ReP USP - Resultado da busca

Artigo de periodico
Tribological investigations on tool surfaces for temperature-supported forming of magnesium AZ31 sheets (2020)
Silva, Bruno Caetano Dos Santos; Rodrigues, Alisson Mendes ; Mueller, Roland; Lora, Fábio André; Nascimento, Marcio Luis Ferreira ; Pinto, Haroldo Cavalcanti ; Coelho, Rodrigo Santiago
Source: Materials. Unidade: EESC
Subjects: ESTRUTURA DE SUPERFÍCIE, TRIBOLOGIA, LIGAS METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Bruno Caetano Dos Santos et al. Tribological investigations on tool surfaces for temperature-supported forming of magnesium AZ31 sheets. Materials, v. 13, n. 11, 2020Tradução . . Disponível em: https://doi.org/10.3390/ma13112465. Acesso em: 25 maio 2024.
APA
Silva, B. C. D. S., Rodrigues, A. M., Mueller, R., Lora, F. A., Nascimento, M. L. F., Pinto, H. C., & Coelho, R. S. (2020). Tribological investigations on tool surfaces for temperature-supported forming of magnesium AZ31 sheets. Materials, 13( 11). doi:10.3390/ma13112465
NLM
Silva BCDS, Rodrigues AM, Mueller R, Lora FA, Nascimento MLF, Pinto HC, Coelho RS. Tribological investigations on tool surfaces for temperature-supported forming of magnesium AZ31 sheets [Internet]. Materials. 2020 ; 13( 11):[citado 2024 maio 25 ] Available from: https://doi.org/10.3390/ma13112465
Vancouver
Silva BCDS, Rodrigues AM, Mueller R, Lora FA, Nascimento MLF, Pinto HC, Coelho RS. Tribological investigations on tool surfaces for temperature-supported forming of magnesium AZ31 sheets [Internet]. Materials. 2020 ; 13( 11):[citado 2024 maio 25 ] Available from: https://doi.org/10.3390/ma13112465
Artigo de periodico
Mg-containing multi-principal element alloys for hydrogen storage: A study of the MgTiNbCr0.5Mn0.5Ni0.5 and Mg0.68TiNbNi0.55 compositions (2020)
Marques, Felipe; Pinto, Haroldo Cavalcanti ; Figueroa, Santiago J A; Winkelmann, Frederik; Felderhoff, Michael; Botta, Walter José; Zepon, Guilherme
Source: International Journal of Hydrogen Energy. Unidade: EESC
Subjects: RADIAÇÃO SINCROTRON, HIDROGÊNIO, LIGAS METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Felipe et al. Mg-containing multi-principal element alloys for hydrogen storage: A study of the MgTiNbCr0.5Mn0.5Ni0.5 and Mg0.68TiNbNi0.55 compositions. International Journal of Hydrogen Energy, v. 45, n. 38, p. 19539-19552, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.ijhydene.2020.05.069. Acesso em: 25 maio 2024.
APA
Marques, F., Pinto, H. C., Figueroa, S. J. A., Winkelmann, F., Felderhoff, M., Botta, W. J., & Zepon, G. (2020). Mg-containing multi-principal element alloys for hydrogen storage: A study of the MgTiNbCr0.5Mn0.5Ni0.5 and Mg0.68TiNbNi0.55 compositions. International Journal of Hydrogen Energy, 45( 38), 19539-19552. doi:10.1016/j.ijhydene.2020.05.069
NLM
Marques F, Pinto HC, Figueroa SJA, Winkelmann F, Felderhoff M, Botta WJ, Zepon G. Mg-containing multi-principal element alloys for hydrogen storage: A study of the MgTiNbCr0.5Mn0.5Ni0.5 and Mg0.68TiNbNi0.55 compositions [Internet]. International Journal of Hydrogen Energy. 2020 ; 45( 38): 19539-19552.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.ijhydene.2020.05.069
Vancouver
Marques F, Pinto HC, Figueroa SJA, Winkelmann F, Felderhoff M, Botta WJ, Zepon G. Mg-containing multi-principal element alloys for hydrogen storage: A study of the MgTiNbCr0.5Mn0.5Ni0.5 and Mg0.68TiNbNi0.55 compositions [Internet]. International Journal of Hydrogen Energy. 2020 ; 45( 38): 19539-19552.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.ijhydene.2020.05.069
Artigo de periodico
Microstructure and physico-mechanical properties of Al2O3-doped sustainable glass-ceramic foams (2020)
Costa, Fabiana Pereira da; Morais, Crislene Rodrigues da Silva; Pinto, Haroldo Cavalcanti ; Rodrigues, Alisson Mendes
Source: Materials Chemistry and Physics. Unidade: EESC
Subjects: VIDRO CERÂMICO, ALUMINA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COSTA, Fabiana Pereira da et al. Microstructure and physico-mechanical properties of Al2O3-doped sustainable glass-ceramic foams. Materials Chemistry and Physics, v. 256, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.matchemphys.2020.123612. Acesso em: 25 maio 2024.
