles: International Conference on Plasma Surface Engineering - PSE 2012. Unidade: EESC
Subjects: TENSÃO RESIDUAL, DESGASTE DOS MATERIAIS, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DROPPA JR, R. et al. Effects of ion-beam bombardment on the physical properties of 100Cr6 steel. Proceedings. Linköping: LiU Electronic Press. Disponível em: https://repositorio.usp.br/directbitstream/ba031f53-b93b-4858-be60-bc85ad2d7ad5/sysno3004919_trabalho%20em%20congresso%209.pdf. Acesso em: 13 jun. 2024. , 2013
APA
Droppa Jr, R., Pinto, H. C., Garcia, J., Ochoa, E., Morales, M., Cucatti, S., & Alvarez, F. (2013). Effects of ion-beam bombardment on the physical properties of 100Cr6 steel. Proceedings. Linköping: LiU Electronic Press. Recuperado de https://repositorio.usp.br/directbitstream/ba031f53-b93b-4858-be60-bc85ad2d7ad5/sysno3004919_trabalho%20em%20congresso%209.pdf
NLM
Droppa Jr R, Pinto HC, Garcia J, Ochoa E, Morales M, Cucatti S, Alvarez F. Effects of ion-beam bombardment on the physical properties of 100Cr6 steel [Internet]. Proceedings. 2013 ;( 2): 338-341.[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/ba031f53-b93b-4858-be60-bc85ad2d7ad5/sysno3004919_trabalho%20em%20congresso%209.pdf
Vancouver
Droppa Jr R, Pinto HC, Garcia J, Ochoa E, Morales M, Cucatti S, Alvarez F. Effects of ion-beam bombardment on the physical properties of 100Cr6 steel [Internet]. Proceedings. 2013 ;( 2): 338-341.[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/ba031f53-b93b-4858-be60-bc85ad2d7ad5/sysno3004919_trabalho%20em%20congresso%209.pdf
Trabalho de evento
Evaluation of eplication performance in the nanometer range by hot molding of Diffractive Optical Elements (2012)
Granado, R. M.; Cirino, G. A.; Duduch, Jaime Gilberto; Jasinevicius, Renato Goulart
Source: Proceedings. Conference titles: Euspen International Conference. Unidade: EESC
Subjects: DISPOSITIVOS ÓPTICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GRANADO, R. M. et al. Evaluation of eplication performance in the nanometer range by hot molding of Diffractive Optical Elements. 2012, Anais.. Stockholm, Sweden: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2012. Disponível em: https://repositorio.usp.br/directbitstream/a5c81581-f980-421c-8851-b9ae89d55d89/OK___trabalho%2014%20-%20Evaluation%20of%20eplication%20performance%20in%20the%20nanometer%20range%20by%20hot%20molding%20of%20Diffractive%20Optical%20Elements.%20%2812th%20euspen%20International%20Con%29%20%281%29.pdf. Acesso em: 13 jun. 2024.
APA
Granado, R. M., Cirino, G. A., Duduch, J. G., & Jasinevicius, R. G. (2012). Evaluation of eplication performance in the nanometer range by hot molding of Diffractive Optical Elements. In Proceedings. Stockholm, Sweden: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/a5c81581-f980-421c-8851-b9ae89d55d89/OK___trabalho%2014%20-%20Evaluation%20of%20eplication%20performance%20in%20the%20nanometer%20range%20by%20hot%20molding%20of%20Diffractive%20Optical%20Elements.%20%2812th%20euspen%20International%20Con%29%20%281%29.pdf
NLM
Granado RM, Cirino GA, Duduch JG, Jasinevicius RG. Evaluation of eplication performance in the nanometer range by hot molding of Diffractive Optical Elements [Internet]. Proceedings. 2012 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/a5c81581-f980-421c-8851-b9ae89d55d89/OK___trabalho%2014%20-%20Evaluation%20of%20eplication%20performance%20in%20the%20nanometer%20range%20by%20hot%20molding%20of%20Diffractive%20Optical%20Elements.%20%2812th%20euspen%20International%20Con%29%20%281%29.pdf
Vancouver
Granado RM, Cirino GA, Duduch JG, Jasinevicius RG. Evaluation of eplication performance in the nanometer range by hot molding of Diffractive Optical Elements [Internet]. Proceedings. 2012 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/a5c81581-f980-421c-8851-b9ae89d55d89/OK___trabalho%2014%20-%20Evaluation%20of%20eplication%20performance%20in%20the%20nanometer%20range%20by%20hot%20molding%20of%20Diffractive%20Optical%20Elements.%20%2812th%20euspen%20International%20Con%29%20%281%29.pdf
Parte de monografia/livro
Image recognition and interferometry applied to high performance positioning systems (2012)
Montanari, Luciana; Porto, Arthur José Vieira; Duduch, Jaime Gilberto
Source: Proceedings. Conference titles: Euspen International Conference. Unidade: EESC
Subjects: RECONHECIMENTO DE IMAGEM, REDES NEURAIS, INTERFEROMETRIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MONTANARI, Luciana e PORTO, Arthur José Vieira e DUDUCH, Jaime Gilberto. Image recognition and interferometry applied to high performance positioning systems. Proceedings. Tradução . Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2012. . Disponível em: https://repositorio.usp.br/directbitstream/a451d401-b435-4ccd-8b0b-d9da126152c0/prod_022662_sysno_3002580.pdf. Acesso em: 13 jun. 2024.
