ReP USP - Resultado da busca

Artigo de periodico
Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm (2023)
Moraes, Matheus Henrique Morato de ; Fraga, Iuri Fazolin; Menezes, Isabella Silva ; Lahr, Francisco Antonio Rocco ; Panzera, Túlio Hallak ; Freire, Rodrigo Teixeira Santos; Dias, Alfredo Manuel Pereira Geraldes ; Santos, Herisson Ferreira dos; Faustino, Emerson; Pereira Junior, Wanderlei Malaquias; Christoforo, André Luis
Fonte: Buildings. Unidade: EESC
Assuntos: TRELIÇAS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAES, Matheus Henrique Morato de et al. Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm. Buildings, v. 13, n. 8, p. 1-36, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13081946. Acesso em: 13 jul. 2024.
APA
Moraes, M. H. M. de, Fraga, I. F., Menezes, I. S., Lahr, F. A. R., Panzera, T. H., Freire, R. T. S., et al. (2023). Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm. Buildings, 13( 8), 1-36. doi:10.3390/buildings13081946
NLM
Moraes MHM de, Fraga IF, Menezes IS, Lahr FAR, Panzera TH, Freire RTS, Dias AMPG, Santos HF dos, Faustino E, Pereira Junior WM, Christoforo AL. Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm [Internet]. Buildings. 2023 ; 13( 8): 1-36.[citado 2024 jul. 13 ] Available from: https://doi.org/10.3390/buildings13081946
Vancouver
Moraes MHM de, Fraga IF, Menezes IS, Lahr FAR, Panzera TH, Freire RTS, Dias AMPG, Santos HF dos, Faustino E, Pereira Junior WM, Christoforo AL. Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm [Internet]. Buildings. 2023 ; 13( 8): 1-36.[citado 2024 jul. 13 ] Available from: https://doi.org/10.3390/buildings13081946
Artigo de periodico
Influence of opening type in axially compressed castellated columns (2023)
Gomes, Arthur Filipe Freire ; Mesquita, Leonardo C; Rodrigues, Edson Fernando Castanheira ; Arroyo, Felipe Nascimento ; Aquino, Vinicius Borges de Moura ; Santos, Herisson Ferreira dos; Panzera, Túlio Hallak ; Lahr, Francisco Antonio Rocco ; Chahud, Eduardo; Branco, Luis A. M. N.; Christoforo, André Luis
Fonte: Buildings. Unidade: EESC
Assuntos: MÉTODO DOS ELEMENTOS FINITOS, PILARES, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GOMES, Arthur Filipe Freire et al. Influence of opening type in axially compressed castellated columns. Buildings, v. 13, n. 7, p. 1-20, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13071851. Acesso em: 13 jul. 2024.
APA
Gomes, A. F. F., Mesquita, L. C., Rodrigues, E. F. C., Arroyo, F. N., Aquino, V. B. de M., Santos, H. F. dos, et al. (2023). Influence of opening type in axially compressed castellated columns. Buildings, 13( 7), 1-20. doi:10.3390/buildings13071851
NLM
Gomes AFF, Mesquita LC, Rodrigues EFC, Arroyo FN, Aquino VB de M, Santos HF dos, Panzera TH, Lahr FAR, Chahud E, Branco LAMN, Christoforo AL. Influence of opening type in axially compressed castellated columns [Internet]. Buildings. 2023 ; 13( 7): 1-20.[citado 2024 jul. 13 ] Available from: https://doi.org/10.3390/buildings13071851
Vancouver
Gomes AFF, Mesquita LC, Rodrigues EFC, Arroyo FN, Aquino VB de M, Santos HF dos, Panzera TH, Lahr FAR, Chahud E, Branco LAMN, Christoforo AL. Influence of opening type in axially compressed castellated columns [Internet]. Buildings. 2023 ; 13( 7): 1-20.[citado 2024 jul. 13 ] Available from: https://doi.org/10.3390/buildings13071851
Artigo de periodico
Thermal treatment of OSB panels: a systematic and bibliometric overview (2022)
Sugahara, Estefani Suana ; Arroyo, Felipe Nascimento ; Campos, Cristiane Inácio de ; Botelho, Edson Cocchieri ; Christoforo, André Luis ; Costa, Michelle Leali ; Lahr, Francisco Antonio Rocco
Fonte: European Journal of Wood and Wood Products. Unidade: EESC
Assuntos: PAINÉIS, BIBLIOMETRIA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SUGAHARA, Estefani Suana et al. Thermal treatment of OSB panels: a systematic and bibliometric overview. European Journal of Wood and Wood Products, p. 1-15, 2022Tradução . . Disponível em: https://doi.org/10.1007/s00107-022-01849-9. Acesso em: 13 jul. 2024.