APA
Costa, F. P. da, Morais, C. R. da S., Pinto, H. C., & Rodrigues, A. M. (2020). Microstructure and physico-mechanical properties of Al2O3-doped sustainable glass-ceramic foams. Materials Chemistry and Physics, 256. doi:10.1016/j.matchemphys.2020.123612
NLM
Costa FP da, Morais CR da S, Pinto HC, Rodrigues AM. Microstructure and physico-mechanical properties of Al2O3-doped sustainable glass-ceramic foams [Internet]. Materials Chemistry and Physics. 2020 ; 256[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.matchemphys.2020.123612
Vancouver
Costa FP da, Morais CR da S, Pinto HC, Rodrigues AM. Microstructure and physico-mechanical properties of Al2O3-doped sustainable glass-ceramic foams [Internet]. Materials Chemistry and Physics. 2020 ; 256[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.matchemphys.2020.123612
Artigo de periodico
Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering (2020)
Avila, Pedro Renato Tavares ; Rodrigues, Alisson Mendes ; Guimaraes, Mônica Costa Rodrigues ; Walczak, Magdalena; Menezes, Romualdo Rodrigues; Neves, Gelmires de Araújo ; Pinto, Haroldo Cavalcanti
Source: Materials. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AVILA, Pedro Renato Tavares et al. Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering. Materials, v. 13, n. 16, 2020Tradução . . Disponível em: https://doi.org/10.3390/ma13163650. Acesso em: 25 maio 2024.
APA
Avila, P. R. T., Rodrigues, A. M., Guimaraes, M. C. R., Walczak, M., Menezes, R. R., Neves, G. de A., & Pinto, H. C. (2020). Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering. Materials, 13( 16). doi:10.3390/ma13163650
NLM
Avila PRT, Rodrigues AM, Guimaraes MCR, Walczak M, Menezes RR, Neves G de A, Pinto HC. Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering [Internet]. Materials. 2020 ; 13( 16):[citado 2024 maio 25 ] Available from: https://doi.org/10.3390/ma13163650
Vancouver
Avila PRT, Rodrigues AM, Guimaraes MCR, Walczak M, Menezes RR, Neves G de A, Pinto HC. Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering [Internet]. Materials. 2020 ; 13( 16):[citado 2024 maio 25 ] Available from: https://doi.org/10.3390/ma13163650
Artigo de periodico
Hydrogen storage properties of filings of the ZK60 alloy modified with 2.5 wt% mischmetal (2020)
Silva, Erenilton Pereira da; Leiva, Daniel; Floriano, Ricardo; Oliveira, Verona Biancardi ; Pinto, Haroldo Cavalcanti ; Botta, Walter José
Source: International Journal of Hydrogen Energy. Unidade: EESC
Subjects: LAMINAÇÃO, HIDROGÊNIO, ROLAMENTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Erenilton Pereira da et al. Hydrogen storage properties of filings of the ZK60 alloy modified with 2.5 wt% mischmetal. International Journal of Hydrogen Energy, v. 45, n. 8, p. 5375-5383, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.ijhydene.2019.05.207. Acesso em: 25 maio 2024.
APA
Silva, E. P. da, Leiva, D., Floriano, R., Oliveira, V. B., Pinto, H. C., & Botta, W. J. (2020). Hydrogen storage properties of filings of the ZK60 alloy modified with 2.5 wt% mischmetal. International Journal of Hydrogen Energy, 45( 8), 5375-5383. doi:10.1016/j.ijhydene.2019.05.207
NLM
Silva EP da, Leiva D, Floriano R, Oliveira VB, Pinto HC, Botta WJ. Hydrogen storage properties of filings of the ZK60 alloy modified with 2.5 wt% mischmetal [Internet]. International Journal of Hydrogen Energy. 2020 ; 45( 8): 5375-5383.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.ijhydene.2019.05.207
Vancouver
Silva EP da, Leiva D, Floriano R, Oliveira VB, Pinto HC, Botta WJ. Hydrogen storage properties of filings of the ZK60 alloy modified with 2.5 wt% mischmetal [Internet]. International Journal of Hydrogen Energy. 2020 ; 45( 8): 5375-5383.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.ijhydene.2019.05.207
Monografia/livro
Effect of textures and microstructures on the occurrence of delamination during and after fracture toughness tests of API X80 steel plates (2020)