APA
Montanari, L., Porto, A. J. V., & Duduch, J. G. (2012). Image recognition and interferometry applied to high performance positioning systems. In Proceedings. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/a451d401-b435-4ccd-8b0b-d9da126152c0/prod_022662_sysno_3002580.pdf
NLM
Montanari L, Porto AJV, Duduch JG. Image recognition and interferometry applied to high performance positioning systems [Internet]. In: Proceedings. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2012. [citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/a451d401-b435-4ccd-8b0b-d9da126152c0/prod_022662_sysno_3002580.pdf
Vancouver
Montanari L, Porto AJV, Duduch JG. Image recognition and interferometry applied to high performance positioning systems [Internet]. In: Proceedings. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2012. [citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/a451d401-b435-4ccd-8b0b-d9da126152c0/prod_022662_sysno_3002580.pdf
Trabalho de evento
Metrology applied to microfabrication (2012)
Duduch, Jaime Gilberto; Vieira, A. D.; Jasinevicius, Renato Goulart
Source: Proceedings. Conference titles: Euspen International Conference. Unidade: EESC
Subjects: METROLOGIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DUDUCH, Jaime Gilberto e VIEIRA, A. D. e JASINEVICIUS, Renato Goulart. Metrology applied to microfabrication. 2012, Anais.. Stockholm, Sweden: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2012. Disponível em: https://repositorio.usp.br/directbitstream/4e54d810-c64a-4261-a613-dbfae2768cf3/OK___trabalho%2015%20-%20Metrology%20applied%20to%20microfabrication.%20%2812th%20euspen%20International%20Conference%2C%202012%29.pdf. Acesso em: 13 jun. 2024.
APA
Duduch, J. G., Vieira, A. D., & Jasinevicius, R. G. (2012). Metrology applied to microfabrication. In Proceedings. Stockholm, Sweden: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/4e54d810-c64a-4261-a613-dbfae2768cf3/OK___trabalho%2015%20-%20Metrology%20applied%20to%20microfabrication.%20%2812th%20euspen%20International%20Conference%2C%202012%29.pdf
NLM
Duduch JG, Vieira AD, Jasinevicius RG. Metrology applied to microfabrication [Internet]. Proceedings. 2012 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/4e54d810-c64a-4261-a613-dbfae2768cf3/OK___trabalho%2015%20-%20Metrology%20applied%20to%20microfabrication.%20%2812th%20euspen%20International%20Conference%2C%202012%29.pdf
Vancouver
Duduch JG, Vieira AD, Jasinevicius RG. Metrology applied to microfabrication [Internet]. Proceedings. 2012 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/4e54d810-c64a-4261-a613-dbfae2768cf3/OK___trabalho%2015%20-%20Metrology%20applied%20to%20microfabrication.%20%2812th%20euspen%20International%20Conference%2C%202012%29.pdf
Trabalho de evento
Effect of tool edge radius on the microscale milling of ultrafine-grained steels at high-performance machining (2012)
Assis, Cleiton Lazaro Fazolo de; Rigatti, Aldo Marcel Yoshida; Jasinevicius, Renato Goulart; Rodrigues, Alessandro Roger; Coelho, Reginaldo Teixeira
Source: Proceedings. Conference titles: Euspen International Conference. Unidade: EESC
Subjects: CORTE, USINAGEM, FERRAMENTAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSIS, Cleiton Lazaro Fazolo de et al. Effect of tool edge radius on the microscale milling of ultrafine-grained steels at high-performance machining. 2012, Anais.. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2012. Disponível em: http://www.researchgate.net/publication/234023485_Effect_of_tool_edge_radius_on_the_microscale_milling_of_ultrafine-grained_steels_at_high-performance_machining. Acesso em: 13 jun. 2024.