APA
Sugahara, E. S., Arroyo, F. N., Campos, C. I. de, Botelho, E. C., Christoforo, A. L., Costa, M. L., & Lahr, F. A. R. (2022). Thermal treatment of OSB panels: a systematic and bibliometric overview. European Journal of Wood and Wood Products, 1-15. doi:10.1007/s00107-022-01849-9
NLM
Sugahara ES, Arroyo FN, Campos CI de, Botelho EC, Christoforo AL, Costa ML, Lahr FAR. Thermal treatment of OSB panels: a systematic and bibliometric overview [Internet]. European Journal of Wood and Wood Products. 2022 ; 1-15.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1007/s00107-022-01849-9
Vancouver
Sugahara ES, Arroyo FN, Campos CI de, Botelho EC, Christoforo AL, Costa ML, Lahr FAR. Thermal treatment of OSB panels: a systematic and bibliometric overview [Internet]. European Journal of Wood and Wood Products. 2022 ; 1-15.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1007/s00107-022-01849-9
Artigo de periodico
Is the timber construction sector prepared for e-commerce via Instagram®?: a perspective from Brazil (2022)
Araujo, Victor de; Švajlenka, Jozef; Vasconcelos, Juliano; Santos, Herisson; Serra, Sheyla; Almeida Filho, Fernando; Paliari, José; Lahr, Francisco Antonio Rocco ; Christoforo, André Luis
Fonte: Sustainability. Unidade: EESC
Assuntos: CASAS DE MADEIRA, PROMOÇÃO COMERCIAL, COMÉRCIO ELETRÔNICO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARAUJO, Victor de et al. Is the timber construction sector prepared for e-commerce via Instagram®?: a perspective from Brazil. Sustainability, v. 14, p. 1-15, 2022Tradução . . Disponível em: https://doi.org/10.3390/su14148683. Acesso em: 13 jul. 2024.
APA
Araujo, V. de, Švajlenka, J., Vasconcelos, J., Santos, H., Serra, S., Almeida Filho, F., et al. (2022). Is the timber construction sector prepared for e-commerce via Instagram®?: a perspective from Brazil. Sustainability, 14, 1-15. doi:10.3390/su14148683
NLM
Araujo V de, Švajlenka J, Vasconcelos J, Santos H, Serra S, Almeida Filho F, Paliari J, Lahr FAR, Christoforo AL. Is the timber construction sector prepared for e-commerce via Instagram®?: a perspective from Brazil [Internet]. Sustainability. 2022 ; 14 1-15.[citado 2024 jul. 13 ] Available from: https://doi.org/10.3390/su14148683
Vancouver
Araujo V de, Švajlenka J, Vasconcelos J, Santos H, Serra S, Almeida Filho F, Paliari J, Lahr FAR, Christoforo AL. Is the timber construction sector prepared for e-commerce via Instagram®?: a perspective from Brazil [Internet]. Sustainability. 2022 ; 14 1-15.[citado 2024 jul. 13 ] Available from: https://doi.org/10.3390/su14148683
Artigo de periodico
Residual mechanical properties and durability of high-strength concrete with polypropylene fibers in high temperatures (2022)
Resende, Heron Freitas; Reis, Elvys Dias; Arroyo, Felipe Nascimento; Moraes, Matheus Henrique Morato de; Santos, Herisson Ferreira dos; Silva, Enio Gomes da; Lahr, Francisco Antonio Rocco ; Chahud, Eduardo; Panzera, Túlio Hallak ; Christoforo, André Luis ; Branco, Luiz Antônio Melgaço Nunes
Fonte: Materials. Unidade: EESC
Assuntos: CONCRETO DE ALTA RESISTÊNCIA, ALTA TEMPERATURA, REGRESSÃO LINEAR, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RESENDE, Heron Freitas et al. Residual mechanical properties and durability of high-strength concrete with polypropylene fibers in high temperatures. Materials, v. 15, n. 13, p. 1-24, 2022Tradução . . Disponível em: https://doi.org/10.3390/ma15134711. Acesso em: 13 jul. 2024.