Conde, Fabio Faria ; Pinto, Haroldo Cavalcanti ; Masoumi, Mohammad ; Ávila Diaz, Julián Arnaldo
Source: Strength of Materials. Unidade: EESC
Subjects: CRISTALOGRAFIA, AÇO, TENACIDADE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CONDE, Fabio Faria et al. Effect of textures and microstructures on the occurrence of delamination during and after fracture toughness tests of API X80 steel plates. Strength of Materials. London: IntechOpen. Disponível em: https://doi.org/10.5772/intechopen.88001. Acesso em: 25 maio 2024. , 2020
APA
Conde, F. F., Pinto, H. C., Masoumi, M., & Ávila Diaz, J. A. (2020). Effect of textures and microstructures on the occurrence of delamination during and after fracture toughness tests of API X80 steel plates. Strength of Materials. London: IntechOpen. doi:10.5772/intechopen.88001
NLM
Conde FF, Pinto HC, Masoumi M, Ávila Diaz JA. Effect of textures and microstructures on the occurrence of delamination during and after fracture toughness tests of API X80 steel plates [Internet]. Strength of Materials. 2020 ;[citado 2024 maio 25 ] Available from: https://doi.org/10.5772/intechopen.88001
Vancouver
Conde FF, Pinto HC, Masoumi M, Ávila Diaz JA. Effect of textures and microstructures on the occurrence of delamination during and after fracture toughness tests of API X80 steel plates [Internet]. Strength of Materials. 2020 ;[citado 2024 maio 25 ] Available from: https://doi.org/10.5772/intechopen.88001
Artigo de periodico
In situ evaluation of the low-temperature aging response of Ti–5Al–5Mo–5V–3Cr alloy as influenced by starting microstructure (2020)
Callegari, Bruna; Aristizabal, K.; Suarez, S.; Wu, L.; Coelho, R. S.; Brito, P. P.; García, J. L.; Soldera, F. A.; Mücklich, F.; Pinto, Haroldo Cavalcanti
Source: Journal of Alloys and Compounds. Unidade: EESC
Subjects: DIFRAÇÃO POR RAIOS X, MUDANÇA DE FASE, TITÂNIO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALLEGARI, Bruna et al. In situ evaluation of the low-temperature aging response of Ti–5Al–5Mo–5V–3Cr alloy as influenced by starting microstructure. Journal of Alloys and Compounds, v. 835, p. 1-13, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.jallcom.2020.155331. Acesso em: 25 maio 2024.
APA
Callegari, B., Aristizabal, K., Suarez, S., Wu, L., Coelho, R. S., Brito, P. P., et al. (2020). In situ evaluation of the low-temperature aging response of Ti–5Al–5Mo–5V–3Cr alloy as influenced by starting microstructure. Journal of Alloys and Compounds, 835, 1-13. doi:10.1016/j.jallcom.2020.155331
NLM
Callegari B, Aristizabal K, Suarez S, Wu L, Coelho RS, Brito PP, García JL, Soldera FA, Mücklich F, Pinto HC. In situ evaluation of the low-temperature aging response of Ti–5Al–5Mo–5V–3Cr alloy as influenced by starting microstructure [Internet]. Journal of Alloys and Compounds. 2020 ; 835 1-13.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.jallcom.2020.155331
Vancouver
Callegari B, Aristizabal K, Suarez S, Wu L, Coelho RS, Brito PP, García JL, Soldera FA, Mücklich F, Pinto HC. In situ evaluation of the low-temperature aging response of Ti–5Al–5Mo–5V–3Cr alloy as influenced by starting microstructure [Internet]. Journal of Alloys and Compounds. 2020 ; 835 1-13.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.jallcom.2020.155331
Dissertação (Mestrado)
In-situ study of residual stress evolution in Zr(C,N)/a-Al2O3 03 and Zr(C,N)/k-Al2O3 CVD multilayers during thermal cycling (2019)
Moreno, Maiara Fernanda; Pinto, Haroldo Cavalcanti (Orientador)
Unidade: EESC
Subjects: RESISTÊNCIA DOS MATERIAIS, FRESAGEM, TENSÃO RESIDUAL, FILMES FINOS, DIFRAÇÃO POR RAIOS X
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORENO, Maiara Fernanda. In-situ study of residual stress evolution in Zr(C,N)/a-Al2O3 03 and Zr(C,N)/k-Al2O3 CVD multilayers during thermal cycling. 2019. Dissertação (Mestrado) – Universidade de São Paulo, São Carlos, 2019. Disponível em: https://www.teses.usp.br/teses/disponiveis/18/18158/tde-19112019-102428/. Acesso em: 25 maio 2024.