APA
Assis, C. L. F. de, Rigatti, A. M. Y., Jasinevicius, R. G., Rodrigues, A. R., & Coelho, R. T. (2012). Effect of tool edge radius on the microscale milling of ultrafine-grained steels at high-performance machining. In Proceedings. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de http://www.researchgate.net/publication/234023485_Effect_of_tool_edge_radius_on_the_microscale_milling_of_ultrafine-grained_steels_at_high-performance_machining
NLM
Assis CLF de, Rigatti AMY, Jasinevicius RG, Rodrigues AR, Coelho RT. Effect of tool edge radius on the microscale milling of ultrafine-grained steels at high-performance machining [Internet]. Proceedings. 2012 ;[citado 2024 jun. 13 ] Available from: http://www.researchgate.net/publication/234023485_Effect_of_tool_edge_radius_on_the_microscale_milling_of_ultrafine-grained_steels_at_high-performance_machining
Vancouver
Assis CLF de, Rigatti AMY, Jasinevicius RG, Rodrigues AR, Coelho RT. Effect of tool edge radius on the microscale milling of ultrafine-grained steels at high-performance machining [Internet]. Proceedings. 2012 ;[citado 2024 jun. 13 ] Available from: http://www.researchgate.net/publication/234023485_Effect_of_tool_edge_radius_on_the_microscale_milling_of_ultrafine-grained_steels_at_high-performance_machining
Trabalho de evento
Micromachining of sinusoidal microstructure surface in monocrystalline InSb (2012)
Dib, Marcel Henrique Militão; Silva, M. A. P.; Jasinevicius, Renato Goulart
Source: Proceedings. Conference titles: Euspen International Conference. Unidade: EESC
Subjects: USINAGEM, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIB, Marcel Henrique Militão e SILVA, M. A. P. e JASINEVICIUS, Renato Goulart. Micromachining of sinusoidal microstructure surface in monocrystalline InSb. 2012, Anais.. Stockholm, Sweden: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2012. Disponível em: https://repositorio.usp.br/directbitstream/6b74ac26-c9f4-4471-bf85-dd115b1bfad5/OK___trabalho%2031%20-%20Micromachining%20of%20sinusoidal%20microstructure%20surface%20in%20monocrystalline%20InSb%20%28euspen%202012%29.pdf. Acesso em: 13 jun. 2024.
APA
Dib, M. H. M., Silva, M. A. P., & Jasinevicius, R. G. (2012). Micromachining of sinusoidal microstructure surface in monocrystalline InSb. In Proceedings. Stockholm, Sweden: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/6b74ac26-c9f4-4471-bf85-dd115b1bfad5/OK___trabalho%2031%20-%20Micromachining%20of%20sinusoidal%20microstructure%20surface%20in%20monocrystalline%20InSb%20%28euspen%202012%29.pdf
NLM
Dib MHM, Silva MAP, Jasinevicius RG. Micromachining of sinusoidal microstructure surface in monocrystalline InSb [Internet]. Proceedings. 2012 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/6b74ac26-c9f4-4471-bf85-dd115b1bfad5/OK___trabalho%2031%20-%20Micromachining%20of%20sinusoidal%20microstructure%20surface%20in%20monocrystalline%20InSb%20%28euspen%202012%29.pdf
Vancouver
Dib MHM, Silva MAP, Jasinevicius RG. Micromachining of sinusoidal microstructure surface in monocrystalline InSb [Internet]. Proceedings. 2012 ;[citado 2024 jun. 13 ] Available from: https://repositorio.usp.br/directbitstream/6b74ac26-c9f4-4471-bf85-dd115b1bfad5/OK___trabalho%2031%20-%20Micromachining%20of%20sinusoidal%20microstructure%20surface%20in%20monocrystalline%20InSb%20%28euspen%202012%29.pdf
Trabalho de evento
Highway capacity research in Brazil (2011)
Setti, José Reynaldo Anselmo
Conference titles: International Symposium on Highway Capacity and Quality of Service. Unidade: EESC
Assunto: RODOVIAS (CAPACIDADE)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SETTI, José Reynaldo Anselmo. Highway capacity research in Brazil. 2011, Anais.. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2011. . Acesso em: 13 jun. 2024.
APA
Setti, J. R. A. (2011). Highway capacity research in Brazil. In . Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Setti JRA. Highway capacity research in Brazil. 2011 ;[citado 2024 jun. 13 ]
Vancouver
Setti JRA. Highway capacity research in Brazil. 2011 ;[citado 2024 jun. 13 ]
Trabalho de evento
Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems (2011)
Medrano Castillo, Madeleine Rocio; London Junior, Joao Bosco Augusto; Bretas, Newton Geraldo; Lefebvre, Serge; Prévost, Jacques; Lambert, Bertrand
Conference titles: Power Systems Computation Conference - PSCC. Unidade: EESC
Assunto: SISTEMAS ELÉTRICOS DE POTÊNCIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDRANO CASTILLO, Madeleine Rocio et al. Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems. 2011, Anais.. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2011. . Acesso em: 13 jun. 2024.
APA
Medrano Castillo, M. R., London Junior, J. B. A., Bretas, N. G., Lefebvre, S., Prévost, J., & Lambert, B. (2011). Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems. In . Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Medrano Castillo MR, London Junior JBA, Bretas NG, Lefebvre S, Prévost J, Lambert B. Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems. 2011 ;[citado 2024 jun. 13 ]
Vancouver
Medrano Castillo MR, London Junior JBA, Bretas NG, Lefebvre S, Prévost J, Lambert B. Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems. 2011 ;[citado 2024 jun. 13 ]

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Funding Agencies

Indexado em

Non normalized affiliation