APA
Resende, H. F., Reis, E. D., Arroyo, F. N., Moraes, M. H. M. de, Santos, H. F. dos, Silva, E. G. da, et al. (2022). Residual mechanical properties and durability of high-strength concrete with polypropylene fibers in high temperatures. Materials, 15( 13), 1-24. doi:10.3390/ma15134711
NLM
Resende HF, Reis ED, Arroyo FN, Moraes MHM de, Santos HF dos, Silva EG da, Lahr FAR, Chahud E, Panzera TH, Christoforo AL, Branco LAMN. Residual mechanical properties and durability of high-strength concrete with polypropylene fibers in high temperatures [Internet]. Materials. 2022 ; 15( 13): 1-24.[citado 2024 jul. 13 ] Available from: https://doi.org/10.3390/ma15134711
Vancouver
Resende HF, Reis ED, Arroyo FN, Moraes MHM de, Santos HF dos, Silva EG da, Lahr FAR, Chahud E, Panzera TH, Christoforo AL, Branco LAMN. Residual mechanical properties and durability of high-strength concrete with polypropylene fibers in high temperatures [Internet]. Materials. 2022 ; 15( 13): 1-24.[citado 2024 jul. 13 ] Available from: https://doi.org/10.3390/ma15134711
Artigo de periodico
Infuence of provenance on physical and mechanical properties of Angelim‑pedra (Hymenolobium petraeum Ducke.) wood species (2021)
Teixeira, Julia Naves; Wolenski, Anderson Renato Vobornik; Aquino, Vinicius Borges de Moura; Panzera, Túlio Hallak ; Silva, Diogo Aparecido Lopes; Campos, Cristiane Inácio; Silva, Sergio Augusto Mello; Lahr, Francisco Antonio Rocco ; Christoforo, André Luis
Fonte: European Journal of Wood and Wood Products. Unidade: EESC
Assuntos: PLASTICIDADE DAS ESTRUTURAS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TEIXEIRA, Julia Naves et al. Infuence of provenance on physical and mechanical properties of Angelim‑pedra (Hymenolobium petraeum Ducke.) wood species. European Journal of Wood and Wood Products, v. 79, p. 1241-1251, 2021Tradução . . Disponível em: https://doi.org/10.1007/s00107-021-01692-4. Acesso em: 13 jul. 2024.
APA
Teixeira, J. N., Wolenski, A. R. V., Aquino, V. B. de M., Panzera, T. H., Silva, D. A. L., Campos, C. I., et al. (2021). Infuence of provenance on physical and mechanical properties of Angelim‑pedra (Hymenolobium petraeum Ducke.) wood species. European Journal of Wood and Wood Products, 79, 1241-1251. doi:10.1007/s00107-021-01692-4
NLM
Teixeira JN, Wolenski ARV, Aquino VB de M, Panzera TH, Silva DAL, Campos CI, Silva SAM, Lahr FAR, Christoforo AL. Infuence of provenance on physical and mechanical properties of Angelim‑pedra (Hymenolobium petraeum Ducke.) wood species [Internet]. European Journal of Wood and Wood Products. 2021 ; 79 1241-1251.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1007/s00107-021-01692-4
Vancouver
Teixeira JN, Wolenski ARV, Aquino VB de M, Panzera TH, Silva DAL, Campos CI, Silva SAM, Lahr FAR, Christoforo AL. Infuence of provenance on physical and mechanical properties of Angelim‑pedra (Hymenolobium petraeum Ducke.) wood species [Internet]. European Journal of Wood and Wood Products. 2021 ; 79 1241-1251.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1007/s00107-021-01692-4
Artigo de periodico
Properties relationship evaluation and plasticity analytical model approach for Brazilian tropical species (2021)
Marcolin, Leoanrdo Araújo; Moritani, Fabiana Yukiko; Rodegheri, Priscila Mirapalhete; Lahr, Francisco Antonio Rocco
Fonte: European Journal of Wood and Wood Products. Unidade: EESC
Assuntos: MODELOS ANALÍTICOS, PLASTICIDADE DAS ESTRUTURAS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARCOLIN, Leoanrdo Araújo et al. Properties relationship evaluation and plasticity analytical model approach for Brazilian tropical species. European Journal of Wood and Wood Products, v. 79, p. 477-485, 2021Tradução . . Disponível em: https://doi.org/10.1007/s00107-020-01605-x. Acesso em: 13 jul. 2024.