APA
Moreno, M. F. (2019). In-situ study of residual stress evolution in Zr(C,N)/a-Al2O3 03 and Zr(C,N)/k-Al2O3 CVD multilayers during thermal cycling (Dissertação (Mestrado). Universidade de São Paulo, São Carlos. Recuperado de https://www.teses.usp.br/teses/disponiveis/18/18158/tde-19112019-102428/
NLM
Moreno MF. In-situ study of residual stress evolution in Zr(C,N)/a-Al2O3 03 and Zr(C,N)/k-Al2O3 CVD multilayers during thermal cycling [Internet]. 2019 ;[citado 2024 maio 25 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18158/tde-19112019-102428/
Vancouver
Moreno MF. In-situ study of residual stress evolution in Zr(C,N)/a-Al2O3 03 and Zr(C,N)/k-Al2O3 CVD multilayers during thermal cycling [Internet]. 2019 ;[citado 2024 maio 25 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18158/tde-19112019-102428/
Artigo de periodico
Corrosion behavior of as-cast ZK60 alloy modified with rare earth addition in sodium sulfate medium (2019)
Oliveira, Verona Biancardi ; Rosa, Viera Luccas; Lima, Bruno de Abreu; Avila, Pedro Renato Tavares ; Rêgo, Galtiere Corrêa ; Pinto, Haroldo Cavalcanti ; Bastos, Ivan Napoleão; Silva, Erenilton Pereira da
Source: Corrosion Science: the journal on environmental degradation of materials and its control. Unidade: EESC
Subjects: PROCESSO SOL-GEL, TERRAS RARAS, LIGAS FUNDIDAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Verona Biancardi et al. Corrosion behavior of as-cast ZK60 alloy modified with rare earth addition in sodium sulfate medium. Corrosion Science: the journal on environmental degradation of materials and its control, v. 158, p. Se 2019, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.corsci.2019.108092. Acesso em: 25 maio 2024.
APA
Oliveira, V. B., Rosa, V. L., Lima, B. de A., Avila, P. R. T., Rêgo, G. C., Pinto, H. C., et al. (2019). Corrosion behavior of as-cast ZK60 alloy modified with rare earth addition in sodium sulfate medium. Corrosion Science: the journal on environmental degradation of materials and its control, 158, Se 2019. doi:10.1016/j.corsci.2019.108092
NLM
Oliveira VB, Rosa VL, Lima B de A, Avila PRT, Rêgo GC, Pinto HC, Bastos IN, Silva EP da. Corrosion behavior of as-cast ZK60 alloy modified with rare earth addition in sodium sulfate medium [Internet]. Corrosion Science: the journal on environmental degradation of materials and its control. 2019 ; 158 Se 2019.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.corsci.2019.108092
Vancouver
Oliveira VB, Rosa VL, Lima B de A, Avila PRT, Rêgo GC, Pinto HC, Bastos IN, Silva EP da. Corrosion behavior of as-cast ZK60 alloy modified with rare earth addition in sodium sulfate medium [Internet]. Corrosion Science: the journal on environmental degradation of materials and its control. 2019 ; 158 Se 2019.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.corsci.2019.108092
Artigo de periodico
Effect of ion peening and pulsed plasma nitriding on the structural properties of TiN coatings sputtered onto 100Cr6 steel (2019)
Vales, Sandra dos Santos; Avila, Pedro Renato Tavares ; Rosenkranz, Andreas; Droppa Jr., Roosevelt; Soldera, Flavio; Garcia, Jose; Alvarez, Fernando; Pinto, Haroldo Cavalcanti
Source: Materials Chemistry and Physics. Unidade: EESC
Subjects: TRIBOLOGIA, TENSÃO RESIDUAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VALES, Sandra dos Santos et al. Effect of ion peening and pulsed plasma nitriding on the structural properties of TiN coatings sputtered onto 100Cr6 steel. Materials Chemistry and Physics, v. 235, p. Se 2019, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.matchemphys.2019.121723. Acesso em: 25 maio 2024.
APA
Vales, S. dos S., Avila, P. R. T., Rosenkranz, A., Droppa Jr., R., Soldera, F., Garcia, J., et al. (2019). Effect of ion peening and pulsed plasma nitriding on the structural properties of TiN coatings sputtered onto 100Cr6 steel. Materials Chemistry and Physics, 235, Se 2019. doi:10.1016/j.matchemphys.2019.121723
NLM
Vales S dos S, Avila PRT, Rosenkranz A, Droppa Jr. R, Soldera F, Garcia J, Alvarez F, Pinto HC. Effect of ion peening and pulsed plasma nitriding on the structural properties of TiN coatings sputtered onto 100Cr6 steel [Internet]. Materials Chemistry and Physics. 2019 ; 235 Se 2019.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.matchemphys.2019.121723
Vancouver
Vales S dos S, Avila PRT, Rosenkranz A, Droppa Jr. R, Soldera F, Garcia J, Alvarez F, Pinto HC. Effect of ion peening and pulsed plasma nitriding on the structural properties of TiN coatings sputtered onto 100Cr6 steel [Internet]. Materials Chemistry and Physics. 2019 ; 235 Se 2019.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.matchemphys.2019.121723
Artigo de periodico
Influence of shot peening on residual stresses and tribological behavior of cast and austempered ductile iron (2019)
Silva, Klaus H.S.; Carneiro, José Rubens Gonçalves; Coelho, Rodrigo Santiago; Pinto, Haroldo Cavalcanti ; Brito, Pedro
Source: Wear: an international journal on the science and technology of friction, lubrication and wear. Unidade: EESC
Subjects: TRIBOLOGIA, DESGASTE DOS MATERIAIS, FERRO FUNDIDO, TENSÃO RESIDUAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Klaus H.S. et al. Influence of shot peening on residual stresses and tribological behavior of cast and austempered ductile iron. Wear: an international journal on the science and technology of friction, lubrication and wear, v. 400-441, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2019.203099. Acesso em: 25 maio 2024.
APA
Silva, K. H. S., Carneiro, J. R. G., Coelho, R. S., Pinto, H. C., & Brito, P. (2019). Influence of shot peening on residual stresses and tribological behavior of cast and austempered ductile iron. Wear: an international journal on the science and technology of friction, lubrication and wear, 400-441. doi:10.1016/j.wear.2019.203099
NLM
Silva KHS, Carneiro JRG, Coelho RS, Pinto HC, Brito P. Influence of shot peening on residual stresses and tribological behavior of cast and austempered ductile iron [Internet]. Wear: an international journal on the science and technology of friction, lubrication and wear. 2019 ; 400-441[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.wear.2019.203099
Vancouver
Silva KHS, Carneiro JRG, Coelho RS, Pinto HC, Brito P. Influence of shot peening on residual stresses and tribological behavior of cast and austempered ductile iron [Internet]. Wear: an international journal on the science and technology of friction, lubrication and wear. 2019 ; 400-441[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.wear.2019.203099
Artigo de periodico
Physical simulation as a tool to understand friction stir processed X80 pipeline steel plate complex microstructures (2019)
Ávila Diaz, Julián Arnaldo ; Escobar, Julian; Cunha, Barbara; Magalhães, William; Mei, Paulo Roberto; Rodriguez, Johnnatan ; Pinto, Haroldo Cavalcanti ; Ramirez, Antonio
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: SOLDAGEM POR FRICÇÃO, AÇO BAINITA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ÁVILA DIAZ, Julián Arnaldo et al. Physical simulation as a tool to understand friction stir processed X80 pipeline steel plate complex microstructures. Journal of Materials Research and Technology, v. 8, n. ja/mar. 2019, p. 1379-1388, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2018.09.009. Acesso em: 25 maio 2024.
APA
Ávila Diaz, J. A., Escobar, J., Cunha, B., Magalhães, W., Mei, P. R., Rodriguez, J., et al. (2019). Physical simulation as a tool to understand friction stir processed X80 pipeline steel plate complex microstructures. Journal of Materials Research and Technology, 8( ja/mar. 2019), 1379-1388. doi:10.1016/j.jmrt.2018.09.009
NLM
Ávila Diaz JA, Escobar J, Cunha B, Magalhães W, Mei PR, Rodriguez J, Pinto HC, Ramirez A. Physical simulation as a tool to understand friction stir processed X80 pipeline steel plate complex microstructures [Internet]. Journal of Materials Research and Technology. 2019 ; 8( ja/mar. 2019): 1379-1388.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.jmrt.2018.09.009
Vancouver
Ávila Diaz JA, Escobar J, Cunha B, Magalhães W, Mei PR, Rodriguez J, Pinto HC, Ramirez A. Physical simulation as a tool to understand friction stir processed X80 pipeline steel plate complex microstructures [Internet]. Journal of Materials Research and Technology. 2019 ; 8( ja/mar. 2019): 1379-1388.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.jmrt.2018.09.009
Artigo de periodico
On manufacturing multilayer- like nanostructures using misorientation gradients in PVD flms (2019)
Avila, Pedro Renato Tavares ; Silva, Erenilton Pereira da; Rodrigues, Alisson Mendes ; Aristizabal, Katherine ; Pineda, Fabiola; Coelho, Rodrigo Santiago; Garcia, Jose Luís; Soldera, Flavio; Walczak, Magdalena; Pinto, Haroldo Cavalcanti
Source: Scientific Reports. Unidade: EESC
Subjects: REVESTIMENTOS, TRIBOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AVILA, Pedro Renato Tavares et al. On manufacturing multilayer- like nanostructures using misorientation gradients in PVD flms. Scientific Reports, v. No 2019, 2019Tradução . . Disponível em: https://doi.org/10.1038/s41598-019-52226-1. Acesso em: 25 maio 2024.