APA
Marcolin, L. A., Moritani, F. Y., Rodegheri, P. M., & Lahr, F. A. R. (2021). Properties relationship evaluation and plasticity analytical model approach for Brazilian tropical species. European Journal of Wood and Wood Products, 79, 477-485. doi:10.1007/s00107-020-01605-x
NLM
Marcolin LA, Moritani FY, Rodegheri PM, Lahr FAR. Properties relationship evaluation and plasticity analytical model approach for Brazilian tropical species [Internet]. European Journal of Wood and Wood Products. 2021 ; 79 477-485.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1007/s00107-020-01605-x
Vancouver
Marcolin LA, Moritani FY, Rodegheri PM, Lahr FAR. Properties relationship evaluation and plasticity analytical model approach for Brazilian tropical species [Internet]. European Journal of Wood and Wood Products. 2021 ; 79 477-485.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1007/s00107-020-01605-x
Artigo de periodico
Wood consumption and fixations of carbon dioxide and carbon from timber housing techniques: a Brazilian panorama (2020)
Araujo, Victor de; Vasconcelos, Juliano; Barbosa, Juliana Cortez; Morales, Elen; Christoforo, André Luis ; Gava, Maristela; Lahr, Francisco Antonio Rocco ; Garcia, José Nivaldo
Fonte: Energy and Buildings. Unidades: EESC, ESALQ
Assuntos: HABITAÇÃO, BIOMASSA, MADEIRA, CARBONO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARAUJO, Victor de et al. Wood consumption and fixations of carbon dioxide and carbon from timber housing techniques: a Brazilian panorama. Energy and Buildings, v. 216, p. 1-14, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.enbuild.2020.109960. Acesso em: 13 jul. 2024.
APA
Araujo, V. de, Vasconcelos, J., Barbosa, J. C., Morales, E., Christoforo, A. L., Gava, M., et al. (2020). Wood consumption and fixations of carbon dioxide and carbon from timber housing techniques: a Brazilian panorama. Energy and Buildings, 216, 1-14. doi:10.1016/j.enbuild.2020.109960
NLM
Araujo V de, Vasconcelos J, Barbosa JC, Morales E, Christoforo AL, Gava M, Lahr FAR, Garcia JN. Wood consumption and fixations of carbon dioxide and carbon from timber housing techniques: a Brazilian panorama [Internet]. Energy and Buildings. 2020 ; 216 1-14.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1016/j.enbuild.2020.109960
Vancouver
Araujo V de, Vasconcelos J, Barbosa JC, Morales E, Christoforo AL, Gava M, Lahr FAR, Garcia JN. Wood consumption and fixations of carbon dioxide and carbon from timber housing techniques: a Brazilian panorama [Internet]. Energy and Buildings. 2020 ; 216 1-14.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1016/j.enbuild.2020.109960
Artigo de periodico
Evaluation of mechanical strengths of tropical hardwoods: proposal of probabilistic models (2020)
Wolenski, Anderson Renato Vobornik; Peixoto, Rodrigo Guerra; Aquino, Vinicius Borges de Moura; Christoforo, André Luis ; Lahr, Francisco Antonio Rocco ; Panzera, Túlio Hallak
Fonte: European Journal of Wood and Wood Products. Unidade: EESC
Assuntos: RESISTÊNCIA ESTRUTURAL, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
WOLENSKI, Anderson Renato Vobornik et al. Evaluation of mechanical strengths of tropical hardwoods: proposal of probabilistic models. European Journal of Wood and Wood Products, v. 78, p. 757-766, 2020Tradução . . Disponível em: https://doi.org/10.1007/s00107-020-01521-0. Acesso em: 13 jul. 2024.