APA
Avila, P. R. T., Silva, E. P. da, Rodrigues, A. M., Aristizabal, K., Pineda, F., Coelho, R. S., et al. (2019). On manufacturing multilayer- like nanostructures using misorientation gradients in PVD flms. Scientific Reports, No 2019. doi:10.1038/s41598-019-52226-1
NLM
Avila PRT, Silva EP da, Rodrigues AM, Aristizabal K, Pineda F, Coelho RS, Garcia JL, Soldera F, Walczak M, Pinto HC. On manufacturing multilayer- like nanostructures using misorientation gradients in PVD flms [Internet]. Scientific Reports. 2019 ; No 2019[citado 2024 maio 25 ] Available from: https://doi.org/10.1038/s41598-019-52226-1
Vancouver
Avila PRT, Silva EP da, Rodrigues AM, Aristizabal K, Pineda F, Coelho RS, Garcia JL, Soldera F, Walczak M, Pinto HC. On manufacturing multilayer- like nanostructures using misorientation gradients in PVD flms [Internet]. Scientific Reports. 2019 ; No 2019[citado 2024 maio 25 ] Available from: https://doi.org/10.1038/s41598-019-52226-1
Artigo de periodico
Microstructural and residuals stress analysis of friction stir welding of X80 pipeline steel plates using magnetic barkhausen noise (2019)
Ávila Diaz, Julián Arnaldo ; Conde, Fabio Faria ; Pinto, Haroldo Cavalcanti ; Rodriguez, Johnnatan ; Grijalba, Freddy Armando Franco
Source: Journal of Nondestructive Evaluation. Unidade: EESC
Subjects: SOLDAGEM POR FRICÇÃO, DIFRAÇÃO POR RAIOS X, TENSÃO RESIDUAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ÁVILA DIAZ, Julián Arnaldo et al. Microstructural and residuals stress analysis of friction stir welding of X80 pipeline steel plates using magnetic barkhausen noise. Journal of Nondestructive Evaluation, v. 38, n. 86, 2019Tradução . . Disponível em: https://doi.org/10.1007/s10921-019-0625-2. Acesso em: 25 maio 2024.
APA
Ávila Diaz, J. A., Conde, F. F., Pinto, H. C., Rodriguez, J., & Grijalba, F. A. F. (2019). Microstructural and residuals stress analysis of friction stir welding of X80 pipeline steel plates using magnetic barkhausen noise. Journal of Nondestructive Evaluation, 38( 86). doi:10.1007/s10921-019-0625-2
NLM
Ávila Diaz JA, Conde FF, Pinto HC, Rodriguez J, Grijalba FAF. Microstructural and residuals stress analysis of friction stir welding of X80 pipeline steel plates using magnetic barkhausen noise [Internet]. Journal of Nondestructive Evaluation. 2019 ; 38( 86):[citado 2024 maio 25 ] Available from: https://doi.org/10.1007/s10921-019-0625-2
Vancouver
Ávila Diaz JA, Conde FF, Pinto HC, Rodriguez J, Grijalba FAF. Microstructural and residuals stress analysis of friction stir welding of X80 pipeline steel plates using magnetic barkhausen noise [Internet]. Journal of Nondestructive Evaluation. 2019 ; 38( 86):[citado 2024 maio 25 ] Available from: https://doi.org/10.1007/s10921-019-0625-2
Dissertação (Mestrado)
Development and characterization of 'CR''N'/'CR''AL''N' multilayer coatings deposited by hybrid magnetron sputtering process (2018)
Castilho, Bruno César Noronha Marques de; Pinto, Haroldo Cavalcanti (Orientador)
Unidade: EESC
Subjects: MOTORES DE COMBUSTÃO INTERNA, DESGASTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTILHO, Bruno César Noronha Marques de. Development and characterization of 'CR''N'/'CR''AL''N' multilayer coatings deposited by hybrid magnetron sputtering process. 2018. Dissertação (Mestrado) – Universidade de São Paulo, São Carlos, 2018. Disponível em: http://www.teses.usp.br/teses/disponiveis/18/18150/tde-15112018-185401/. Acesso em: 25 maio 2024.
APA
Castilho, B. C. N. M. de. (2018). Development and characterization of 'CR''N'/'CR''AL''N' multilayer coatings deposited by hybrid magnetron sputtering process (Dissertação (Mestrado). Universidade de São Paulo, São Carlos. Recuperado de http://www.teses.usp.br/teses/disponiveis/18/18150/tde-15112018-185401/
NLM
Castilho BCNM de. Development and characterization of 'CR''N'/'CR''AL''N' multilayer coatings deposited by hybrid magnetron sputtering process [Internet]. 2018 ;[citado 2024 maio 25 ] Available from: http://www.teses.usp.br/teses/disponiveis/18/18150/tde-15112018-185401/
Vancouver
Castilho BCNM de. Development and characterization of 'CR''N'/'CR''AL''N' multilayer coatings deposited by hybrid magnetron sputtering process [Internet]. 2018 ;[citado 2024 maio 25 ] Available from: http://www.teses.usp.br/teses/disponiveis/18/18150/tde-15112018-185401/
Artigo de periodico
On the effect of aluminum on the microstructure and mechanical properties of CrN coatings deposited by HiPIMS (2018)
Guimarães, Monica Costa Rodrigues; Castilho, Bruno César Noronha Marques de; Cunha, Carlos Renato; Correr, Wagner Rafael; Mordente, Paulo; Alvarez, Fernando; Pinto, Haroldo Cavalcanti
Source: Materials Research. Unidades: IFSC, EESC
Subjects: REVESTIMENTOS, MICROSCOPIA DE FORÇA ATÔMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUIMARÃES, Monica Costa Rodrigues et al. On the effect of aluminum on the microstructure and mechanical properties of CrN coatings deposited by HiPIMS. Materials Research, v. 21, n. 3, p. e20170848-1-e20170848-6, 2018Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2017-0848. Acesso em: 25 maio 2024.
APA
Guimarães, M. C. R., Castilho, B. C. N. M. de, Cunha, C. R., Correr, W. R., Mordente, P., Alvarez, F., & Pinto, H. C. (2018). On the effect of aluminum on the microstructure and mechanical properties of CrN coatings deposited by HiPIMS. Materials Research, 21( 3), e20170848-1-e20170848-6. doi:10.1590/1980-5373-MR-2017-0848
NLM
Guimarães MCR, Castilho BCNM de, Cunha CR, Correr WR, Mordente P, Alvarez F, Pinto HC. On the effect of aluminum on the microstructure and mechanical properties of CrN coatings deposited by HiPIMS [Internet]. Materials Research. 2018 ; 21( 3): e20170848-1-e20170848-6.[citado 2024 maio 25 ] Available from: https://doi.org/10.1590/1980-5373-MR-2017-0848
Vancouver
Guimarães MCR, Castilho BCNM de, Cunha CR, Correr WR, Mordente P, Alvarez F, Pinto HC. On the effect of aluminum on the microstructure and mechanical properties of CrN coatings deposited by HiPIMS [Internet]. Materials Research. 2018 ; 21( 3): e20170848-1-e20170848-6.[citado 2024 maio 25 ] Available from: https://doi.org/10.1590/1980-5373-MR-2017-0848
Artigo de periodico
Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA (2018)
Moreno, João Roberto Sartori; Pinto, Haroldo Cavalcanti ; Correa, C. A.; Mastelari, N.; Marin, L. G.; Silva, E.; Avila, J. A.
Source: International Journal of Advanced Engineering Research and Science. Unidade: EESC
Subjects: AÇO, SOLDAGEM A ARCO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORENO, João Roberto Sartori et al. Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA. International Journal of Advanced Engineering Research and Science, v. 5, n. 5, p. 150-157, 2018Tradução . . Disponível em: https://doi.org/10.22161/ijaers.5.5.20. Acesso em: 25 maio 2024.
APA
Moreno, J. R. S., Pinto, H. C., Correa, C. A., Mastelari, N., Marin, L. G., Silva, E., & Avila, J. A. (2018). Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA. International Journal of Advanced Engineering Research and Science, 5( 5), 150-157. doi:10.22161/ijaers.5.5.20
NLM
Moreno JRS, Pinto HC, Correa CA, Mastelari N, Marin LG, Silva E, Avila JA. Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA [Internet]. International Journal of Advanced Engineering Research and Science. 2018 ; 5( 5): 150-157.[citado 2024 maio 25 ] Available from: https://doi.org/10.22161/ijaers.5.5.20
Vancouver
Moreno JRS, Pinto HC, Correa CA, Mastelari N, Marin LG, Silva E, Avila JA. Cladding welding of CA6M with pulsed FCAW and results analysis through the L9 TAGUCHI and ANOVA [Internet]. International Journal of Advanced Engineering Research and Science. 2018 ; 5( 5): 150-157.[citado 2024 maio 25 ] Available from: https://doi.org/10.22161/ijaers.5.5.20
Artigo de periodico
Comparative study of properties in welding of a high strength steel and low alloy welded by processes helical and circumferential submerged arc (2018)
Moreno, João Roberto Sartori; Seloto, Bruna Berbel; Francisco, Julio César de Souza; Silva, Erenilton Pereira da; Pinto, Haroldo Cavalcanti ; Ávila Diaz, Julián Arnaldo
Source: Revista SODEBRAS. Unidade: EESC
Subjects: SOLDAGEM A ARCO, AÇO BAINITA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORENO, João Roberto Sartori et al. Comparative study of properties in welding of a high strength steel and low alloy welded by processes helical and circumferential submerged arc. Revista SODEBRAS, v. 13, n. 156, p. 134-138, 2018Tradução . . Disponível em: https://doi.org/10.29367/issn.1809-3957.2018.156. Acesso em: 25 maio 2024.
APA
Moreno, J. R. S., Seloto, B. B., Francisco, J. C. de S., Silva, E. P. da, Pinto, H. C., & Ávila Diaz, J. A. (2018). Comparative study of properties in welding of a high strength steel and low alloy welded by processes helical and circumferential submerged arc. Revista SODEBRAS, 13( 156), 134-138. doi:10.29367/issn.1809-3957.2018.156.