APA
Wolenski, A. R. V., Peixoto, R. G., Aquino, V. B. de M., Christoforo, A. L., Lahr, F. A. R., & Panzera, T. H. (2020). Evaluation of mechanical strengths of tropical hardwoods: proposal of probabilistic models. European Journal of Wood and Wood Products, 78, 757-766. doi:10.1007/s00107-020-01521-0
NLM
Wolenski ARV, Peixoto RG, Aquino VB de M, Christoforo AL, Lahr FAR, Panzera TH. Evaluation of mechanical strengths of tropical hardwoods: proposal of probabilistic models [Internet]. European Journal of Wood and Wood Products. 2020 ; 78 757-766.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1007/s00107-020-01521-0
Vancouver
Wolenski ARV, Peixoto RG, Aquino VB de M, Christoforo AL, Lahr FAR, Panzera TH. Evaluation of mechanical strengths of tropical hardwoods: proposal of probabilistic models [Internet]. European Journal of Wood and Wood Products. 2020 ; 78 757-766.[citado 2024 jul. 13 ] Available from: https://doi.org/10.1007/s00107-020-01521-0
Trabalho de evento-anais periodico
Thermal insulation particleboards made with wastes from wood and tire rubber (2016)
Bertolini, Marília da Silva; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Fonte: Key Engineering Materials. Nome do evento: International Conference on Non-Conventional Materials and Technologies - NOCMAT. Unidade: EESC
Assuntos: MADEIRA, PNEUS, ISOLAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BERTOLINI, Marília da Silva e CHRISTOFORO, André Luis e LAHR, Francisco Antonio Rocco. Thermal insulation particleboards made with wastes from wood and tire rubber. Key Engineering Materials. Pfaffikon: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.668.263. Acesso em: 13 jul. 2024. , 2016
APA
Bertolini, M. da S., Christoforo, A. L., & Lahr, F. A. R. (2016). Thermal insulation particleboards made with wastes from wood and tire rubber. Key Engineering Materials. Pfaffikon: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.4028/www.scientific.net/KEM.668.263
NLM
Bertolini M da S, Christoforo AL, Lahr FAR. Thermal insulation particleboards made with wastes from wood and tire rubber [Internet]. Key Engineering Materials. 2016 ; 668 263-269.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.263
Vancouver
Bertolini M da S, Christoforo AL, Lahr FAR. Thermal insulation particleboards made with wastes from wood and tire rubber [Internet]. Key Engineering Materials. 2016 ; 668 263-269.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.263
Artigo de periodico
Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive (2015)
Bezerra, Barbara Stolte; Valarelli, Ivaldo de Domenico; Battistelle, Rosane Aparecida Gomes; Zuim, Aline de Lima; Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Fonte: Advanced Materials Research. Unidade: EESC
Assuntos: CANA-DE-AÇÚCAR, BAGAÇOS, CHAPA DE PARTÍCULAS, BAMBU, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BEZERRA, Barbara Stolte et al. Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive. Advanced Materials Research, v. 1088, p. 652-655, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.652. Acesso em: 13 jul. 2024.
APA
Bezerra, B. S., Valarelli, I. de D., Battistelle, R. A. G., Zuim, A. de L., Branco, L. A. M. N., Chahud, E., et al. (2015). Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive. Advanced Materials Research, 1088, 652-655. doi:10.4028/www.scientific.net/AMR.1088.652
NLM
Bezerra BS, Valarelli I de D, Battistelle RAG, Zuim A de L, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive [Internet]. Advanced Materials Research. 2015 ; 1088 652-655.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.652
Vancouver
Bezerra BS, Valarelli I de D, Battistelle RAG, Zuim A de L, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive [Internet]. Advanced Materials Research. 2015 ; 1088 652-655.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.652
Artigo de periodico
Poisson’s ratios for wood species for structural purposes (2015)
Lahr, Francisco Antonio Rocco; Christoforo, André Luis; Chahud, Eduardo; Branco, Luiz Antônio Melgaço Nunes; Battistelle, Rosane Aparecida Gomes; Valarelli, Ivaldo de Domenico
Fonte: Advanced Materials Research. Unidade: EESC
Assuntos: MADEIRA (PROPRIEDADES FÍSICAS), MADEIRA (PROPRIEDADES MECÂNICAS), ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAHR, Francisco Antonio Rocco et al. Poisson’s ratios for wood species for structural purposes. Advanced Materials Research, v. 1088, p. 690-693, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.690. Acesso em: 13 jul. 2024.
APA
Lahr, F. A. R., Christoforo, A. L., Chahud, E., Branco, L. A. M. N., Battistelle, R. A. G., & Valarelli, I. de D. (2015). Poisson’s ratios for wood species for structural purposes. Advanced Materials Research, 1088, 690-693. doi:10.4028/www.scientific.net/AMR.1088.690
NLM
Lahr FAR, Christoforo AL, Chahud E, Branco LAMN, Battistelle RAG, Valarelli I de D. Poisson’s ratios for wood species for structural purposes [Internet]. Advanced Materials Research. 2015 ; 1088 690-693.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.690
Vancouver
Lahr FAR, Christoforo AL, Chahud E, Branco LAMN, Battistelle RAG, Valarelli I de D. Poisson’s ratios for wood species for structural purposes [Internet]. Advanced Materials Research. 2015 ; 1088 690-693.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.690
Artigo de periodico
Evaluation of the moisture content in stiffness properties of structural glulam beams (2015)
Lahr, Francisco Antonio Rocco; Christoforo, André Luis; Campos, Cristiane Inácio de; Morales, Elen Aparecida Martines; Barbosa, Juliana Cortez; Panzera, Túlio Hallak
Fonte: Advanced Materials Research. Unidade: EESC
Assuntos: VIGAS, VIBRAÇÕES, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAHR, Francisco Antonio Rocco et al. Evaluation of the moisture content in stiffness properties of structural glulam beams. Advanced Materials Research, v. 1088, p. 676-679, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.676. Acesso em: 13 jul. 2024.
APA
Lahr, F. A. R., Christoforo, A. L., Campos, C. I. de, Morales, E. A. M., Barbosa, J. C., & Panzera, T. H. (2015). Evaluation of the moisture content in stiffness properties of structural glulam beams. Advanced Materials Research, 1088, 676-679. doi:10.4028/www.scientific.net/AMR.1088.676
NLM
Lahr FAR, Christoforo AL, Campos CI de, Morales EAM, Barbosa JC, Panzera TH. Evaluation of the moisture content in stiffness properties of structural glulam beams [Internet]. Advanced Materials Research. 2015 ; 1088 676-679.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.676
Vancouver
Lahr FAR, Christoforo AL, Campos CI de, Morales EAM, Barbosa JC, Panzera TH. Evaluation of the moisture content in stiffness properties of structural glulam beams [Internet]. Advanced Materials Research. 2015 ; 1088 676-679.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.676
Artigo de periodico
Characterization of medium density particleborads using agricultural residues (2015)
Valarelli, Ivaldo de Domenico; Battistelle, Rosane Aparecida Gomes; Bezerra, Barbara Stolte; Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Fonte: Advanced Materials Research. Unidade: EESC
Assuntos: CHAPA DE PARTÍCULAS, BAMBU, RESÍDUOS AGRÍCOLAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VALARELLI, Ivaldo de Domenico et al. Characterization of medium density particleborads using agricultural residues. Advanced Materials Research, v. 1088, p. 656-659, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.656. Acesso em: 13 jul. 2024.
APA
Valarelli, I. de D., Battistelle, R. A. G., Bezerra, B. S., Branco, L. A. M. N., Chahud, E., Christoforo, A. L., & Lahr, F. A. R. (2015). Characterization of medium density particleborads using agricultural residues. Advanced Materials Research, 1088, 656-659. doi:10.4028/www.scientific.net/AMR.1088.656
NLM
Valarelli I de D, Battistelle RAG, Bezerra BS, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Characterization of medium density particleborads using agricultural residues [Internet]. Advanced Materials Research. 2015 ; 1088 656-659.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.656
Vancouver
Valarelli I de D, Battistelle RAG, Bezerra BS, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Characterization of medium density particleborads using agricultural residues [Internet]. Advanced Materials Research. 2015 ; 1088 656-659.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.656
Artigo de periodico
Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie (2015)
Christoforo, André Luis; Lahr, Francisco Antonio Rocco; Valarelli, Ivaldo de Domenico; Battistelle, Rosane Aparecida Gomes; Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Panzera, Túlio Hallak
Fonte: Advanced Materials Research. Unidade: EESC
Assuntos: ELASTICIDADE, MADEIRA, MÍNIMOS QUADRADOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFORO, André Luis et al. Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie. Advanced Materials Research, v. 1088, p. 599-602, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.599. Acesso em: 13 jul. 2024.
APA
Christoforo, A. L., Lahr, F. A. R., Valarelli, I. de D., Battistelle, R. A. G., Branco, L. A. M. N., Chahud, E., & Panzera, T. H. (2015). Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie. Advanced Materials Research, 1088, 599-602. doi:10.4028/www.scientific.net/AMR.1088.599
NLM
Christoforo AL, Lahr FAR, Valarelli I de D, Battistelle RAG, Branco LAMN, Chahud E, Panzera TH. Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie [Internet]. Advanced Materials Research. 2015 ; 1088 599-602.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.599
Vancouver
Christoforo AL, Lahr FAR, Valarelli I de D, Battistelle RAG, Branco LAMN, Chahud E, Panzera TH. Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie [Internet]. Advanced Materials Research. 2015 ; 1088 599-602.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.599
Artigo de periodico
Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie (2015)
Chahud, Eduardo; Branco, Luiz Antônio Melgaço Nunes; Lahr, Francisco Antonio Rocco ; Christoforo, André Luis ; Battistelle, Rosane Aparecida Gomes; Valarelli, Ivaldo De Domenico
Fonte: Advanced Materials Research. Unidade: EESC
Assunto: ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHAHUD, Eduardo et al. Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie. Advanced Materials Research, v. 1088, p. 669-671, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.669. Acesso em: 13 jul. 2024.
APA
Chahud, E., Branco, L. A. M. N., Lahr, F. A. R., Christoforo, A. L., Battistelle, R. A. G., & Valarelli, I. D. D. (2015). Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie. Advanced Materials Research, 1088, 669-671. doi:10.4028/www.scientific.net/AMR.1088.669
NLM
Chahud E, Branco LAMN, Lahr FAR, Christoforo AL, Battistelle RAG, Valarelli IDD. Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie [Internet]. Advanced Materials Research. 2015 ; 1088 669-671.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.669
Vancouver
Chahud E, Branco LAMN, Lahr FAR, Christoforo AL, Battistelle RAG, Valarelli IDD. Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie [Internet]. Advanced Materials Research. 2015 ; 1088 669-671.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.669
Artigo de periodico
Post-fire study of strength and stiffness of a wooden roof structure (2015)
Morales, Elen Aparecida Martines; Galdino, Danilo Soares; Barbosa, Juliana Cortez; Campos, Cristiane Inácio de; Araujo, Victor Almeida de; Lahr, Francisco Antonio Rocco ; Christoforo, André Luis ; Silva, Sérgio Augusto Mello da
Fonte: Advanced Materials Research. Unidades: EESC, ESALQ
Assuntos: INCÊNDIO, MATERIAIS DE CONSTRUÇÃO, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORALES, Elen Aparecida Martines et al. Post-fire study of strength and stiffness of a wooden roof structure. Advanced Materials Research, v. 1088, p. 660-663, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.660. Acesso em: 13 jul. 2024.
APA
Morales, E. A. M., Galdino, D. S., Barbosa, J. C., Campos, C. I. de, Araujo, V. A. de, Lahr, F. A. R., et al. (2015). Post-fire study of strength and stiffness of a wooden roof structure. Advanced Materials Research, 1088, 660-663. doi:10.4028/www.scientific.net/AMR.1088.660
NLM
Morales EAM, Galdino DS, Barbosa JC, Campos CI de, Araujo VA de, Lahr FAR, Christoforo AL, Silva SAM da. Post-fire study of strength and stiffness of a wooden roof structure [Internet]. Advanced Materials Research. 2015 ; 1088 660-663.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.660
Vancouver
Morales EAM, Galdino DS, Barbosa JC, Campos CI de, Araujo VA de, Lahr FAR, Christoforo AL, Silva SAM da. Post-fire study of strength and stiffness of a wooden roof structure [Internet]. Advanced Materials Research. 2015 ; 1088 660-663.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.660
Artigo de periodico
Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers (2015)
Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Lahr, Francisco Antonio Rocco; Christoforo, André Luis; Battistelle, Rosane Aparecida Gomes; Panzera, Túlio Hallak
Fonte: Advanced Materials Research. Unidade: EESC
Assuntos: CONCRETO REFORÇADO COM FIBRAS, ELASTICIDADE DAS ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRANCO, Luiz Antônio Melgaço Nunes et al. Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers. Advanced Materials Research, v. 1088, p. 640-643, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.640. Acesso em: 13 jul. 2024.
APA
Branco, L. A. M. N., Chahud, E., Lahr, F. A. R., Christoforo, A. L., Battistelle, R. A. G., & Panzera, T. H. (2015). Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers. Advanced Materials Research, 1088, 640-643. doi:10.4028/www.scientific.net/AMR.1088.640
NLM
Branco LAMN, Chahud E, Lahr FAR, Christoforo AL, Battistelle RAG, Panzera TH. Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers [Internet]. Advanced Materials Research. 2015 ; 1088 640-643.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.640
Vancouver
Branco LAMN, Chahud E, Lahr FAR, Christoforo AL, Battistelle RAG, Panzera TH. Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers [Internet]. Advanced Materials Research. 2015 ; 1088 640-643.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.640
Artigo de periodico
Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives (2015)
Battistelle, Rosane Aparecida Gomes; Bezerra, Barbara Stolte; Valarelli, Ivaldo de Domenico; Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Fonte: Advanced Materials Research. Unidade: EESC
Assuntos: PLÁSTICOS, MATERIAIS COMPÓSITOS, CANA-DE-AÇÚCAR, BAGAÇOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BATTISTELLE, Rosane Aparecida Gomes et al. Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives. Advanced Materials Research, v. 1088, p. 407-410, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.407. Acesso em: 13 jul. 2024.
APA
Battistelle, R. A. G., Bezerra, B. S., Valarelli, I. de D., Branco, L. A. M. N., Chahud, E., Christoforo, A. L., & Lahr, F. A. R. (2015). Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives. Advanced Materials Research, 1088, 407-410. doi:10.4028/www.scientific.net/AMR.1088.407
NLM
Battistelle RAG, Bezerra BS, Valarelli I de D, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives [Internet]. Advanced Materials Research. 2015 ; 1088 407-410.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.407
Vancouver
Battistelle RAG, Bezerra BS, Valarelli I de D, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives [Internet]. Advanced Materials Research. 2015 ; 1088 407-410.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.407
Artigo de periodico
Particleboard manufactured with variation of press time (2015)
Campos, Cristiane Inácio de; Ferreira, Bruno Santos; Lahr, Francisco Antonio Rocco; Christoforo, André Luis; Barbosa, Juliana Cortez; Morales, Elen Aparecida Martines; Lima, Felipe Oliveira
Fonte: Advanced Materials Research. Unidade: EESC
Assuntos: PAINÉIS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS, Cristiane Inácio de et al. Particleboard manufactured with variation of press time. Advanced Materials Research, v. 1088, p. 644-647, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.644. Acesso em: 13 jul. 2024.
APA
Campos, C. I. de, Ferreira, B. S., Lahr, F. A. R., Christoforo, A. L., Barbosa, J. C., Morales, E. A. M., & Lima, F. O. (2015). Particleboard manufactured with variation of press time. Advanced Materials Research, 1088, 644-647. doi:10.4028/www.scientific.net/AMR.1088.644
NLM
Campos CI de, Ferreira BS, Lahr FAR, Christoforo AL, Barbosa JC, Morales EAM, Lima FO. Particleboard manufactured with variation of press time [Internet]. Advanced Materials Research. 2015 ; 1088 644-647.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.644
Vancouver
Campos CI de, Ferreira BS, Lahr FAR, Christoforo AL, Barbosa JC, Morales EAM, Lima FO. Particleboard manufactured with variation of press time [Internet]. Advanced Materials Research. 2015 ; 1088 644-647.[citado 2024 jul. 13 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.644

Unidades USP

ReP

Filtros

Autores

Autores USP

Ano de publicação

Assuntos

Título da fonte

Agência de fomento

Indexado em

Afiliação dos autores externos não normalizada