NLM
Moreno JRS, Seloto BB, Francisco JC de S, Silva EP da, Pinto HC, Ávila Diaz JA. Comparative study of properties in welding of a high strength steel and low alloy welded by processes helical and circumferential submerged arc [Internet]. Revista SODEBRAS. 2018 ; 13( 156): 134-138.[citado 2024 maio 25 ] Available from: https://doi.org/10.29367/issn.1809-3957.2018.156.
Vancouver
Moreno JRS, Seloto BB, Francisco JC de S, Silva EP da, Pinto HC, Ávila Diaz JA. Comparative study of properties in welding of a high strength steel and low alloy welded by processes helical and circumferential submerged arc [Internet]. Revista SODEBRAS. 2018 ; 13( 156): 134-138.[citado 2024 maio 25 ] Available from: https://doi.org/10.29367/issn.1809-3957.2018.156.
Artigo de periodico
On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS (2018)
Guimaraes, Mônica Costa Rodrigues; Castilho, Bruno César Noronha Marques de; Nossa, Tamires de Souza; Avila, Pedro Renato Tavares; Cucatti, Silvia; Alvarez, Fernando; Garcia, Jose Luis; Pinto, Haroldo Cavalcanti
Source: Surface & Coating Technology. Unidade: EESC
Subjects: TENSÃO RESIDUAL, CORROSÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUIMARAES, Mônica Costa Rodrigues et al. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS. Surface & Coating Technology, v. 340, p. 112-120, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2018.02.028. Acesso em: 25 maio 2024.
APA
Guimaraes, M. C. R., Castilho, B. C. N. M. de, Nossa, T. de S., Avila, P. R. T., Cucatti, S., Alvarez, F., et al. (2018). On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS. Surface & Coating Technology, 340, 112-120. doi:10.1016/j.surfcoat.2018.02.028
NLM
Guimaraes MCR, Castilho BCNM de, Nossa T de S, Avila PRT, Cucatti S, Alvarez F, Garcia JL, Pinto HC. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS [Internet]. Surface & Coating Technology. 2018 ; 340 112-120.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2018.02.028
Vancouver
Guimaraes MCR, Castilho BCNM de, Nossa T de S, Avila PRT, Cucatti S, Alvarez F, Garcia JL, Pinto HC. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS [Internet]. Surface & Coating Technology. 2018 ; 340 112-120.[citado 2024 maio 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2018.02.028
Artigo de periodico
Properties and parameters of application of the SAE 310 steel coatings over on SAE 1020 steel substrate, using coated electrode welding processes (2018)
Moreno, João Roberto Sartori; Correa, Celso Alves; Olivio, Émillyn Ferreira Trevisani; Pinto, Haroldo Cavalcanti
Source: Asian Journal of Science and Technology. Unidade: EESC
Subjects: REVESTIMENTOS, AÇO, SOLDAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORENO, João Roberto Sartori et al. Properties and parameters of application of the SAE 310 steel coatings over on SAE 1020 steel substrate, using coated electrode welding processes. Asian Journal of Science and Technology, v. 9, n. 4, p. 7866-7870, 2018Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/eb1dfca6-ef47-43c1-8601-9d851e6fccfb/sysno3004751_artigo%20completo%2025%20%281%29_removed.pdf. Acesso em: 25 maio 2024.
APA
Moreno, J. R. S., Correa, C. A., Olivio, É. F. T., & Pinto, H. C. (2018). Properties and parameters of application of the SAE 310 steel coatings over on SAE 1020 steel substrate, using coated electrode welding processes. Asian Journal of Science and Technology, 9( 4), 7866-7870. Recuperado de https://repositorio.usp.br/directbitstream/eb1dfca6-ef47-43c1-8601-9d851e6fccfb/sysno3004751_artigo%20completo%2025%20%281%29_removed.pdf
NLM
Moreno JRS, Correa CA, Olivio ÉFT, Pinto HC. Properties and parameters of application of the SAE 310 steel coatings over on SAE 1020 steel substrate, using coated electrode welding processes [Internet]. Asian Journal of Science and Technology. 2018 ; 9( 4): 7866-7870.[citado 2024 maio 25 ] Available from: https://repositorio.usp.br/directbitstream/eb1dfca6-ef47-43c1-8601-9d851e6fccfb/sysno3004751_artigo%20completo%2025%20%281%29_removed.pdf
Vancouver
Moreno JRS, Correa CA, Olivio ÉFT, Pinto HC. Properties and parameters of application of the SAE 310 steel coatings over on SAE 1020 steel substrate, using coated electrode welding processes [Internet]. Asian Journal of Science and Technology. 2018 ; 9( 4): 7866-7870.[citado 2024 maio 25 ] Available from: https://repositorio.usp.br/directbitstream/eb1dfca6-ef47-43c1-8601-9d851e6fccfb/sysno3004751_artigo%20completo%2025%20%281%29_removed.pdf

USP Schools

ReP

Filtros

Document Types

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration